AD7472YRZ - 12-Bit 1.5 MSPS ADC | Analog Devices
MPN: AD7472YRZ ✓ NakahandaAD7472YRZ Ulas
An ADC is a data-conversion integrated circuit that samples an analog voltage and represents it as digital data. Within the analog-to-digital converter hierarchy, the AD7472 is a successive-approximation, or SAR, ADC: an internal sample-and-hold circuit captures the input, and successive comparison steps determine each output bit. A parallel-output ADC exposes the converted word directly on digital pins, reducing the need for a serial interface and simplifying connections to suitable processors, FPGAs, or data-capture logic.
The AD7472 combines 12-bit resolution with a maximum 1.5 MSPS conversion rate. Its single analog input and 2.7 V to 5.25 V operating supply support compact mixed-signal designs where conversion speed, resolution, and low power consumption are more important than input multiplexing. The Analog Devices AD7472 family is identified as a high-speed, low-power SAR ADC, while the AD7472YRZ is offered in the 24-terminal SOIC outline.
Its 0 V to 2.5 V analog input range makes the converter appropriate for sensor interfaces and control signals scaled to that interval. The parallel word-access architecture allows the twelve-bit result to be captured directly rather than serialized on a dedicated data bus. Designers must still account for acquisition time, conversion time, input settling, reference accuracy, digital timing, and analog noise when defining the overall sample rate.
Typical uses include industrial process monitoring, temperature and pressure sensor acquisition, laboratory measurement equipment, motor and power-system control, and embedded data-logging systems. A 1.5 MSPS conversion capability is useful when a design needs more frequent measurements than a slow general-purpose ADC can provide, while 12-bit resolution provides 4096 discrete codes across the selected input range.
The principal design consideration is signal integrity. Place the input and reference networks close to the device, use a low-noise reference, keep analog and digital return currents separated, and observe the datasheet timing for sample acquisition and conversion. The SOIC footprint also requires adequate copper area and careful assembly layout for stable thermal and analog performance.
This page combines the Analog Devices product specifications with practical acquisition guidance, verified drop-in references, packaging details, and application-oriented design notes. It helps engineers evaluate the AD7472YRZ against pin-compatible family members and plan the surrounding analog, digital, and layout implementation.
Mga alternatibo na pwedeng ilagay na AD7472YRZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
AD7472ARZ
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AD7472AR-REEL7
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AD7472YRU
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →AD7472YRU-REEL7
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AD7472YRZ Mga Pinakamataas na Rating at Electrical Characteristics
| Converter Type | Successive-approximation ADC |
| Pangangasiwaan | 12 bits |
| Maximum Throughput | 1.5 MSPS |
| Number of Channels | 1 channel |
| Analog Input Range | 0 V to 2.5 V |
| Supply Voltage Range | 2.7 V to 5.25 V |
| Output Interface | Parallel word access |
| Architecture | SAR |
| Packhaging | 24-lead SOIC |
| Terminal Count | 24 terminals |
| Uri ng Pagpapasok | Surface mount |
| Power Classification | Low power |
| Automotive Application | Supported |
| Output Code Count | 4096 codes |
Gabay sa Pin Configuration ng AD7472YRZ 24-lead soic
Pin configuration para sa AD7472YRZ (24-lead soic package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa AD7472YRZ.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AD7472YRZ ay nararapat para sa 6 aplikasyons: Industrial Process Monitoring, Temperature and Pressure Sensor Acquisition, Motor and Power-System Control, Laboratory Measurement Equipment, Embedded Data Logging, Automotive Sensing Systems.
Industrial Process Monitoring
The AD7472YRZ fits single-channel process monitoring where a controller must acquire a rapidly changing analog signal with 12-bit numerical resolution. Its 1.5 MSPS maximum throughput provides temporal margin for vibration, flow, or transient process measurements, while the 0 V to 2.5 V input range accepts conditioned sensor outputs. Place the converter in the analog acquisition section, reference it from a stable low-noise source, and capture the parallel result in suitable control logic. Designers should account for input-settling time, conversion timing, and digital-bus settling rather than treating the 1.5 MSPS figure as the complete system sample rate.
Inirekomenda
Temperature and Pressure Sensor Acquisition
The AD7472YRZ can digitize conditioned temperature or pressure sensor signals when the front end scales the transducer output into its 0 V to 2.5 V analog range. Twelve-bit resolution gives 4096 digital codes, allowing meaningful measurement resolution without a high-resolution serial ADC interface. The SAR architecture and parallel output are useful for compact embedded instrument modules, where the converted word can be read directly by a microcontroller or FPGA. To preserve accuracy, keep the sensor amplifier and filtering network close to the analog input, use a quiet reference, and separate analog ground-current paths from switching digital returns.
Inirekomenda
Motor and Power-System Control
The AD7472YRZ is appropriate for sampling scaled feedback or command signals in industrial motor-control and power-system monitoring equipment. Its maximum 1.5 MSPS throughput supports frequent observations of dynamic quantities, and the single-channel architecture simplifies designs that use separate converters for different phase or rail measurements. The 2.7 V to 5.25 V device supply can coexist with compact control electronics, but the analog front end must protect the 0 V to 2.5 V input range. Use short, shielded routing for sensitive signals, synchronize acquisition with the control update, and verify timing margins for every conversion stage.
Inirekomenda
Laboratory Measurement Equipment
The AD7472YRZ can serve as the acquisition converter in compact laboratory instruments that need deterministic 12-bit measurements and direct digital access. A maximum throughput of 1.5 MSPS is useful for repetitive waveform capture, calibration loops, and monitoring experiments, while the parallel word interface avoids adding a serial protocol to the measurement path. The analog section should provide low-noise amplification and appropriate anti-alias filtering around the 0 V to 2.5 V input. For repeatable results, use a quiet reference, maintain consistent acquisition timing, and route the 12-bit output away from sensitive analog nodes.
Inirekomenda
Embedded Data Logging
The AD7472YRZ supports embedded data loggers that periodically record one analog channel and then store the result through a microcontroller, FPGA, or memory interface. Its low-power SAR design and 12-bit parallel output make it practical for compact acquisition boards, while the 1.5 MSPS capability permits bursts of closely spaced samples. The logger should alternate signal acquisition with bus readout only after the conversion timing permits, and it should account for the additional cycle required to acquire and convert each sample. Firmware designers can use a control signal to trigger conversion and latch the 12-bit result into downstream logic.
Inirekomenda
Automotive Sensing Systems
The AD7472YRZ can support automotive sensing subsystems that require a compact 12-bit SAR converter with a 1.5 MSPS maximum rate. The listed AD7472 family is associated with automotive applications, making the converter relevant to monitoring pressure, position, or other conditioned vehicle signals. Qualification still depends on the exact orderable suffix, temperature grade, and applicable automotive requirements. Protect the input against automotive transients, maintain a clean reference, and isolate sensitive analog routing from digital and power-conversion currents. Use the manufacturer ordering guide and datasheet to confirm whether the specific suffix is suitable for the final vehicle platform.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for AD7472YRZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | AD7472ARZ | AD7472AR-REEL7 | AD7472YRU | AD7472YRU-REEL7 |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-lead SOIC | 24-lead SOIC | 24-lead SOIC | 24-lead SOIC | 24-lead SOIC |
| Resolution | 12 bits | 12 bits | 12 bits | 12 bits | 12 bits |
| Converter Architecture | Successive approximation | Successive approximation | Successive approximation | Successive approximation | Successive approximation |
| Maximum Throughput | 1.5 MSPS | 1.5 MSPS | 1.5 MSPS | 1.5 MSPS | 1.5 MSPS |
| Number of Channels | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel |
| Output Interface | Parallel word access | Parallel word access | Parallel word access | Parallel word access | Parallel word access |
| Special Features | Low-power single-channel SAR ADC | Low-power single-channel SAR ADC | Low-power single-channel SAR ADC | Low-power single-channel SAR ADC | Low-power single-channel SAR ADC |
Pangunahing mga Pagkakaiba
- Direct 12-bit parallel-output conversion (kumpara saAD7472ARZ)
- Single-channel 1.5 MSPS throughput (kumpara saAD7472AR-REEL7)
- Parallel word access for compact embedded systems (kumpara saAD7472YRU)
Talaan ng Disenyo
Route the analog input directly to the converter with a short trace and place any input filter or protection network close to the device. The 0 V to 2.5 V input range and 12-bit resolution require careful settling because the SAR architecture samples the input before completing successive comparison steps. Use the manufacturer timing diagram to establish acquisition time and leave margin for source impedance and the required sample rate.
Separate analog input, reference, and digital return paths to reduce coupling from the 12-bit output bus and surrounding switching circuitry. Place reference-decoupling components beside the relevant pins, maintain a continuous ground reference under the SOIC, and keep high-current output returns away from the input node. Review the Analog Devices recommended layout and application circuit before releasing the PCB artwork.
Do not assume that the 1.5 MSPS conversion rate permits uninterrupted back-to-back sampling without accounting for acquisition time, conversion time, and output latching. Confirm the control-signal polarity and timing from the manufacturer pin and timing tables. Also verify that every alternative suffix uses the same 24-lead SOIC geometry before treating it as a PCB-level replacement.
Provide local decoupling close to the supply and reference pins and select passive components with suitable DC-bias characteristics. The converter supports a 2.7 V to 5.25 V supply range, but the analog input remains limited to 0 V to 2.5 V. Check signal states during reset and power sequencing so that no external node forces the input or reference beyond its permitted operating condition.
Impormasyon ng Pagsunod sa Kautusan
The listed component information does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm the suffix-specific compliance documents with Analog Devices before qualification.