VNH9030AQ vs VNH7070ASTR Vergleich
Detaillierter Direktvergleich von VNH9030AQ von STMicroelectronics und VNH7070ASTR von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
VNH9030AQ - 30A Automotive H-Bridge Motor Driver | STMicroelectronics
VNH9030AQ ✓ AktivSTMicroelectronics
VNH7070ASTR - 15A Automotive H-Bridge Motor Driver | STMicroelectronics
VNH7070ASTR ✓ AktivSpezifikationsvergleich
| Parameter | VNH9030AQ | VNH7070ASTR |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $5,44 | $3,16 |
| Output Current (Continuous) | 30 A | — |
| Supply Voltage Range | 4 V to 28 V | — |
| On-Resistance (per switch) | 25 mOhm | — |
| PWM Frequency | Up to 20 kHz | — |
| Betriebstemperaturbereich | -40C to +150C | — |
| Gehäuse | VFQFPN-32 (5x5 mm) | SO-16N (MultiWatt-15 derivative, exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Number of Channels | 1 (H-bridge) | — |
| Control Interface | PWM, IN1, IN2 | — |
| Diagnostic Output | Yes (open-drain) | — |
| Current Sense Output | Yes (analog) | — |
| Undervoltage Lockout | Yes | — |
| Überstromschutz | Yes | — |
| Thermisches Abschalten | Yes | — |
| RoHS-Status | Compliant | Compliant |
| AEC-Q100 Qualified | Yes | — |
| Motor Type | — | DC brushed motor |
| Ausgangskonfiguration | — | Full H-bridge (dual high-side + dual low-side) |
| Supply Voltage (VCC) | — | 4 V to 28 V |
| Continuous Output Current | — | 15 A |
| On-State Resistance per Switch (Ron) | — | 40 mOhm (typical) |
| PWM Frequency (max) | — | 20 kHz |
| Logic Input Compatibility | — | 3.3 V and 5 V CMOS |
| Current Sense Output (CS) | — | Analog proportional voltage |
| Diagnostic Output (DIAG) | — | Active-high fault flag |
| Protection Features | — | UVLO, overvoltage clamp, thermal shutdown, short-circuit, open-load |
| Betriebstemperatur | — | -40 C to +150 C (junction) |
| Technology | — | VIPower M0-7 |
| MSL-Level | — | 3 |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |