A54SX32-PQ208M - 48K Gate FPGA, 174 I/O, PQFP-208 | Microchip
Teilenummer: A54SX32-PQ208M ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $1021.07 | $1.021,07 |
| 10 | $970.02 | $9.700,20 |
| 100 | $919 | $91.900,00 |
| 500 | $867.91 | $433.955,00 |
| 1.000 | $816.86 | $816.860,00 |
A54SX32-PQ208M Übersicht
An FPGA (Field Programmable Gate Array) is a semiconductor device containing programmable logic blocks and interconnects that designers configure in the field, sitting in the semiconductor hierarchy as a programmable logic IC below ASICs but above CPLDs in gate count. The Actel SX family uses a sea-of-modules architecture that simplifies design time, reduces design cost and power consumption, and shortens time to market for performance-intensive applications.
Key features of the A54SX32 include 3.7 ns clock-to-out (pin-to-pin), 0.1 ns input setup time, and 0.25 ns clock skew, enabling 66 MHz PCI single-chip integration with 100% resource utilization and 100% pin locking. The 3.3 V core operation with 5.0 V tolerant inputs eases interfacing with legacy 5 V logic in industrial systems.
Technically, the device is fabricated on a 0.35 um CMOS process and offers antifuse program-once security, which makes the configuration non-volatile, non-reprogrammable by third parties, and immune to configuration readback attacks - a distinct advantage over SRAM FPGAs where bitstream security matters.
Typical applications include industrial control, 66 MHz PCI interface glue logic integration, communications equipment, and military/aerospace subsystems where non-volatile, secure, single-chip FPGA integration is required.
Design consideration: verify the exact speed-grade suffix (standard M grade versus P1/PP faster grades) against your timing closure requirements, since the M grade runs 240 MHz maximum versus faster variants.
This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Drop-in-Alternativen für A54SX32-PQ208M – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit A54SX32-PQ208M (gleiche Bauform und Footprint) – abweichend in Package, Family, System Gates, User I/O, Process Technology.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
A54SX32-PQ208
✅ Drop-In✓ Auf Lager
$44.75 / Stück
Datenblatt ansehen →A54SX32-PQ208I
✅ Drop-In✓ Auf Lager
$272.19 / Stück
Datenblatt ansehen →A54SX32-PQG208M
✅ Drop-In✓ Auf Lager
$1269.95 / Stück
Datenblatt ansehen →A54SX32-1PQG208M
✅ Drop-In✓ Auf Lager
$44.6 / Stück
Datenblatt ansehen →A54SX32-2PQG208I
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →A54SX32-PPQ208M
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
A54SX32-PQ208M Grenzwerte & elektrische Eigenschaften
| Family | SX (54SX) FPGA |
| Equivalent System Gates | 48,000 |
| Programmable I/O Pins | 174 |
| Gehäuse | 208-BFQFP (PQFP-208), 28 x 28 mm |
| Terminal Pitch | 0.5 mm |
| Montageart | Surface Mount |
| Supply Voltage - Nominal | 3.3 V |
| Supply Voltage Range | 3.0 V to 3.6 V |
| I/O Tolerance | 5 V tolerant operation |
| Internal Performance | 320 MHz |
| Clock-to-Out (Pin-to-Pin) | 3.7 ns |
| Input Set-Up Time | 0.1 ns |
| Clock Skew | 0.25 ns |
| PCI Integration | 66 MHz PCI single-chip solution |
| Process Technology | 0.35 um CMOS |
| Programmability | Antifuse, one-time programmable, non-volatile |
| Pin Locking | 100% resource utilization with 100% pin locking |
| RoHS-Status | unknown |
A54SX32-PQ208M 208-bfqfp (pqfp-208), 28 x 28 mm Pinbelegungsleitfaden
Pinbelegung für A54SX32-PQ208M (208-bfqfp (pqfp-208), 28 x 28 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für A54SX32-PQ208M.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
A54SX32-PQ208M ist geeignet für 6 Anwendungs: 66 MHz PCI Interface Integration, Industrial Control Systems, Military and Aerospace Secure Logic, Legacy 5V Logic Consolidation, Communications Equipment, Test and Measurement Instruments.
66 MHz PCI Interface Integration
The A54SX32-PQ208M was explicitly designed to serve as a 66 MHz PCI single-chip integration solution. With 3.7 ns pin-to-pin clock-to-out, 0.1 ns input setup, and 0.25 ns clock skew, the device closes timing for 66 MHz PCI host and target state machines while absorbing glue logic such as bus arbiters, decoders, and FIFOs. Its 174 programmable I/O with 5 V tolerant inputs interfaces directly with legacy PCI components, and 100% pin locking allows the PCB to be finalized before design freeze.
Empfohlen
Industrial Control Systems
In industrial controllers and PLC I/O modules, the A54SX32-PQ208M integrates counters, encoders, communication interfaces, and sequencing logic that would otherwise require multiple CPLDs and discrete logic. The 3.3 V nominal supply with 5 V tolerant I/O allows direct connection to 24 V-system front ends conditioned by standard TTL-level circuitry. The antifuse configuration is immune to power-up configuration failures and configuration corruption from industrial noise, improving uptime compared with SRAM FPGAs in electrically harsh factory environments.
Empfohlen
Military and Aerospace Secure Logic
The antifuse SX family is a mainstay of defense and aerospace designs where bitstream security is mandatory. Because the A54SX32-PQ208M is programmed once and holds its configuration in silicon, there is no external configuration memory to intercept and no readback path for reverse engineering. Designers use it for mission computers, sensor interfaces, and bus controllers. For space and radiation-tolerant programs, Microchip's RTAX series (e.g., RTAX1000SL) provides a radiation-hardened evolution of this architecture.
Empfohlen
Legacy 5V Logic Consolidation
The A54SX32-PQ208M excels at replacing boards full of 5 V TTL/CMOS ASSP and PAL devices. Its 5 V tolerant inputs accept legacy signal levels directly, while 48,000 gates absorb address decoders, state machines, and bus transceivers into one 208-pin PQFP. Typical retrofits reduce board area, cut power, and improve reliability. Because the design can achieve 100% resource utilization with 100% pin locking, the migration can be executed without changing the existing backplane pin assignment.
Empfohlen
Communications Equipment
Line cards, protocol bridges, and backplane controllers in telecom racks use the A54SX32-PQ208M for framing, multiplexing, and glue logic at up to 320 MHz internal performance. The 0.25 ns clock skew supports distributed clocking across large register banks, and instant-on antifuse configuration eliminates boot delay in equipment that must link up within milliseconds of power application. The 28 x 28 mm PQFP offers a thermally robust, hand-inspectable package suited to long-service-life telecom hardware.
Empfohlen
Test and Measurement Instruments
Bench instruments and ATE modules deploy the A54SX32-PQ208M as a timing generator, trigger engine, and acquisition controller. The 0.1 ns input setup and 320 MHz internal performance allow fine-grained event capture, while 174 I/O connect to front-end ADCs, DACs, and panel interfaces. One-time programmability guarantees that a shipped instrument always powers up with the exact validated configuration, an advantage for calibration traceability and configuration control in metrology environments.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für A54SX32-PQ208M – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | A54SX32-PQ208 | A54SX32-PQ208I | A54SX32-PQG208M | A54SX32-PPQ208M |
|---|---|---|---|---|---|
| Package | 208-BFQFP (PQFP), 28 x 28 mm | 208-BFQFP - same | 208-BFQFP - same | 208-BFQFP green - same footprint | 208-BFQFP - same |
| Brand | Microchip Technology (Actel/Microsemi) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 48,000 | 48,000 (same die) | 48,000 (same die) | 48,000 (same die) | 32,000 equivalent / 2880 CLBs |
| Programmable I/O | 174 | 174 | 174 | 174 | 174 |
| Max Clock Frequency | 240 MHz (320 MHz internal) | 240 MHz | 240 MHz | 240 MHz | 240 MHz (P speed grade) |
| Supply Voltage | 3.0 V - 3.6 V (nominal 3.3 V), 5 V tolerant I/O | 3.3 V nominal, 5 V tolerant | 3.3 V nominal, 5 V tolerant | 3.3 V nominal, 5 V tolerant | 3.3 V nominal, 5 V tolerant |
| Temperature Grade | M grade (per suffix) | Commercial (0C to +70C) | Industrial (-40C to +85C) | M grade, green package | M grade |
| RoHS / Lead-Free Package | unknown (standard molded PQFP) | unknown | unknown | Yes (green/lead-free) | unknown |
Wichtigste Unterscheidungsmerkmale
- Mature 48K-gate antifuse security FPGA (vs. A54SX32-PPQ208M)
- Lead-free package option exists (vs. A54SX32-PQG208M)
- 5 V tolerant I/O on all 174 pins (vs. A54SX32-PQ208I)
- Instant-on, no configuration memory (vs. SRAM-based Xilinx/Altera FPGAs)
Designhinweise
Provide a regulated 3.3 V rail (3.0-3.6 V window) with local 0.1 uF ceramic decoupling on every VCC pin pair of the 208-pin PQFP, plus bulk 10-47 uF per bank. Antifuse FPGAs draw a programming current pulse during blow; ensure the supply can deliver the programming current specified in the family datasheet via the programmer (e.g., Silicon Sculptor). Do not share the VPP/programming supply rail with noise-sensitive analog circuitry.
The 5 V tolerant inputs still require controlled slew: terminate long backplane traces and respect the input edge-rate limits in the 54SX datasheet to avoid metastability. With 0.25 ns clock skew across the device, use balanced clock routing inside the FPGA and match trace lengths on the PCB for bus clocks above 50 MHz. Add series 22-33 ohm resistors on PCI-style outputs to control overshoot with 5 V legacy loads.
Antifuse devices are one-time programmable - a design change requires a new physical part, so fully verify timing in the Actel/Microchip Libero or Designer toolchain before programming production quantity. Confirm the exact speed-grade suffix (M vs 1, 2, P grades) against timing closure; dropping a faster grade into the same footprint is safe, but substituting a slower grade can fail timing. Keep unused I/O configured per datasheet guidance to avoid floating inputs.
Compliance-Informationen
RoHS status of the standard PQ208M package was not stated in the verified web data. For lead-free requirements, the A54SX32-PQG208M green-package variant should be evaluated.
