TS321ID vs TLV9301IDBVR Vergleich
Detaillierter Direktvergleich von TS321ID von Texas Instruments und TLV9301IDBVR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
TLV9301IDBVR - 40V 1MHz RRO Op Amp SOT-23-5 | Texas Instruments
TLV9301IDBVR ✓ AktivSpezifikationsvergleich
| Parameter | TS321ID | TLV9301IDBVR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $0,21 |
| Product Type | Single bipolar operational amplifier | — |
| Amplifier Circuit Count | 1 circuit | — |
| Maximum Operating Voltage | 30 V | — |
| Gain-Bandwidth Product | 800 kHz | — |
| Betriebstemperaturbereich | -40 °C to +125 °C | -40 °C to +125 °C |
| Gehäuse | SOIC-8 (D) | SOT-23-5 (DBV) |
| Pin-Anzahl | 8 pins | — |
| Montageart | Surface mount | Surface Mount |
| Amplifier Classification | Standard general-purpose amplifier | — |
| Architecture | Bipolar | — |
| Product Positioning | Low-power, cost-sensitive | — |
| Versorgungsspannung | [DATA_NEEDED: supply voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate V/us] |
| Output Current | [DATA_NEEDED: output current] | — |
| Noise Voltage | [DATA_NEEDED: noise voltage] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Channels | — | 1 (Single) |
| Topologie | — | Standard (General Purpose) Op Amp |
| Ausgangstyp | — | Rail-to-Rail Output (RRO) |
| Input Type | — | CMOS (MUX-friendly, rail-to-rail on positive rail) |
| Gain Bandwidth Product (GBW) | — | 1 MHz |
| Input Offset Voltage (Vos) | — | ±0.5 mV (typ) |
| Input Offset Drift (dVos/dT) | — | ±2 µV/°C (typ) |
| Supply Voltage Range (Single Supply) | — | 2.7 V to 40 V |
| Supply Voltage Range (Split Supply) | — | ±1.35 V to ±20 V |
| Quiescent Current per Channel (Iq) | — | [DATA_NEEDED: Iq per channel µA/mA] |
| Output Current (Short-Circuit) | — | ±60 mA (typ short-circuit) |
| Common-Mode Rejection Ratio (CMRR) | — | [DATA_NEEDED: CMRR dB] |
| Power-Supply Rejection Ratio (PSRR) | — | [DATA_NEEDED: PSRR dB] |
| MSL-Level | — | [DATA_NEEDED: MSL level] |
| Automotive Grade (AEC-Q100) | — | Standard grade (AEC-Q100 variants exist in family) |