A42MX09-2PLG84 - 14K Gate 5V FPGA 84-PLCC | Microchip
Teilenummer: A42MX09-2PLG84 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $32.5 | $32,50 |
| 10 | $30.2 | $302,00 |
| 100 | $27.8 | $2.780,00 |
| 500 | $25.6 | $12.800,00 |
| 1.000 | $23.9 | $23.900,00 |
A42MX09-2PLG84 Übersicht
An FPGA (Field Programmable Gate Array) is a semiconductor device containing programmable logic blocks and interconnects that the designer configures after manufacturing. FPGAs sit within the broader hierarchy of programmable logic devices, above CPLDs and PLDs in capacity, and the MX family is distinctive because it uses antifuse technology, which is one-time programmable, non-volatile, and inherently immune to configuration bitstream readout, making it a reliable single-chip ASIC alternative.
Key features include the efficient 5.0 V-tolerant 0.45 um architecture, dual voltage operation (3.3 V core logic compatibility alongside 5 V I/O), up to 2.5 kbits of configurable dual-port SRAM, fast wide-decode circuitry, and 100 MHz FIFO capability. The antifuse fabric requires no external configuration PROM or boot process, simplifying power-up design and improving system reliability in high-volume applications.
Architecturally, the MX family combines Actel's multiplexer-based combinational logic modules with flip-flop-based sequential elements, connected through a metal-to-metal antifuse interconnect programmed at the factory or in-house programming station. This yields low on-resistance interconnects, deterministic timing, and resistance to radiation-induced configuration upset compared to SRAM-based FPGAs.
Typical applications include legacy PLD consolidation onto a single low-cost chip, industrial control, mil/aerospace subsystems, and high-volume embedded control where 5 V I/O compatibility and single-chip integration are required.
Design consideration: because the device is one-time programmable, verify the design fully in simulation with Libero IDE before programming; plan I/O assignment carefully since antifuse FPGAs cannot be reconfigured in-circuit.
Drop-in-Alternativen für A42MX09-2PLG84 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit A42MX09-2PLG84 (gleiche Bauform und Footprint) – abweichend in Package, RoHS Status, Family, System Gates, Logic Cells.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
A42MX16-2PLG84I
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$30.8 / Stück
Datenblatt ansehen →A42MX16-3PLG84
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$1 / Stück
Datenblatt ansehen →A42MX16-1PLG84
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$44.2 / Stück
Datenblatt ansehen →A42MX24-3PLG84
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$44.2 / Stück
Datenblatt ansehen →A42MX09-FPLG84
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
A42MX09-2PLG84 Grenzwerte & elektrische Eigenschaften
| Family | 42MX (MX FPGA) |
| System Gates | 14000 |
| Logic Cells | 336 |
| User I/O | 72 |
| Speed Grade | -2 |
| Clock-to-Out | 5.6 ns |
| Internal Performance | up to 250 MHz (161 MHz / 269 MHz grade limits per FindIC) |
| Dual-Port SRAM | up to 2.5 kbits (family max), 5 ns access |
| FIFO Performance | 100 MHz (family) |
| Core Voltage | 3.3 V to 5 V (dual voltage, 0.45 um technology) |
| Supply Voltage Range | 3.0 V to 3.6 V and 4.5 V to 5.5 V |
| Technology | 0.45 um antifuse |
| Programming Type | One-Time Programmable (antifuse), non-volatile |
| Gehäuse | 84-LCC (J-Lead) / PLCC-84 |
| Montageart | Surface Mount |
A42MX09-2PLG84 84-lcc (j-lead) / plcc-84 Pinbelegungsleitfaden
Pinbelegung für A42MX09-2PLG84 (84-lcc (j-lead) / plcc-84-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für A42MX09-2PLG84.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
A42MX09-2PLG84 ist geeignet für 6 Anwendungs: Legacy PLD Consolidation, Industrial Control Systems, Mil/Aerospace Subsystems, High-Volume ASIC Prototyping, Embedded Bus Interface Logic, Test and Measurement Fixtures.
Legacy PLD Consolidation
The A42MX09-2PLG84 is purpose-built for merging multiple legacy PLDs and small CPLDs into a single chip. Its 5.0 V-tolerant 0.45 um architecture and dual 3.3 V/5 V supply operation let older 22V10-class PLD designs integrate without level shifters, while 14,000 system gates provide ample capacity for several devices at once. Because the antifuse fabric is one-time programmable and non-volatile, no configuration PROM or boot sequence is needed, preserving the deterministic power-up behavior of the original PLD design while reducing BOM count and board area.
Empfohlen
Industrial Control Systems
In factory automation and industrial controllers, the A42MX09-2PLG84 provides glue logic, sequencing, and interface control with deterministic antifuse timing. The dual 4.5-5.5 V and 3.0-3.6 V supply ranges allow direct connection to both legacy 5 V sensor buses and modern 3.3 V logic. Its 5.6 ns clock-to-out and 161-269 MHz grade limits support state machines and decode functions faster than typical CPLDs. Non-volatile one-time programming ensures the control logic is present at power-up without host processor intervention, an important reliability attribute in unattended industrial equipment.
Empfohlen
Mil/Aerospace Subsystems
Actel/Microsemi antifuse FPGAs have a long heritage in military and aerospace programs, and the A42MX09-2PLG84 continues that role in non-radiation-critical subsystems. The one-time-programmable configuration is immune to configuration-bit readout and power-up configuration upset, giving deterministic behavior that SRAM FPGAs cannot match without external mitigation. The metal-to-metal antifuse interconnect provides low on-resistance routing and resistance to latch-up. The PLCC-84 J-lead package suits high-reliability solder inspection and board-level rework practices common in defense production.
Empfohlen
High-Volume ASIC Prototyping
The MX family serves as a low-cost, single-chip ASIC alternative for high-volume products that previously used gate arrays. The A42MX09's antifuse fabric delivers deterministic timing comparable to mask-programmed logic, so a gate-array netlist can be mapped into the 42MX architecture using Libero IDE tools and evaluated before committing to mask costs. At 14,000 gates, the device covers small-to-medium ASIC front-end designs, and the -2 speed grade sustains internal clock rates up to 250 MHz, adequate for data-path and controller blocks in 5 V industrial product lines.
Empfohlen
Embedded Bus Interface Logic
The A42MX09-2PLG84 excels as address decoding, bus arbitration, and wait-state logic for legacy microprocessor systems. Its fast wide-decode circuitry and 100 MHz FIFO support (family capability) handle 5 V bus timing margins directly, while dual-port SRAM blocks (up to 2.5 kbits family-wide, 5 ns access) implement FIFOs and register files on-chip. Because configuration is non-volatile, bus logic is active from the first clock cycle, simplifying power-on reset design in systems where the processor boots immediately.
Empfohlen
Test and Measurement Fixtures
Production test fixtures and bed-of-nails boards benefit from the A42MX09's one-time-programmable, tamper-resistant configuration: test sequences cannot be altered in the field, protecting proprietary test IP. The 72 user I/O pins interface with 5 V legacy instrument lines and 3.3 V DUT domains, and 5.6 ns clock-to-out supports fast handshake timing. The low-cost PLCC-84 package suits fixture volumes where per-unit cost dominates, and DigiKey stock availability supports quick fixture rebuilds as of 2026-08-30.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für A42MX09-2PLG84 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | A42MX09-FPLG84 | A42MX16-2PLG84I | A42MX16-3PLG84 | A42MX24-3PLG84 |
|---|---|---|---|---|---|
| Package | PLCC-84 (PLG84) | PLCC-84 - same | PLCC-84 - same | PLCC-84 - same | PLCC-84 - same |
| Brand | Microchip Technology (Microsemi/Actel) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 14,000 | 14,000 | 24,000 | 24,000 | 36,000 |
| Speed Grade | -2 | -F (slower) | -2 | -3 | -3 |
| Supply Voltage | 3.0-3.6 V and 4.5-5.5 V | 3.0-3.6 V and 4.5-5.5 V | 3.0-3.6 V and 4.5-5.5 V | 3.0-3.6 V and 4.5-5.5 V | 3.0-3.6 V and 4.5-5.5 V |
| Technology | 0.45 um antifuse | 0.45 um antifuse | 0.45 um antifuse | 0.45 um antifuse | 0.45 um antifuse |
| Programming | One-time programmable, non-volatile | OTP antifuse | OTP antifuse | OTP antifuse | OTP antifuse |
Wichtigste Unterscheidungsmerkmale
- Non-volatile OTP antifuse configuration (vs. SRAM-based FPGAs (e.g., Xilinx/Intel parts))
- Dual 3.3 V / 5 V operation (vs. A42MX09-FPLG84 and modern FPGAs)
- Cost versus in-family density upgrade (vs. A42MX24-3PLG84)
Designhinweise
The A42MX09 is one-time programmable: once antifuse interconnects are burned, the device cannot be reprogrammed. Complete full functional simulation in Libero IDE (or Legacy Actel Designer) and verify I/O assignment against your PLCC-84 land pattern before programming. Budget for spare programmed devices; a design change requires new parts, unlike SRAM FPGAs. Order prototypes with margin of at least 20% over test quantity.
The dual-voltage architecture requires correct supply selection: connect 4.5-5.5 V for 5 V system I/O or 3.0-3.6 V for 3.3 V systems per the A42MX09 datasheet. Decouple each supply pin pair with 0.1 uF ceramic capacitors placed within 5 mm of the pin, plus bulk 10 uF per rail. Confirm current demand against your regulator, since antifuse fabric draws static current only during programming; runtime current is dominated by I/O switching.
The PLCC-84 J-lead package requires the standard JEDEC PLCC-84 land pattern; J-leads allow visual solder inspection and easier rework than QFP gull-wing leads. Keep 5 V switching I/O traces away from sensitive analog nets, and use a solid ground plane beneath the device. For programming via a programmer socket or in-system programming fixture, reserve access to dedicated programming pins as described in the A42MX09 programming documentation.
Compliance-Informationen
Compliance status not stated in the retrieved web data; confirm with Microchip product page or distributor compliance documents before order.
