Analog Devices

AD6654BBC - 14-Bit 92.16 MSPS 4/6-Channel IF Receiver | Analog Devices

부품 번호: AD6654BBC ✗ 단종
2.4 V Vdss 256-CSPBGA, 17 x 17 mm Package Up to 200 MHz Speed
MOQ: 1 |

AD6654BBC 개요

The Analog Devices AD6654BBC is a 14-bit, 92.16 MSPS mixed-signal wideband IF-to-baseband receiver with integrated digital down-conversion, designed for communications and signal-processing systems. It supports IF sampling frequencies up to 200 MHz, includes four or six receive channels depending on the device variant, and is supplied in a 256-CSPBGA package measuring 17 x 17 mm.

A wideband IF-to-baseband receiver combines an analog-to-digital converter with programmable digital down-conversion. The ADC converts wideband intermediate-frequency signals into digital data, while the DDC stages reduce those data streams toward baseband for subsequent demodulation, filtering, or FFT processing. This integration can reduce the number of separate analog and digital components required in RF and communications signal chains.

The AD6654BBC provides a 14-bit conversion resolution and a maximum sampling rate of 92.16 MSPS. Its internal 2.4 V reference and 2.2 V peak-to-peak analog input range support repeatable receiver design, while the internal differential track-and-hold circuit helps capture wideband IF signals. The family supports multimode processing for WCDMA and other communications standards.

The principal distinction between the six-channel and four-channel devices is channel availability. In the four-channel version, Channel 4 and Channel 5 are not available; the remaining converter and digital-processing architecture is otherwise focused on the same wideband IF receiver use case. The AD6654BBC is identified by Analog Devices as not recommended for new designs.

Typical applications include wireless infrastructure receivers, WCDMA base-station equipment, communications test systems, software-defined radio platforms, and wideband IF digitization. The high conversion rate is useful when a system must sample substantial IF bandwidth directly before performing digital channelization or demodulation.

The 256-CSPBGA package requires careful PCB layout, including controlled escape routing from the fine-pitch array and adequate power and ground-plane integrity. Because the manufacturer identifies the device as not recommended for new designs, engineers should verify lifecycle availability, documentation revisions, and the required software configuration before committing a new design.

This page consolidates the manufacturer product information, datasheet references, package characteristics, receiver-function context, and design guidance for engineers evaluating the AD6654BBC. The Request a Quote form on this page can be used to discuss sourcing, lifecycle status, and package-related procurement requirements without relying on stale static price information.

드롭인 대체품: AD6654BBC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

AD6654BBCZ

✅ 드롭인
📦 256-CSPBGA (17 x 17 mm)
Same 256-pin BGA format and broadly consistent functionality; some electrical characteristics differ.

📋 참조 대체품 (카탈로그에 없음)

AD6654BBC 최대 정격 & 전기적 특성

Device Type 14-bit, 92.16 MSPS, 4-/6-channel wideband IF-to-baseband receiver
분해능 14 bit
Maximum Sampling Rate 92.16 MSPS
IF Sampling Frequency Up to 200 MHz
Channel Count 4 or 6 channels; Channel 4 and Channel 5 are unavailable on the 4-channel version
ADC Architecture Pipelined, 1 input
Analog Input Range 2.2 V peak-to-peak
Internal Reference Voltage 2.4 V
Input Circuit Internal differential track-and-hold
Digital Down-Conversion 4-/6-channel multimode DDC
Supported Signal Modes Multimode WCDMA processing
패키지 256-CSPBGA, 17 x 17 mm
Package Pin Count 256 pins
실장 유형 Surface mount
AEC-Q100 Qualification Not applicable
Lifecycle Recommendation Not recommended for new designs

AD6654BBC 256 pins 핀 구성 가이드

AD6654BBC(256 pins 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

AD6654BBC의 256 pins 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: AD6654BBC.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

AD6654BBC 적합 용도: 6 애플리케이션s: WCDMA Base-Station Receiver, Software-Defined Radio Platform, Wideband IF Test and Measurement, Communications Channel Analyzer, RF-to-IF Digital Receiver, Multi-Channel Digital Receiver.

🌐

WCDMA Base-Station Receiver

The AD6654BBC fits WCDMA base-station receiver designs because its integrated DDC can process up to six WCDMA channels and its ADC samples at up to 92.16 MSPS. The receiver can digitize a wideband IF signal and perform channelization digitally, reducing the amount of analog channelization required before the data reaches an FPGA or DSP. The trade-off is lifecycle exposure because Analog Devices marks the device as not recommended for new designs, so availability and configuration support require confirmation before a new deployment.

📡

Software-Defined Radio Platform

AD6654BBC is suitable for software-defined radio platforms that need a high-speed IF input and programmable channelization close to the antenna front end. Its 14-bit, 92.16 MSPS conversion rate provides sufficient sampling bandwidth for multichannel wideband receiver chains, while the integrated DDC performs part of the frequency translation and filtering digitally. This integration can simplify the FPGA interface, but the receiver must be designed around the exact four- or six-channel resource layout and validated for the target signal bandwidth.

📊

Wideband IF Test and Measurement

AD6654BBC can serve as the conversion element in a wideband IF digitization instrument where several modulated channels must be captured from one analog input. The 92.16 MSPS maximum rate and IF support to 200 MHz allow direct sampling of a selected intermediate-frequency band, while the internal DDC produces lower-rate digital outputs for analysis. Instrument designers should carefully separate analog and digital power domains, control clock jitter, and verify that the selected variant exposes the required processing channels.

🖥️

Communications Channel Analyzer

The AD6654BBC supports communications channel-analysis systems that need to observe multiple WCDMA carriers without building a separate converter for each channel. A wideband analog front end can feed the 2.2 V peak-to-peak differential input, and the on-chip digital down-converters can divide the sampled stream into lower-rate channels. This reduces analog duplication but concentrates functional risk in the device lifecycle, making a documented procurement plan especially important for long-lived test systems.

📶

RF-to-IF Digital Receiver

AD6654BBC is appropriate for an RF-to-IF receiver that performs antenna filtering, mixing, and analog gain control before performing high-rate digitization. Its 14-bit resolution and 92.16 MSPS sampling rate support wideband IF capture, and the integrated DDC moves much of the channel-selection workload into the digital domain. The design must maintain differential input integrity, provide suitable reference and clocking, and account for the receiver's not-recommended-for-new-designs status during platform planning.

🔧

Multi-Channel Digital Receiver

AD6654BBC is suited to multi-channel digital receivers where one shared ADC front end can feed several independently processed WCDMA channels. The six-channel version provides the broadest channel count, while the four-channel version omits Channel 4 and Channel 5. In a multi-channel installation, designers should align RF gain and filter paths with each enabled DDC channel and verify synchronization, latency, and output interfaces. Because this is a complex mixed-signal device, register configuration and thermal design require careful review.

추천 제품 요약

AD6654BBCZ Same-family receiver candidate for configuration and lifecycle review 사용처: WCDMA Base-Station Receiver, Software-Defined Radio Platform, Wideband IF Test and Measurement, Communications Channel Analyzer, RF-to-IF Digital Receiver, Multi-Channel Digital Receiver
What is the AD6654BBC?
The AD6654BBC is a 14-bit, 92.16 MSPS wideband IF-to-baseband receiver from Analog Devices. It combines an analog-to-digital converter with four- or six-channel multimode digital down-conversion in a 256-CSPBGA package. According to the Analog Devices product page, the device is not recommended for new designs.
What are the key specifications of AD6654BBC?
The AD6654BBC provides 14-bit resolution, a maximum sampling rate of 92.16 MSPS, IF sampling to 200 MHz, a 2.4 V internal reference, and a 2.2 V peak-to-peak analog input range. It uses a pipelined ADC with an internal differential track-and-hold and is packaged in a 17 x 17 mm 256-CSPBGA. These specifications define it as a wideband communications receiver rather than a general-purpose low-speed ADC.
Is AD6654BBC suitable for WCDMA receiver applications?
Yes, AD6654BBC is suitable for WCDMA receiver signal chains because it includes a 4-/6-channel multimode digital down-converter capable of processing up to six WCDMA channels. Its 14-bit, 92.16 MSPS ADC also supports direct sampling of wideband IF signals up to 200 MHz. The exact channel configuration depends on whether the four-channel or six-channel device is used.
What is the difference between the four-channel and six-channel AD6654 versions?
The four-channel AD6654 version does not provide Channel 4 and Channel 5, while the six-channel version supports those channels. The Analog Devices datasheet identifies this channel availability as the only difference between the four-channel and six-channel devices. Engineers should therefore select the channel count according to the required receiver architecture rather than assuming identical resource availability.
Where can I download the AD6654BBC datasheet PDF?
The official AD6654BBC datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD6654.pdf. It describes the 14-bit, 92.16 MSPS, 4-/6-channel wideband IF-to-baseband receiver and its channel differences. Use the manufacturer document for pin assignments, electrical limits, register information, and application details.
Where can I find the AD6654BBC pinout and package information?
The AD6654BBC pinout is documented in the Analog Devices AD6654 datasheet, which covers the 256-CSPBGA package and its 17 x 17 mm physical characteristics. The package uses a 256-ball fine-pitch array, so board layout must follow the manufacturer land pattern rather than a generic BGA drawing. The package information and pin assignments should be treated as one design reference.
Where can I request a quote for AD6654BBC?
Use the Request a Quote form on this page to request current AD6654BBC pricing, availability, lead time, and minimum-order information. Because Analog Devices identifies the device as not recommended for new designs, purchasing review should include lifecycle status and the exact package suffix. A written quote is preferable to assuming that legacy inventory will remain available.
What is the lead time for AD6654BBC?
Request the current AD6654BBC lead time through the Request a Quote form on this page. Lead time can change for a not-recommended-for-new-designs product because supply depends on remaining factory and distribution inventory rather than a current broad-market production plan. Include the required quantity, package suffix, and target shipment date in the request for a more useful response.
Is AD6654BBC currently in stock?
Current AD6654BBC stock status should be confirmed through the Request a Quote form on this page. The manufacturer product page marks the device as not recommended for new designs, so a temporary listing indication should not be treated as a long-term supply guarantee. Procurement should request a confirmed quantity, delivery date, and traceability information before committing the component to a build.
What is the best drop-in replacement for AD6654BBC?
The closest documented same-family drop-in candidate is AD6654BBCZ, which uses the same 256-pin BGA format and is presented as functionally consistent, although some electrical characteristics differ. It should be accepted only after Analog Devices documents and the receiving system confirm pin compatibility, operating limits, and firmware or register differences. No broader set of verified drop-in alternatives was established.
Can AD6654BBCZ replace AD6654BBC?
AD6654BBCZ may be considered as a same-package drop-in candidate for AD6654BBC because it is listed as a 256-pin BGA alternative with broadly consistent functionality. It is not a perfect like-for-like substitution because some electrical characteristics differ. Verify package drawings, pin names, supply requirements, maximum operating conditions, and configuration requirements before approving it for production.
What can replace AD6654BBC?
AD6654BBCZ is the most direct documented candidate because it retains the 256-pin BGA format and closely related receiver functionality. Other products may provide similar ADC or digital-down-conversion functions but cannot be assumed to be drop-in replacements without an identical package and verified pin mapping. For a production change, compare the complete pin list, clocking, reference, interface, register set, and electrical limits.
When should I choose AD6654BBC over a generic ADC?
Choose AD6654BBC when the design needs direct sampling of a wideband IF signal together with integrated digital down-conversion and multimode WCDMA processing. A generic ADC may be appropriate when the receiver performs channelization externally, but it would require additional FPGA logic and supporting circuitry. The decision should balance integration and channel resources against lifecycle risk and configuration flexibility.
What are the trade-offs of the AD6654BBC not-recommended-for-new-designs status?
The main trade-off is that AD6654BBC offers a mature mixed-signal receiver function but is not recommended for new designs. That status can simplify work on an existing platform because the device and documentation already exist, yet it creates greater sourcing and long-term availability risk for a new production program. A new design should confirm lifecycle support, software availability, and a qualified successor before layout release.
Is AD6654BBC suitable for direct RF or IF digitization?
AD6654BBC is suitable for wideband IF digitization because its ADC supports sampling rates up to 92.16 MSPS and IF sampling frequencies up to 200 MHz. It is not a direct RF sampler for arbitrary antenna frequencies; the input still requires appropriate RF-to-IF conversion and filtering before reaching the analog input. Its integrated DDC can then reduce the digitized IF stream toward baseband.

엔지니어링 참조 데이터: AD6654BBC — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose AD6654BBC when an existing communications design specifically depends on its 14-bit, 92.16 MSPS wideband ADC, integrated 4-/6-channel DDC, and established configuration. It is particularly appropriate when the current platform already controls the device and changing the receiver would add substantial redesign and verification effort. Consider AD6654BBCZ when the same 256-pin BGA format and broadly consistent receiver functionality are needed, but first verify its electrical characteristics, channel resources, clocking, registers, and lifecycle position. Do not choose AD6654BBC for an unqualified new platform without confirming long-term supply, software availability, and the manufacturer's successor recommendation. For a new architecture that does not require integrated WCDMA channelization, a separately specified ADC and FPGA-based DDC may offer better lifecycle control even though it requires more board design effort.

대체품과의 비교

파라미터 이 제품 AD6654BBCZ
Brand Analog Devices Analog Devices
Package 256-CSPBGA (17 x 17 mm) 256-pin BGA
Resolution 14 bit 14 bit

주요 차별점

  • Integrated wideband receiver processing (vs AD6654BBCZ)
  • Direct IF sampling capability (vs AD6654BBCZ)
  • Established four- and six-channel configuration distinction (vs AD6654BBCZ)

설계 노트

Implement the 256-CSPBGA footprint directly from the Analog Devices package drawing and land-pattern guidance. Keep analog, digital, clock, reference, and supply connections within the manufacturer-recommended placement zones. Fine-pitch escape routing should be reviewed for shorts, via-in-pad restrictions, solder mask relief, and assembly capability before the PCB is released.

Treat the 2.2 V peak-to-peak differential analog input and the device clock as high-speed signals. Use symmetrical routing, short connections, continuous reference planes, and controlled return paths, and follow the datasheet input-network recommendations. Avoid adding long stubs or discontinuities that could degrade converter performance or create clock-related sampling errors.

Confirm whether the design requires four or six processing channels before assigning digital resources. The four-channel AD6654 version does not make Channel 4 or Channel 5 available. Also verify the exact suffix, electrical limits, register configuration, clock requirements, and supported software or firmware environment because lifecycle status and configuration differences can prevent a seemingly identical part from working correctly.

Separate analog, digital, clock, and supply connections according to the manufacturer reference schematic and pin requirements. Provide adequate local decoupling at each supply pin and use a power-distribution network that minimizes impedance between the device and its capacitors. Do not infer the required supply voltages or capacitor values without checking the official datasheet and board-design guidance.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer product page identifies the device as not recommended for new designs. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed in the available source text.

데이터 검증일: 2026-11-18 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

AD6654BBC datasheet AD6654BBC pinout AD6654BBC datasheet pdf AD6654BBC equivalent AD6654BBC replacement AD6654BBC price AD6654BBC stock Analog Devices AD6654BBC AD6654BBC 14 bit 92.16 MSPS AD6654BBC 256 CSPBGA AD6654BBC WCDMA receiver AD6654BBC vs AD6654BBCZ

관련 부품 & 용어

Analog Devices AD6654BBC AD6654BBCZ wideband IF-to-baseband receiver analog-to-digital converter ADC mixed-signal receiver digital down-converter DDC WCDMA 14-bit resolution 92.16 MSPS 200 MHz IF sampling 2.4 V internal reference 2.2 V peak-to-peak analog input pipelined ADC differential track-and-hold 256-CSPBGA BGA package family surface-mount package software-defined radio wideband IF digitization communications receiver RF-to-IF conversion
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기