TLE94713ESV33XUMA1 vs TLE75080ESDXUMA1 Vergleich
Detaillierter Direktvergleich von TLE94713ESV33XUMA1 von Infineon und TLE75080ESDXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLE94713ESV33XUMA1 | TLE75080ESDXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Voltage Regulators | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,31 | $2,55 |
| Product Type | Lite System Basis Chip (Lite SBC) | — |
| Main LDO Output Voltage | 5 V | — |
| Main LDO Output Current | 200 mA (typical) | — |
| Second LDO Output Voltage | 5 V (sensor supply, off-board protected) | — |
| Second LDO Output Current | 100 mA (typical) | — |
| Eingangsspannungsbereich | 5.5 V to 28 V (load-dump tolerant) | — |
| CAN Data Rate | Up to 5 Mbps (CAN FD) | — |
| CAN Standard | ISO 11898-1:2015 | — |
| Communication Interface | 16-bit SPI | 16-bit SPI (daisy-chain capable) |
| Gehäuse | PG-TSDSO-24-1 (TSSOP-24 EP) | PG-TSDSO-24-21 (exposed pad) |
| Betriebstemperaturbereich | -40 C to +125 C (automotive grade) | -40 C to +150 C |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL rating] | 2A |
| RoHS-Status | Compliant | Compliant |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| Number of Channels | — | 8 |
| Channel Configuration | — | High-side, N-channel MOSFET |
| Per-Channel Output Current | — | 330 mA |
| Supply Voltage Range | — | 4.5 V to 28 V |
| Load Dump Tolerance | — | 40 V |
| Cranking Voltage (Limp Home) | — | 3.0 V |
| On-State Resistance (typ per channel) | — | 1.5 ohm |
| Diagnostic Features | — | Open-load detect (on/off), overcurrent, overtemperature, short to battery/GND |
| Protection Functions | — | Reverse battery, load dump, thermal shutdown, current limit |