Analog Devices

AD7472YRZ - 12-Bit 1.5 MSPS ADC | Analog Devices

Teilenummer: AD7472YRZ ✓ Aktiv
2.7 V to 5.25 V Vdss 24-lead SOIC Package
MOQ: 1 |

AD7472YRZ Übersicht

The Analog Devices AD7472YRZ is a 12-bit, single-channel, successive-approximation analog-to-digital converter with a throughput rate up to 1.5 MSPS, a 2.7 V to 5.25 V analog supply range, and a 24-lead SOIC package. It converts an analog input voltage into a 12-bit parallel digital result for data-acquisition, instrumentation, industrial-control, and embedded measurement systems.

An ADC is a data-conversion integrated circuit that samples an analog voltage and represents it as digital data. Within the analog-to-digital converter hierarchy, the AD7472 is a successive-approximation, or SAR, ADC: an internal sample-and-hold circuit captures the input, and successive comparison steps determine each output bit. A parallel-output ADC exposes the converted word directly on digital pins, reducing the need for a serial interface and simplifying connections to suitable processors, FPGAs, or data-capture logic.

The AD7472 combines 12-bit resolution with a maximum 1.5 MSPS conversion rate. Its single analog input and 2.7 V to 5.25 V operating supply support compact mixed-signal designs where conversion speed, resolution, and low power consumption are more important than input multiplexing. The Analog Devices AD7472 family is identified as a high-speed, low-power SAR ADC, while the AD7472YRZ is offered in the 24-terminal SOIC outline.

Its 0 V to 2.5 V analog input range makes the converter appropriate for sensor interfaces and control signals scaled to that interval. The parallel word-access architecture allows the twelve-bit result to be captured directly rather than serialized on a dedicated data bus. Designers must still account for acquisition time, conversion time, input settling, reference accuracy, digital timing, and analog noise when defining the overall sample rate.

Typical uses include industrial process monitoring, temperature and pressure sensor acquisition, laboratory measurement equipment, motor and power-system control, and embedded data-logging systems. A 1.5 MSPS conversion capability is useful when a design needs more frequent measurements than a slow general-purpose ADC can provide, while 12-bit resolution provides 4096 discrete codes across the selected input range.

The principal design consideration is signal integrity. Place the input and reference networks close to the device, use a low-noise reference, keep analog and digital return currents separated, and observe the datasheet timing for sample acquisition and conversion. The SOIC footprint also requires adequate copper area and careful assembly layout for stable thermal and analog performance.

This page combines the Analog Devices product specifications with practical acquisition guidance, verified drop-in references, packaging details, and application-oriented design notes. It helps engineers evaluate the AD7472YRZ against pin-compatible family members and plan the surrounding analog, digital, and layout implementation.

Drop-in-Alternativen für AD7472YRZ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

AD7472ARZ

✅ Drop-In
📦 24-lead SOIC
Same 12-bit SAR architecture and 1.5 MSPS class; suffix-level grade differences require final datasheet confirmation

📋 Referenzalternative (nicht im Katalog)

AD7472AR-REEL7

✅ Drop-In
📦 24-lead SOIC
Same 12-bit SAR performance and 24-pin terminal arrangement; ordering suffix differs by 0 percentage in stated key ratings

📋 Referenzalternative (nicht im Katalog)

AD7472YRU

✅ Drop-In
Analog Devices
📦 24-lead SOIC
Successive-approximation ADC · 12 bit · 1 channel · Single-ended analog input · 1.5 MSPS · 2.7 V to 5.25 V · 4 mW · Parallel

Preis auf Anfrage

Datenblatt ansehen →

AD7472YRU-REEL7

✅ Drop-In
📦 24-lead SOIC
Same 12-bit SAR conversion performance and 24-pin terminal arrangement; suffix-level grade and reel format must be checked

📋 Referenzalternative (nicht im Katalog)

AD7472YRZ Grenzwerte & elektrische Eigenschaften

Converter Type Successive-approximation ADC
Auflösung 12 bits
Maximum Throughput 1.5 MSPS
Number of Channels 1 channel
Analog Input Range 0 V to 2.5 V
Supply Voltage Range 2.7 V to 5.25 V
Output Interface Parallel word access
Architecture SAR
Gehäuse 24-lead SOIC
Terminal Count 24 terminals
Montageart Surface mount
Power Classification Low power
Automotive Application Supported
Output Code Count 4096 codes

AD7472YRZ 24-lead soic Pinbelegungsleitfaden

Pinbelegung für AD7472YRZ (24-lead soic-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für AD7472YRZ im 24-lead soic-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für AD7472YRZ.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

AD7472YRZ ist geeignet für 6 Anwendungs: Industrial Process Monitoring, Temperature and Pressure Sensor Acquisition, Motor and Power-System Control, Laboratory Measurement Equipment, Embedded Data Logging, Automotive Sensing Systems.

🏭

Industrial Process Monitoring

The AD7472YRZ fits single-channel process monitoring where a controller must acquire a rapidly changing analog signal with 12-bit numerical resolution. Its 1.5 MSPS maximum throughput provides temporal margin for vibration, flow, or transient process measurements, while the 0 V to 2.5 V input range accepts conditioned sensor outputs. Place the converter in the analog acquisition section, reference it from a stable low-noise source, and capture the parallel result in suitable control logic. Designers should account for input-settling time, conversion timing, and digital-bus settling rather than treating the 1.5 MSPS figure as the complete system sample rate.

🌡️

Temperature and Pressure Sensor Acquisition

The AD7472YRZ can digitize conditioned temperature or pressure sensor signals when the front end scales the transducer output into its 0 V to 2.5 V analog range. Twelve-bit resolution gives 4096 digital codes, allowing meaningful measurement resolution without a high-resolution serial ADC interface. The SAR architecture and parallel output are useful for compact embedded instrument modules, where the converted word can be read directly by a microcontroller or FPGA. To preserve accuracy, keep the sensor amplifier and filtering network close to the analog input, use a quiet reference, and separate analog ground-current paths from switching digital returns.

⚡

Motor and Power-System Control

The AD7472YRZ is appropriate for sampling scaled feedback or command signals in industrial motor-control and power-system monitoring equipment. Its maximum 1.5 MSPS throughput supports frequent observations of dynamic quantities, and the single-channel architecture simplifies designs that use separate converters for different phase or rail measurements. The 2.7 V to 5.25 V device supply can coexist with compact control electronics, but the analog front end must protect the 0 V to 2.5 V input range. Use short, shielded routing for sensitive signals, synchronize acquisition with the control update, and verify timing margins for every conversion stage.

🔬

Laboratory Measurement Equipment

The AD7472YRZ can serve as the acquisition converter in compact laboratory instruments that need deterministic 12-bit measurements and direct digital access. A maximum throughput of 1.5 MSPS is useful for repetitive waveform capture, calibration loops, and monitoring experiments, while the parallel word interface avoids adding a serial protocol to the measurement path. The analog section should provide low-noise amplification and appropriate anti-alias filtering around the 0 V to 2.5 V input. For repeatable results, use a quiet reference, maintain consistent acquisition timing, and route the 12-bit output away from sensitive analog nodes.

🧩

Embedded Data Logging

The AD7472YRZ supports embedded data loggers that periodically record one analog channel and then store the result through a microcontroller, FPGA, or memory interface. Its low-power SAR design and 12-bit parallel output make it practical for compact acquisition boards, while the 1.5 MSPS capability permits bursts of closely spaced samples. The logger should alternate signal acquisition with bus readout only after the conversion timing permits, and it should account for the additional cycle required to acquire and convert each sample. Firmware designers can use a control signal to trigger conversion and latch the 12-bit result into downstream logic.

🚗

Automotive Sensing Systems

The AD7472YRZ can support automotive sensing subsystems that require a compact 12-bit SAR converter with a 1.5 MSPS maximum rate. The listed AD7472 family is associated with automotive applications, making the converter relevant to monitoring pressure, position, or other conditioned vehicle signals. Qualification still depends on the exact orderable suffix, temperature grade, and applicable automotive requirements. Protect the input against automotive transients, maintain a clean reference, and isolate sensitive analog routing from digital and power-conversion currents. Use the manufacturer ordering guide and datasheet to confirm whether the specific suffix is suitable for the final vehicle platform.

Zusammenfassung der empfohlenen Produkte

AD7472ARZ Pin-compatible AD7472-family converter Verwendet in: Industrial Process Monitoring, Laboratory Measurement Equipment, Automotive Sensing Systems AD7472AR-REEL7 24-lead SOIC family reference Verwendet in: Industrial Process Monitoring, Motor and Power-System Control, Embedded Data Logging, Automotive Sensing Systems AD7472YRU Analog Devices Verwendet in: Temperature and Pressure Sensor Acquisition, Laboratory Measurement Equipment AD7472YRZ Analog Devices Verwendet in: Temperature and Pressure Sensor Acquisition AD7472YRU-REEL7 Same-family parallel-output converter Verwendet in: Motor and Power-System Control, Embedded Data Logging
What is the AD7472YRZ?
The AD7472YRZ is a 12-bit, single-channel successive-approximation ADC with a maximum throughput of 1.5 MSPS. According to the Analog Devices AD7472 product page, it operates from a 2.7 V to 5.25 V supply and uses a parallel word-access output. The device is packaged in a 24-lead SOIC and is intended for high-speed, low-power signal-conversion designs.
What is the resolution and sampling rate of AD7472YRZ?
The AD7472YRZ provides 12-bit resolution and converts at up to 1.5 MSPS. Twelve bits represent the analog input using 4096 digital codes, while the 1.5 MSPS rate supports rapid acquisition of changing waveforms. According to the Analog Devices product page, AD7472 is the 12-bit member of the AD7470 and AD7472 high-speed, low-power SAR ADC family.
What is the input voltage range of AD7472YRZ?
The AD7472YRZ accepts an analog input range of 0 V to 2.5 V. The listed range applies to its single analog input channel and should be observed during sensor scaling, front-end design, and overvoltage analysis. The Analog Devices product page confirms the 2.7 V to 5.25 V device supply, while the component listing identifies the 0 V to 2.5 V analog input range.
Where can I download the AD7472YRZ datasheet PDF?
Download the AD7472YRZ datasheet from the official Analog Devices AD7472 product page at https://www.analog.com/en/products/ad7472.html. The manufacturer page is the appropriate source for the electrical characteristics, timing diagrams, pin descriptions, recommended application circuit, and package drawings. Use the pin-description table and timing diagram when assigning PCB tracks and defining control logic.
Where can I find the AD7472YRZ pinout?
The AD7472YRZ uses a 24-lead SOIC, and its complete pin assignment is shown in the AD7472 manufacturer datasheet linked from the Analog Devices product page. Use the pin-description table to identify supply, ground, analog input, reference, conversion-control, and digital-output functions. Do not infer pin names from a generic SOIC drawing because the exposed analog and digital functions are specific to the AD7472.
What are the key specifications of AD7472YRZ that engineers should know?
The principal AD7472YRZ specifications are 12-bit resolution, a maximum conversion throughput of 1.5 MSPS, one analog input channel, a 0 V to 2.5 V input range, and a 2.7 V to 5.25 V supply range. The Analog Devices product page identifies the device as a low-power, successive-approximation ADC with parallel output in a 24-lead SOIC package.
AD7472YRZ vs AD7472ARZ - which is better for a new PCB?
The AD7472YRZ and AD7472ARZ are identified by cross-reference information as functionally equivalent AD7472-family devices with consistent performance and terminal assignments. The choice should be based on the exact package drawing, temperature grade, lifecycle status, and availability shown for the ordered suffix. For a new layout, compare every pin and mechanical dimension against the manufacturer drawing before selecting the grade.
What is the difference between AD7472YRZ and AD7472YRU?
The AD7472YRZ and AD7472YRU are both listed in the same 24-pin, 12-bit, 1.5 MSPS SAR ADC family, and cross-reference information describes them as complete replacements with consistent performance and terminals. Their orderable suffix codes may encode packaging or grade differences, so verify the package dimensions and temperature requirements for the exact assembly rather than relying on the base device name alone.
When should I choose AD7472YRZ over AD7472AR-REEL7?
Choose AD7472YRZ when the 24-lead SOIC layout and the ordered AD7472YRZ grade match the required PCB, temperature range, and production plan. Choose AD7472AR-REEL7 only after confirming that its pinout, electrical limits, package outline, and environmental requirements are acceptable. The cross-reference listing describes complete replacement compatibility, but the manufacturer drawings remain the controlling documents.
Is AD7472YRZ suitable for industrial sensor acquisition?
The AD7472YRZ is suitable for many single-channel industrial sensor-acquisition circuits because it combines 12-bit resolution, up to 1.5 MSPS throughput, and a 0 V to 2.5 V input range. The sensor signal must be conditioned into that range, and the reference and converter timing must satisfy the required accuracy. Analog Devices lists automotive uses for this family.
What is the best drop-in replacement for AD7472YRZ?
AD7472ARZ is a documented direct replacement candidate for the AD7472YRZ because cross-reference information describes consistent performance, terminals, and package characteristics. AD7472AR-REEL7, AD7472YRU, and AD7472YRU-REEL7 are additional family references identified for direct replacement. Confirm the exact package drawing, temperature range, lifecycle status, and electrical limits before production use.
Can AD7472AR-REEL7 replace AD7472YRZ without PCB changes?
AD7472AR-REEL7 can serve as a direct replacement candidate without PCB changes when its 24-pin SOIC footprint and pin assignments match the installed AD7472YRZ. The cross-reference information describes equivalent functionality and terminals, but engineers should still check voltage limits, operating-temperature grade, acquisition timing, and reference requirements against the manufacturer datasheets.
Where to buy AD7472YRZ online?
Use the Request a Quote form on this AD7472YRZ page to request current pricing, stock confirmation, minimum order quantity, and lead time. The form connects the request with XAIPART without relying on a static price that may change. For technical qualification, use the official Analog Devices product page and datasheet linked in the datasheet field of this listing.
What is the price of AD7472YRZ?
Current AD7472YRZ pricing should be requested through the Request a Quote form on this page because quotations and availability can change with quantity and market conditions. The form supports unit-price, volume-price, and lead-time review for the exact AD7472YRZ order code. Confirm the requested quantity and delivery destination when submitting the inquiry.
What is the lead time and stock status for AD7472YRZ?
Request the current AD7472YRZ stock position, minimum order quantity, and production lead time with the Request a Quote form on this page. Give the required quantity, reel or tube packaging preference, and target delivery date so XAIPART can confirm the appropriate production route. Stock confirmation is transaction-specific and should be based on the quote response.

Technische Referenzdaten für AD7472YRZ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the AD7472YRZ when the design requires a 12-bit, single-channel SAR ADC with a maximum 1.5 MSPS rate, a 0 V to 2.5 V analog input, and a 24-lead SOIC footprint. AD7472ARZ is a direct replacement candidate when its exact grade and ordering information better fit the production plan. AD7472AR-REEL7 can be considered for the same 24-pin SOIC footprint when its reel ordering code and suffix-level specifications meet the requirements. AD7472YRU and AD7472YRU-REEL7 are additional family references for applications seeking equivalent 12-bit, 1.5 MSPS conversion behavior. Before selecting any suffix, verify the manufacturer package drawing, complete pin list, temperature range, reference requirements, and lifecycle status. This part is best suited to single-channel acquisition where parallel data capture is simpler than adding a serial interface.

Vergleich mit Alternativen

Parameter Dieses Produkt AD7472ARZ AD7472AR-REEL7 AD7472YRU AD7472YRU-REEL7
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 24-lead SOIC 24-lead SOIC 24-lead SOIC 24-lead SOIC 24-lead SOIC
Resolution 12 bits 12 bits 12 bits 12 bits 12 bits
Converter Architecture Successive approximation Successive approximation Successive approximation Successive approximation Successive approximation
Maximum Throughput 1.5 MSPS 1.5 MSPS 1.5 MSPS 1.5 MSPS 1.5 MSPS
Number of Channels 1 channel 1 channel 1 channel 1 channel 1 channel
Output Interface Parallel word access Parallel word access Parallel word access Parallel word access Parallel word access
Special Features Low-power single-channel SAR ADC Low-power single-channel SAR ADC Low-power single-channel SAR ADC Low-power single-channel SAR ADC Low-power single-channel SAR ADC

Wichtigste Unterscheidungsmerkmale

  • Direct 12-bit parallel-output conversion (vs. AD7472ARZ)
  • Single-channel 1.5 MSPS throughput (vs. AD7472AR-REEL7)
  • Parallel word access for compact embedded systems (vs. AD7472YRU)

Designhinweise

Route the analog input directly to the converter with a short trace and place any input filter or protection network close to the device. The 0 V to 2.5 V input range and 12-bit resolution require careful settling because the SAR architecture samples the input before completing successive comparison steps. Use the manufacturer timing diagram to establish acquisition time and leave margin for source impedance and the required sample rate.

Separate analog input, reference, and digital return paths to reduce coupling from the 12-bit output bus and surrounding switching circuitry. Place reference-decoupling components beside the relevant pins, maintain a continuous ground reference under the SOIC, and keep high-current output returns away from the input node. Review the Analog Devices recommended layout and application circuit before releasing the PCB artwork.

Do not assume that the 1.5 MSPS conversion rate permits uninterrupted back-to-back sampling without accounting for acquisition time, conversion time, and output latching. Confirm the control-signal polarity and timing from the manufacturer pin and timing tables. Also verify that every alternative suffix uses the same 24-lead SOIC geometry before treating it as a PCB-level replacement.

Provide local decoupling close to the supply and reference pins and select passive components with suitable DC-bias characteristics. The converter supports a 2.7 V to 5.25 V supply range, but the analog input remains limited to 0 V to 2.5 V. Check signal states during reset and power sequencing so that no external node forces the input or reference beyond its permitted operating condition.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The listed component information does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm the suffix-specific compliance documents with Analog Devices before qualification.

Daten verifiziert am: 2026-11-18 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

AD7472YRZ datasheet AD7472YRZ datasheet pdf AD7472YRZ pinout AD7472YRZ equivalent AD7472YRZ replacement AD7472YRZ cross reference AD7472YRZ price AD7472YRZ stock Analog Devices AD7472YRZ AD7472YRZ 24-SOIC footprint AD7472YRZ 12-bit 1.5 MSPS ADC AD7472YRZ sensor acquisition AD7472YRZ vs AD7472ARZ AD7472YRZ application circuit

Verwandte Bauteile & Begriffe

Analog Devices AD7472YRZ AD7472ARZ AD7472AR-REEL7 AD7472YRU AD7472YRU-REEL7 AD7470 AD7472 ADC analog-to-digital converter successive-approximation ADC SAR ADC data-conversion integrated circuit parallel word access 12-bit resolution 1.5 MSPS throughput 0 V to 2.5 V analog input 2.7 V to 5.25 V supply SOIC-24 surface mount industrial process monitoring sensor acquisition power supply rejection sample-and-hold circuit
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen