TLE94713ESV33XUMA1 vs TLE75080ESDXUMA1 Comparación
Comparación detallada lado a lado de TLE94713ESV33XUMA1 por Infineon y TLE75080ESDXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | TLE94713ESV33XUMA1 | TLE75080ESDXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Voltage Regulators | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,31 | $2,55 |
| Product Type | Lite System Basis Chip (Lite SBC) | — |
| Main LDO Output Voltage | 5 V | — |
| Main LDO Output Current | 200 mA (typical) | — |
| Second LDO Output Voltage | 5 V (sensor supply, off-board protected) | — |
| Second LDO Output Current | 100 mA (typical) | — |
| Rango de tensión de entrada | 5.5 V to 28 V (load-dump tolerant) | — |
| CAN Data Rate | Up to 5 Mbps (CAN FD) | — |
| CAN Standard | ISO 11898-1:2015 | — |
| Communication Interface | 16-bit SPI | 16-bit SPI (daisy-chain capable) |
| Encapsulado | PG-TSDSO-24-1 (TSSOP-24 EP) | PG-TSDSO-24-21 (exposed pad) |
| Rango de temperatura de funcionamiento | -40 C to +125 C (automotive grade) | -40 C to +150 C |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | [DATA_NEEDED: MSL rating] | 2A |
| Estado RoHS | Compliant | Compliant |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| Number of Channels | — | 8 |
| Channel Configuration | — | High-side, N-channel MOSFET |
| Per-Channel Output Current | — | 330 mA |
| Supply Voltage Range | — | 4.5 V to 28 V |
| Load Dump Tolerance | — | 40 V |
| Cranking Voltage (Limp Home) | — | 3.0 V |
| On-State Resistance (typ per channel) | — | 1.5 ohm |
| Diagnostic Features | — | Open-load detect (on/off), overcurrent, overtemperature, short to battery/GND |
| Protection Functions | — | Reverse battery, load dump, thermal shutdown, current limit |