Analog Devices

AD504MH - 0.3 MHz Military Op Amp | Analog Devices

Teilenummer: AD504MH ✗ Abgekündigt
500 uV maximum Vdss 8-pin TO-99 Package
MOQ: 1 |

AD504MH Übersicht

The Analog Devices AD504MH is a single general-purpose operational amplifier with a maximum offset voltage of 500 uV, a 0.3 MHz gain-bandwidth product, and an 18 V supply rating. It is packaged in a hermetically sealed, round 8-pin TO-99 metal package with wire terminals, making it suited to military-grade and precision analog signal-conditioning equipment.

An operational amplifier is an active semiconductor device that amplifies the difference between two input voltages. Within the broader hierarchy of an op amp, analog amplifier, voltage amplifier, and semiconductor, the AD504MH provides high open-loop gain, differential input capability, and an output stage suitable for low-frequency precision control systems. Its general-purpose architecture allows it to support feedback-based signal conditioning without a fixed internal application.

The AD504MH's headline characteristics include a 500 uV maximum input offset voltage, a 0.3 MHz bandwidth, an 18 V maximum supply rating, and a nominal slew rate of 0.12 V/us. The offset specification supports accurate DC amplification, while the 0.3 MHz bandwidth identifies the device as a low-frequency amplifier rather than a high-speed signal-conditioning component. The hermetic TO-99 construction supports use in environments where mechanical protection and stable electrical performance are important.

This older military-grade amplifier is used for precision DC amplification, feedback control, instrumentation, low-frequency filter stages, and signal conversion. Its 0.12 V/us slew rate limits large-signal response, so applications should avoid demanding full-bandwidth operation or fast pulse reproduction. Input and output timing should also be checked against the 0.3 MHz bandwidth rather than the much higher open-loop gain available at low frequencies.

Typical circuit roles include amplifier stages in test and measurement systems, sensor-signal conditioning, servo or feedback control, analog reference systems, and low-frequency active filters. The single-amplifier configuration permits direct implementation of inverting, non-inverting, differential, and comparator-style arrangements when the system operating conditions support them. The 8-pin metal-can package also offers a mechanically robust alternative to modern plastic packages.

Circuit implementation requires attention to supply decoupling, input common-mode range, output swing, bias-current effects, and stability with the selected feedback network. Place suitable bypass capacitance close to the supply pins, keep feedback-loop routing compact, and verify loop gain against the amplifier's frequency response. Because this is a hermetically sealed TO-99 device, lead bending and soldering should use procedures suited to metal packages.

This product record consolidates the AD504MH's confirmed electrical and mechanical characteristics, sourcing information, package details, and application-oriented engineering guidance. It also distinguishes confirmed ratings from parameters that require consultation of the manufacturer datasheet before release of a production design.

Drop-in-Alternativen für AD504MH – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

AD504MH Grenzwerte & elektrische Eigenschaften

Product Type Single general-purpose operational amplifier
Input Offset Voltage 500 uV maximum
Gain-Bandwidth Product 0.3 MHz
Maximum Supply Voltage 18 V
Nominal Slew Rate 0.12 V/us
Number of Amplifiers 1 amplifier
Gehäuse 8-pin TO-99
Package Shape Round
Package Construction Hermetically sealed
Terminal Form Wire
Number of Terminals 8 terminals
Temperature Grade Military grade
Montageart Through-hole

AD504MH hermetically sealed Pinbelegungsleitfaden

Pinbelegung für AD504MH (hermetically sealed-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für AD504MH im hermetically sealed-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für AD504MH.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

AD504MH ist geeignet für 6 Anwendungs: Precision Instrumentation Signal Conditioning, Military Feedback Control, Low-Frequency Active Filter, Sensor Interface Amplification, Test and Measurement Front End, Power Supply Feedback Monitoring.

🔧

Precision Instrumentation Signal Conditioning

The AD504MH fits low-frequency precision signal-conditioning stages because its 500 uV maximum input offset voltage limits DC error when the amplifier operates with appreciable closed-loop gain. The 0.3 MHz bandwidth is suitable for sensors, measurement transducers, and laboratory signals that require amplification rather than high-speed waveform capture. A practical implementation places the amplifier in an inverting or non-inverting feedback network and places the compensation or feedback components close to the device. The main trade-off is the 0.12 V/us nominal slew rate, which restricts large-signal bandwidth. Input common-mode range, output swing, bias current, and noise must be confirmed from the manufacturer datasheet before setting the gain and operating range.

✈️

Military Feedback Control

The AD504MH is appropriate for legacy military feedback-control blocks where hermetic sealing, the military-grade designation, and preservation of the 8-pin TO-99 interface are priorities. Its 0.3 MHz gain-bandwidth product can support servo, actuator, and feedback loops operating well below that frequency, while the 500 uV maximum offset helps reduce command-error contribution in DC-coupled control paths. The implementation should use conservative loop gain and compensation because both the closed-loop bandwidth and nominal 0.12 V/us slew rate limit transient response. Designers must also observe the 18 V supply rating, verify input and output operating ranges, and use the manufacturer package drawing for lead spacing and orientation in ruggedized equipment.

🌐

Low-Frequency Active Filter

The AD504MH can form an active low-pass or band-pass stage in systems that need gain and filtering around DC or low audio-rate frequencies. Its 0.3 MHz gain-bandwidth product leaves headroom below the closed-loop cutoff selected for the feedback network, while the 500 uV maximum offset supports low-frequency operation where offset drift becomes important. Component tolerances and the amplifier's open-loop response directly influence filter accuracy, so simulate the complete network rather than assuming ideal behavior. Keep the feedback loop compact and verify phase margin across the intended passband. The 0.12 V/us nominal slew rate should be checked against the largest expected transient, and supply bypassing should be placed close to the TO-99 leads.

🧩

Sensor Interface Amplification

The AD504MH is useful for amplifying outputs from relatively slow sensors where low offset and simple single-amplifier implementation are important. A 500 uV maximum input offset specification is helpful when the sensor signal is small and the closed-loop noise gain is high, while the 0.3 MHz bandwidth readily covers many temperature, position, pressure, and strain-gauge conditioning channels. The circuit must remain within the amplifier's input common-mode range and output swing, particularly when using a single supply. Bias-current compensation may be needed for high-impedance sources. Confirm the source impedance, sensor excitation scheme, cable capacitance, and expected temperature range in the manufacturer datasheet before finalizing the input network.

📺

Test and Measurement Front End

The AD504MH can serve as the analog front-end amplifier in legacy test and measurement equipment that operates primarily at low frequencies. The 500 uV maximum input offset helps preserve accuracy when the front end amplifies small DC or slowly changing signals, and the single-amplifier format provides a straightforward route to inverting, non-inverting, or differential configurations. The 0.3 MHz bandwidth is suitable for many process-control and analog diagnostic measurements but does not support high-speed digitizer front ends. Use short feedback paths, verify stability with the intended source and load impedances, and select capacitors that remain appropriate across the operating range. The hermetically sealed TO-99 construction supports installation in long-life analytical or industrial test systems.

⚡

Power Supply Feedback Monitoring

The AD504MH can amplify small voltage-deviation signals for slow power-supply feedback or supervisory monitoring circuits. Its 500 uV maximum input offset is meaningful when the monitored deviation is small, and its 0.3 MHz bandwidth covers control loops that do not require high-frequency transient reproduction. A practical design compares the feedback signal with a reference, amplifies the resulting error, and uses the output as a correction or monitoring signal. The designer must verify that the common-mode voltage at the amplifier inputs remains inside its permitted range under minimum and maximum supply conditions. The nominal 0.12 V/us slew rate is adequate only when correction signals change slowly. Use local decoupling and maintain a compact feedback loop to reduce susceptibility to board noise.

What is the AD504MH?
The AD504MH is a single general-purpose operational amplifier from Analog Devices with a 500 uV maximum input offset voltage, a 0.3 MHz gain-bandwidth product, and an 18 V supply rating. According to the AD504MH manufacturer datasheet, it is a military-grade device in a hermetically sealed 8-pin TO-99 package with wire terminals. It is intended for low-frequency precision amplification, feedback control, and analog signal-conditioning applications.
What is the bandwidth of the AD504MH?
The AD504MH has a 0.3 MHz gain-bandwidth product. According to the manufacturer datasheet, this bandwidth makes it suitable for low-frequency precision and feedback applications rather than wideband signal processing. A closed-loop gain of 10 would provide approximately 30 kHz bandwidth under the usual gain-bandwidth relationship, although the actual usable response must also be checked for stability and slew-rate limits.
What is the maximum offset voltage of the AD504MH?
The AD504MH has a maximum input offset voltage of 500 uV. According to the manufacturer datasheet, this parameter defines the differential input voltage required to bring the amplifier output into the intended operating region. The value is important in DC-coupled instrumentation because input offset voltage can appear directly as output error when multiplied by the closed-loop noise gain.
What package does the AD504MH use?
The AD504MH uses an 8-pin TO-99 package with a round metal body, wire terminals, and hermetic sealing. The package information in the manufacturer datasheet identifies the lead form and circular construction. Because TO-99 is not represented by a dedicated package drawing in the available diagram library, use the manufacturer package drawing for board layout, hole coordinates, and polarity orientation.
Where can I download the AD504MH datasheet PDF?
The AD504MH datasheet PDF should be obtained from the Analog Devices product documentation or through the official datasheet link on this page. The manufacturer document is the controlling reference for pin assignments, electrical characteristics, test conditions, package drawings, and ordering information. Use the pin-description table and package outline in that document when creating the PCB footprint and checking the lead orientation.
Where can I find the AD504MH pinout?
The AD504MH pinout must be taken from the pin-description table in the Analog Devices AD504MH manufacturer datasheet. The component uses an 8-pin TO-99 package, but its exact terminal functions cannot be reproduced reliably without the corresponding numbered package drawing. Verify every pin against that table before wiring a prototype, particularly the supply, offset-null, output, and compensation-related terminals.
Is the AD504MH suitable for precision DC amplification?
The AD504MH is suitable for precision DC amplification when its 500 uV maximum offset voltage and 0.3 MHz bandwidth meet the system requirements. According to the manufacturer datasheet, the low offset specification reduces error in high-gain DC-coupled circuits. Check input bias current, input common-mode range, output swing, and noise specifications in the datasheet before fixing the closed-loop gain.
Can the AD504MH replace a general-purpose TO-99 op amp?
The AD504MH can replace a general-purpose TO-99 op amp only if the original device has the same 8-pin terminal arrangement and equivalent electrical ratings. No verified drop-in substitute was identified for the AD504MH, so compatibility must be established from manufacturer pinout and datasheet data rather than from package shape alone. Check offset, bandwidth, supply voltage, slew rate, common-mode range, output swing, and compensation requirements.
What is the best drop-in replacement for the AD504MH?
No confirmed drop-in replacement for the AD504MH is available from the manufacturer and cross-reference information used for this record. A valid replacement must use the same 8-pin TO-99 footprint, preserve terminal functions, and remain within the required offset, bandwidth, supply, and common-mode limits. Do not select a substitute solely because it is labeled a precision or military op amp in a similar package.
AD504MH versus a modern precision op amp: which is better?
The AD504MH is preferable when an existing design specifically requires its 500 uV maximum offset, 0.3 MHz bandwidth, hermetically sealed 8-pin TO-99 construction, and military-grade designation. A modern amplifier may offer lower noise, wider bandwidth, smaller size, or easier automated assembly. The correct choice depends on whether preserving the original footprint and qualification is more important than newer performance and availability.
When should I choose the AD504MH over another precision amplifier?
Choose the AD504MH when maintaining a legacy 8-pin TO-99 circuit is essential and the replacement must preserve the confirmed 500 uV maximum offset, 0.3 MHz bandwidth, and 18 V supply rating. Its hermetic metal package can also be valuable in mechanically demanding legacy equipment. For new compact or high-speed designs, a modern amplifier may provide a better balance of performance, size, and sourcing flexibility.
Is the AD504MH suitable for sensor and instrumentation amplifiers?
The AD504MH can be used in low-frequency instrumentation and sensor-conditioning stages because it provides a 500 uV maximum offset voltage and 0.3 MHz bandwidth. According to the manufacturer datasheet, its general-purpose single-amplifier configuration supports standard feedback networks. Verify the sensor source impedance, required common-mode range, output swing, noise performance, and filter stability before deployment.
What are the key specifications of the AD504MH that engineers should know?
The AD504MH is a single general-purpose op amp with a 500 uV maximum input offset, 0.3 MHz gain-bandwidth product, 18 V supply rating, and 0.12 V/us nominal slew rate. It is a military-grade, hermetically sealed device in an 8-pin TO-99 package with wire terminals. These figures define it as a low-frequency precision amplifier rather than a high-speed or low-noise modern wideband part.
Where can I buy the AD504MH online?
Use the Request a Quote form on this page to request AD504MH availability, lot conditions, and a current quotation. Because this is a legacy hermetically sealed TO-99 amplifier, traceability, remaining stock, and exact suffix handling can be important purchasing criteria. Provide the target quantity and required delivery date with the request so the current commercial response can be matched to the project schedule.
What is the price and lead time of the AD504MH?
Current AD504MH price and lead time are handled through the Request a Quote form on this page rather than through a static price table. For a legacy military-grade TO-99 device, the quotation should identify manufacturer, package suffix, stock status, traceability, and delivery quantity. Request the lead time for the exact quantity required by production and any acceptable equivalent manufacturers before setting the purchase schedule.
Is the AD504MH currently in stock?
The AD504MH's current stock status must be confirmed through the Request a Quote form on this page. No fixed production quantity should be inferred from a marketplace listing because legacy hermetic devices can be limited by remaining inventory, test traceability, and assembly capacity. Specify the required quantity, date code preference, inspection level, and acceptable lead time so the quotation can reflect the current supply position.
What design constraints matter when using the AD504MH?
The main design constraints are its 0.3 MHz bandwidth, 0.12 V/us nominal slew rate, and 18 V supply rating. According to the manufacturer datasheet, the amplifier is a low-frequency general-purpose device, so large-signal and high-frequency feedback behavior require careful review. Compact feedback routing, appropriate supply bypassing, stable compensation, and verification of input common-mode range and output swing are essential.

Technische Referenzdaten für AD504MH – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the AD504MH when repairing or preserving legacy circuitry that explicitly calls for the AD504MH and requires its 8-pin TO-99 footprint, hermetically sealed package, 500 uV maximum offset, 0.3 MHz bandwidth, and military-grade identification. It is most appropriate for low-frequency precision, feedback-control, instrumentation, and sensor-conditioning paths where modern high-speed amplifier performance is unnecessary. A modern precision amplifier can be preferable in a new design because it may offer lower noise, smaller size, easier assembly, and broader availability, but it should not be treated as a drop-in substitute without a complete pinout and electrical comparison. No confirmed pin-compatible substitute was identified for the AD504MH, so engineers should retain the original device when footprint preservation, qualification continuity, or known prior behavior is critical.

Vergleich mit Alternativen

Parameter Dieses Produkt
Brand Analog Devices
Package 8-pin TO-99
Product Type Single general-purpose operational amplifier
Maximum Offset Voltage 500 uV
Gain-Bandwidth Product 0.3 MHz
Maximum Supply Voltage 18 V
Nominal Slew Rate 0.12 V/us
Temperature Grade Military grade
Package Construction Hermetically sealed
Terminal Form Wire

Wichtigste Unterscheidungsmerkmale

  • Maximum input offset voltage (vs. No confirmed replacement MPN)
  • Hermetically sealed metal package (vs. No confirmed replacement MPN)
  • Military-grade identification (vs. No confirmed replacement MPN)

Designhinweise

Use the Analog Devices TO-99 package drawing to define lead spacing, drill diameters, and pin-one orientation before releasing the board layout. Place the device near the associated feedback components and route the feedback loop as a short, compact path. Because this is a through-hole hermetic package rather than a surface-mount device, inspect lead alignment after insertion and avoid excessive force that could stress the glass-to-metal seals.

The AD504MH has a 0.3 MHz gain-bandwidth product and a nominal 0.12 V/us slew rate, so stability and transient response depend strongly on the selected feedback network. Simulate the complete loop with the intended source impedance, load, and compensation values. Keep feedback components close to the amplifier, maintain a short ground return, and verify phase margin before adding high-frequency noise, capacitive loading, or cable-driven input capacitance.

Estimated: with an 18 V maximum supply rating, the amplifier must be operated within the manufacturer limits for supply voltage, input common-mode range, and output swing. Keep the supply rails below 18 V, add appropriate bypass capacitance at the device, and account for startup and transient current in the power architecture. Confirm the actual operating current from the AD504MH datasheet before sizing the supply and ground-return components.

Do not treat the 8-pin TO-99 package shape as proof of pin compatibility. The pin functions, compensation requirements, offset-null connections, common-mode range, and output limits must be checked against the AD504MH manufacturer datasheet. Also avoid assuming that any other military-grade op amp is interchangeable; use the exact terminal assignment and electrical limits for the proposed replacement before energizing the circuit.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The military-grade designation is confirmed, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was found for this MPN. Verify the applicable compliance status with the manufacturer before using the part in a regulated production design.

Daten verifiziert am: 2026-11-14 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

AD504MH datasheet AD504MH pinout AD504MH datasheet pdf AD504MH equivalent AD504MH replacement AD504MH TO-99 op amp AD504MH 500 uV offset AD504MH 0.3 MHz bandwidth AD504MH price AD504MH stock Analog Devices AD504MH AD504MH military amplifier

Verwandte Bauteile & Begriffe

Analog Devices AD504MH AD504 Operational amplifier Op amp Analog amplifier Voltage amplifier Semiconductor Precision amplifier General-purpose amplifier 500 uV input offset voltage 0.3 MHz gain-bandwidth product 0.12 V/us slew rate 18 V supply voltage 8-pin TO-99 package TO-99 package family Hermetically sealed package Wire terminal Through-hole mounting Military-grade component Feedback control Signal conditioning Precision instrumentation Active filter Sensor interface
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen