TS912IN vs TS912ID Vergleich
Detaillierter Direktvergleich von TS912IN von STMicroelectronics und TS912ID von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TS912IN | TS912ID |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Count | 2 channels | — |
| Product Type | Rail-to-rail CMOS dual operational amplifier | — |
| Supply Voltage Range | 2.7 V to 16 V | 2.7 V to 16 V |
| Supply Configuration | Single or dual supply | Single or dual supply |
| Eingangsspannungsbereich | Rail-to-rail | — |
| Ausgangsspannungsbereich | Rail-to-rail | Rail-to-rail |
| Typical Input Bias Current | 1 pA | — |
| Maximum Input Offset Voltage | 2 mV | — |
| Supply Current per Amplifier | 200 µA at VCC = 3 V | — |
| Specified Load | 600 Ω and 100 Ω | — |
| Input Protection | Latch-up immunity | — |
| ESD Tolerance | Supported | — |
| Gehäuse | 8-pin Mini DIP | 8-SOIC |
| Montageart | Through-hole | Surface mount |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| Gain Bandwidth Product | [DATA_NEEDED: gain bandwidth product] | — |
| Open Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 1.3 V/us |
| Amplifier Type | — | 2-circuit CMOS operational amplifier |
| Number of Channels | — | 2 channels |
| Gain-Bandwidth Product | — | 800 kHz |
| Input Common-Mode Range | — | Rail-to-rail |
| Technology | — | CMOS |
| Pin-Anzahl | — | 8 pins |
| Compensation | — | Frequency compensated |
| Output Current | — | [DATA_NEEDED: Output current] |
| Input Bias Current | — | [DATA_NEEDED: Input bias current] |
| Input Offset Voltage | — | [DATA_NEEDED: Input offset voltage] |
| Open-Loop Gain | — | [DATA_NEEDED: Open-loop gain] |