AD6654BBC - 14-Bit 92.16 MSPS 4/6-Channel IF Receiver | Analog Devices
Teilenummer: AD6654BBC ✗ AbgekündigtAD6654BBC Übersicht
A wideband IF-to-baseband receiver combines an analog-to-digital converter with programmable digital down-conversion. The ADC converts wideband intermediate-frequency signals into digital data, while the DDC stages reduce those data streams toward baseband for subsequent demodulation, filtering, or FFT processing. This integration can reduce the number of separate analog and digital components required in RF and communications signal chains.
The AD6654BBC provides a 14-bit conversion resolution and a maximum sampling rate of 92.16 MSPS. Its internal 2.4 V reference and 2.2 V peak-to-peak analog input range support repeatable receiver design, while the internal differential track-and-hold circuit helps capture wideband IF signals. The family supports multimode processing for WCDMA and other communications standards.
The principal distinction between the six-channel and four-channel devices is channel availability. In the four-channel version, Channel 4 and Channel 5 are not available; the remaining converter and digital-processing architecture is otherwise focused on the same wideband IF receiver use case. The AD6654BBC is identified by Analog Devices as not recommended for new designs.
Typical applications include wireless infrastructure receivers, WCDMA base-station equipment, communications test systems, software-defined radio platforms, and wideband IF digitization. The high conversion rate is useful when a system must sample substantial IF bandwidth directly before performing digital channelization or demodulation.
The 256-CSPBGA package requires careful PCB layout, including controlled escape routing from the fine-pitch array and adequate power and ground-plane integrity. Because the manufacturer identifies the device as not recommended for new designs, engineers should verify lifecycle availability, documentation revisions, and the required software configuration before committing a new design.
This page consolidates the manufacturer product information, datasheet references, package characteristics, receiver-function context, and design guidance for engineers evaluating the AD6654BBC. The Request a Quote form on this page can be used to discuss sourcing, lifecycle status, and package-related procurement requirements without relying on stale static price information.
Drop-in-Alternativen für AD6654BBC – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
AD6654BBCZ
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
AD6654BBC Grenzwerte & elektrische Eigenschaften
| Device Type | 14-bit, 92.16 MSPS, 4-/6-channel wideband IF-to-baseband receiver |
| Auflösung | 14 bit |
| Maximum Sampling Rate | 92.16 MSPS |
| IF Sampling Frequency | Up to 200 MHz |
| Channel Count | 4 or 6 channels; Channel 4 and Channel 5 are unavailable on the 4-channel version |
| ADC Architecture | Pipelined, 1 input |
| Analog Input Range | 2.2 V peak-to-peak |
| Internal Reference Voltage | 2.4 V |
| Input Circuit | Internal differential track-and-hold |
| Digital Down-Conversion | 4-/6-channel multimode DDC |
| Supported Signal Modes | Multimode WCDMA processing |
| Gehäuse | 256-CSPBGA, 17 x 17 mm |
| Package Pin Count | 256 pins |
| Montageart | Surface mount |
| AEC-Q100 Qualification | Not applicable |
| Lifecycle Recommendation | Not recommended for new designs |
AD6654BBC 256 pins Pinbelegungsleitfaden
Pinbelegung für AD6654BBC (256 pins-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für AD6654BBC.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
AD6654BBC ist geeignet für 6 Anwendungs: WCDMA Base-Station Receiver, Software-Defined Radio Platform, Wideband IF Test and Measurement, Communications Channel Analyzer, RF-to-IF Digital Receiver, Multi-Channel Digital Receiver.
WCDMA Base-Station Receiver
The AD6654BBC fits WCDMA base-station receiver designs because its integrated DDC can process up to six WCDMA channels and its ADC samples at up to 92.16 MSPS. The receiver can digitize a wideband IF signal and perform channelization digitally, reducing the amount of analog channelization required before the data reaches an FPGA or DSP. The trade-off is lifecycle exposure because Analog Devices marks the device as not recommended for new designs, so availability and configuration support require confirmation before a new deployment.
Empfohlen
Software-Defined Radio Platform
AD6654BBC is suitable for software-defined radio platforms that need a high-speed IF input and programmable channelization close to the antenna front end. Its 14-bit, 92.16 MSPS conversion rate provides sufficient sampling bandwidth for multichannel wideband receiver chains, while the integrated DDC performs part of the frequency translation and filtering digitally. This integration can simplify the FPGA interface, but the receiver must be designed around the exact four- or six-channel resource layout and validated for the target signal bandwidth.
Empfohlen
Wideband IF Test and Measurement
AD6654BBC can serve as the conversion element in a wideband IF digitization instrument where several modulated channels must be captured from one analog input. The 92.16 MSPS maximum rate and IF support to 200 MHz allow direct sampling of a selected intermediate-frequency band, while the internal DDC produces lower-rate digital outputs for analysis. Instrument designers should carefully separate analog and digital power domains, control clock jitter, and verify that the selected variant exposes the required processing channels.
Empfohlen
Communications Channel Analyzer
The AD6654BBC supports communications channel-analysis systems that need to observe multiple WCDMA carriers without building a separate converter for each channel. A wideband analog front end can feed the 2.2 V peak-to-peak differential input, and the on-chip digital down-converters can divide the sampled stream into lower-rate channels. This reduces analog duplication but concentrates functional risk in the device lifecycle, making a documented procurement plan especially important for long-lived test systems.
Empfohlen
RF-to-IF Digital Receiver
AD6654BBC is appropriate for an RF-to-IF receiver that performs antenna filtering, mixing, and analog gain control before performing high-rate digitization. Its 14-bit resolution and 92.16 MSPS sampling rate support wideband IF capture, and the integrated DDC moves much of the channel-selection workload into the digital domain. The design must maintain differential input integrity, provide suitable reference and clocking, and account for the receiver's not-recommended-for-new-designs status during platform planning.
Empfohlen
Multi-Channel Digital Receiver
AD6654BBC is suited to multi-channel digital receivers where one shared ADC front end can feed several independently processed WCDMA channels. The six-channel version provides the broadest channel count, while the four-channel version omits Channel 4 and Channel 5. In a multi-channel installation, designers should align RF gain and filter paths with each enabled DDC channel and verify synchronization, latency, and output interfaces. Because this is a complex mixed-signal device, register configuration and thermal design require careful review.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für AD6654BBC – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | AD6654BBCZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 256-CSPBGA (17 x 17 mm) | 256-pin BGA |
| Resolution | 14 bit | 14 bit |
Wichtigste Unterscheidungsmerkmale
- Integrated wideband receiver processing (vs. AD6654BBCZ)
- Direct IF sampling capability (vs. AD6654BBCZ)
- Established four- and six-channel configuration distinction (vs. AD6654BBCZ)
Designhinweise
Implement the 256-CSPBGA footprint directly from the Analog Devices package drawing and land-pattern guidance. Keep analog, digital, clock, reference, and supply connections within the manufacturer-recommended placement zones. Fine-pitch escape routing should be reviewed for shorts, via-in-pad restrictions, solder mask relief, and assembly capability before the PCB is released.
Treat the 2.2 V peak-to-peak differential analog input and the device clock as high-speed signals. Use symmetrical routing, short connections, continuous reference planes, and controlled return paths, and follow the datasheet input-network recommendations. Avoid adding long stubs or discontinuities that could degrade converter performance or create clock-related sampling errors.
Confirm whether the design requires four or six processing channels before assigning digital resources. The four-channel AD6654 version does not make Channel 4 or Channel 5 available. Also verify the exact suffix, electrical limits, register configuration, clock requirements, and supported software or firmware environment because lifecycle status and configuration differences can prevent a seemingly identical part from working correctly.
Separate analog, digital, clock, and supply connections according to the manufacturer reference schematic and pin requirements. Provide adequate local decoupling at each supply pin and use a power-distribution network that minimizes impedance between the device and its capacitors. Do not infer the required supply voltages or capacitor values without checking the official datasheet and board-design guidance.
Compliance-Informationen
The manufacturer product page identifies the device as not recommended for new designs. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed in the available source text.