TMP816PWR vs DRV8804PWPR Vergleich
Detaillierter Direktvergleich von TMP816PWR von Texas Instruments und DRV8804PWPR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
DRV8804PWPR - 65V 2.3A Quad Low-Side Driver | Texas Instruments
DRV8804PWPR ✓ AktivSpezifikationsvergleich
| Parameter | TMP816PWR | DRV8804PWPR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,39 | $2,12 |
| Topologie | Single-phase full-wave BLDC fan predriver | — |
| Supply Voltage (VCC) | 6 V to 16 V | — |
| Maximum Supply Voltage | 18 V | — |
| Load Voltage | 10 V | — |
| Output Current | 20 mA (gate drive to external PNP+NMOS) | — |
| Anzahl der Ausgänge | 1 (pre-driver output pair) | — |
| Current Limit Threshold | Adjustable (external resistor) | — |
| Betriebstemperaturbereich | -30 °C to +95 °C | — |
| Control Input | PWM speed command | — |
| Tachometer Output | FG (frequency-generator) signal | — |
| External Power Stage | PNP + N-channel MOSFET pair | — |
| Protection Features | Thermal shutdown, adjustable current limit, lock-rotor protection | — |
| Gehäuse | 20-pin TSSOP (PW), 4.40 mm width | HTSSOP-16 (PWP) with PowerPAD |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 1 (unlimited floor life at <30 °C / 85 % RH) | — |
| RoHS-Status | Compliant | Compliant |
| Lead-Free | Yes | — |
| Drive Method | Full-wave, sensored (Hall-element input) | — |
| Number of Channels | — | 4 (low-side) |
| Output Current (per channel) | — | 1.5 A (single channel on, SOIC DW package) |
| Output Current (per channel, all on) | — | 800 mA (HTSSOP PWP package) |
| Peak Output Current | — | 2.3 A |
| Supply Voltage (VM) | — | 8.2 V to 60 V |
| Logic Supply Voltage (VDD) | — | 3.0 V to 5.5 V |
| RDS(on) (per FET) | — | 500 mΩ typical |
| Control Interface | — | SPI (daisy-chainable) |
| Integrated Catch Diodes | — | Yes |
| Überstromschutz | — | Yes (per channel) |
| Thermisches Abschalten | — | Yes |
| Undervoltage Lockout | — | Yes |
| Betriebstemperatur | — | -40 C to +125 C |