VNH9030AQ vs VNH7070ASTR Comparaison
Comparaison détaillée côte à côte de VNH9030AQ par STMicroelectronics et VNH7070ASTR par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
VNH9030AQ - 30A Automotive H-Bridge Motor Driver | STMicroelectronics
VNH9030AQ ✓ ActifSTMicroelectronics
VNH7070ASTR - 15A Automotive H-Bridge Motor Driver | STMicroelectronics
VNH7070ASTR ✓ ActifComparaison des spécifications
| Paramètre | VNH9030AQ | VNH7070ASTR |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,44 | $3,16 |
| Output Current (Continuous) | 30 A | — |
| Supply Voltage Range | 4 V to 28 V | — |
| On-Resistance (per switch) | 25 mOhm | — |
| PWM Frequency | Up to 20 kHz | — |
| Plage de température de fonctionnement | -40C to +150C | — |
| Boîtier | VFQFPN-32 (5x5 mm) | SO-16N (MultiWatt-15 derivative, exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Number of Channels | 1 (H-bridge) | — |
| Control Interface | PWM, IN1, IN2 | — |
| Diagnostic Output | Yes (open-drain) | — |
| Current Sense Output | Yes (analog) | — |
| Undervoltage Lockout | Yes | — |
| Protection contre les surintensités | Yes | — |
| Arrêt thermique | Yes | — |
| Statut RoHS | Compliant | Compliant |
| AEC-Q100 Qualified | Yes | — |
| Motor Type | — | DC brushed motor |
| Configuration de sortie | — | Full H-bridge (dual high-side + dual low-side) |
| Supply Voltage (VCC) | — | 4 V to 28 V |
| Continuous Output Current | — | 15 A |
| On-State Resistance per Switch (Ron) | — | 40 mOhm (typical) |
| PWM Frequency (max) | — | 20 kHz |
| Logic Input Compatibility | — | 3.3 V and 5 V CMOS |
| Current Sense Output (CS) | — | Analog proportional voltage |
| Diagnostic Output (DIAG) | — | Active-high fault flag |
| Protection Features | — | UVLO, overvoltage clamp, thermal shutdown, short-circuit, open-load |
| Température de fonctionnement | — | -40 C to +150 C (junction) |
| Technology | — | VIPower M0-7 |
| Niveau MSL | — | 3 |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |