TS912IN vs TS912ID Comparaison
Comparaison détaillée côte à côte de TS912IN par STMicroelectronics et TS912ID par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TS912IN | TS912ID |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Count | 2 channels | — |
| Product Type | Rail-to-rail CMOS dual operational amplifier | — |
| Supply Voltage Range | 2.7 V to 16 V | 2.7 V to 16 V |
| Supply Configuration | Single or dual supply | Single or dual supply |
| Plage de tension d'entrée | Rail-to-rail | — |
| Plage de tension de sortie | Rail-to-rail | Rail-to-rail |
| Typical Input Bias Current | 1 pA | — |
| Maximum Input Offset Voltage | 2 mV | — |
| Supply Current per Amplifier | 200 µA at VCC = 3 V | — |
| Specified Load | 600 Ω and 100 Ω | — |
| Input Protection | Latch-up immunity | — |
| ESD Tolerance | Supported | — |
| Boîtier | 8-pin Mini DIP | 8-SOIC |
| Type de montage | Through-hole | Surface mount |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| Gain Bandwidth Product | [DATA_NEEDED: gain bandwidth product] | — |
| Open Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 1.3 V/us |
| Amplifier Type | — | 2-circuit CMOS operational amplifier |
| Number of Channels | — | 2 channels |
| Gain-Bandwidth Product | — | 800 kHz |
| Input Common-Mode Range | — | Rail-to-rail |
| Technology | — | CMOS |
| Nombre de broches | — | 8 pins |
| Compensation | — | Frequency compensated |
| Output Current | — | [DATA_NEEDED: Output current] |
| Input Bias Current | — | [DATA_NEEDED: Input bias current] |
| Input Offset Voltage | — | [DATA_NEEDED: Input offset voltage] |
| Open-Loop Gain | — | [DATA_NEEDED: Open-loop gain] |