Analog Devices

AD8018ARZ - Dual 5V High-Speed xDSL Amplifier | ADI

Teilenummer: AD8018ARZ ✓ Aktiv
5 V Vdss 8-pin SOIC Package
MOQ: 1 |

AD8018ARZ Übersicht

The Analog Devices AD8018ARZ is a dual, high-speed, low-cost xDSL line-drive amplifier operating from a single 5 V supply and packaged in an 8-pin SOIC. It provides two amplifier channels, a 300 V/µs slew rate, 54 dB CMRR, and an operating temperature range of -40°C to +85°C. The device is intended for USB, PCMCIA, and PCI-based customer premises equipment requiring low-distortion signal transmission.

An xDSL line-driver amplifier is a specialized operational-amplifier stage used at the transmitter side of a digital subscriber-line system. It combines high bandwidth and fast slew rate with the ability to drive signals close to the supply rail. In the broader electronics hierarchy, the AD8018 is an operational amplifier, a high-speed amplifier, an analog IC, and ultimately a semiconductor for line-interface signal conditioning.

The AD8018ARZ combines a 5 V single-supply architecture with low-distortion output capability. Its 300 V/µs slew rate supports rapid transitions in modulated xDSL signals, while the 54 dB common-mode rejection ratio reduces sensitivity to unwanted differential-mode interference. The dual-channel configuration permits two driver functions in one package, helping reduce board area in customer-premises equipment with parallel signal paths.

The AD8018 uses a current-feedback operational-amplifier architecture suited to high-speed, low-distortion line-driving tasks. The manufacturer describes the output stage as capable of driving low-distortion signals to within 0.5 V of the supply rail, making output swing and load capability important design considerations. Because it is intended for a 5 V single supply, input and output common-mode ranges must be checked against the actual line-driver circuit rather than assumed from general-purpose op-amp behavior.

Typical applications include ADSL line interfaces, PCMCIA and PCI-based customer-premises equipment, USB-related line drivers, and other high-speed communications paths. The dual amplifier is particularly useful where two related transmit channels must be placed close together and operate from the same supply. Termination, output-current, and signal-integrity requirements remain application-specific and should be validated against the relevant xDSL line interface and transmission standard.

PCB design should minimize trace length between the amplifier and the line-driver network, maintain a continuous ground return, and decouple the 5 V supply locally. High-speed output edges make short return paths and careful control of parasitic inductance important. The output network, line impedance, and cable length can materially affect distortion and reach, so simulation with the actual transformer, transformerless network, and termination is recommended.

This page combines the manufacturer product information with package details, practical circuit-placement guidance, qualified same-package alternatives, and a parameter comparison for engineers evaluating the AD8018ARZ in 5 V xDSL line-drive designs.

Drop-in-Alternativen für AD8018ARZ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit AD8018ARZ (gleiche Bauform und Footprint) – abweichend in Product Type, Package, Amplifier Type, Primary Application, Slew Rate.

Analog Devices
Product Type: Single-supply differential-output transimpedance amplifier
Primary Application: Fiber-optic receiver
Vergleichen mit AD8018ARZ →
Texas Instruments
Product Type: Wideband voltage-feedback operational amplifier with shutdown
Package: 8-SOIC (SOIC-8)
Vergleichen mit AD8018ARZ →
Texas Instruments
Product Type: Single current-feedback amplifier
Amplifier Type: Current-feedback operational amplifier
Slew Rate: 10,500 V/µs
Vergleichen mit AD8018ARZ →

AD8014ARZ

✅ Drop-In
Analog Devices
📦 8-pin SOIC
Current-feedback operational amplifier · 1 circuit · 400 MHz · 1.3 mA · 5 V to 12 V · ±2.5 V to ±6 V · 8-pin SOIC · Surface mount

Preis auf Anfrage

Datenblatt ansehen →

THS3201D

✅ Drop-In
Texas Instruments
📦 8-pin SOIC
Current-feedback operational amplifier · 1 circuit · 1.8 GHz · 10,500 V/µs · ±3.3 V · ±7.5 V · ±3.3 V to ±7.5 V · 8-pin SOIC

Preis auf Anfrage

Datenblatt ansehen →

MAX4107

✅ Drop-In
📦 8-pin SOIC
Same 8-pin SOIC package class for a high-speed line-drive function; the AD8018ARZ has a documented 300 V/µs slew rate, while the MAX4107 rating differs by an amount requiring confirmation from its datasheet.

📋 Referenzalternative (nicht im Katalog)

LMH6702

✅ Drop-In
📦 8-pin SOIC
Same 8-pin SOIC package class and high-speed amplifier positioning; the principal differences are device-specific bandwidth, noise, distortion, and output-current characteristics that require circuit-level verification.

📋 Referenzalternative (nicht im Katalog)

AD8018ARZ Grenzwerte & elektrische Eigenschaften

Amplifier Type Dual high-speed current-feedback operational amplifier
Number of Channels 2 channels
Versorgungsspannung 5 V
Slew Rate 300 V/µs
Common-Mode Rejection Ratio 54 dB
Betriebstemperatur -40°C to +85°C
Gehäuse 8-pin SOIC
Anzahl der Pins 8 pins
Montageart Surface mount
Output Swing Limit Within 0.5 V of the supply rail
Signal Type xDSL line-drive signals
Primary Application xDSL customer-premises equipment
Nominal Supply Configuration Single supply

AD8018ARZ Pin-Konfiguration

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 OUTA — Amplifier A output
Pin 2 INA− — Inverting input for amplifier A
Pin 3 INA+ — Noninverting input for amplifier A
Pin 4 V− — Negative supply connection
Pin 5 INB+ — Noninverting input for amplifier B
Pin 6 INB− — Inverting input for amplifier B
Pin 7 OUTB — Amplifier B output
Pin 8 V+ — Positive supply connection

Typische Anwendungen

AD8018ARZ ist geeignet für 6 Anwendungs: ADSL Line-Driver Interface, USB-Based CPE Line Interface, PCMCIA Modem Interface, PCI-Based Customer Premises Equipment, Dual-Channel High-Speed Signal Conditioning, Low-Cost CPE Transmitter Card.

🌐

ADSL Line-Driver Interface

The AD8018ARZ fits an ADSL transmitter because it combines two high-speed amplifier channels with a 300 V/µs slew rate in an 8-pin SOIC. It is intended for single-supply xDSL systems and can drive low-distortion signals to within 0.5 V of the 5 V rail. Place the amplifier close to the transformer or line-network termination to minimize trace-area effects. Validate distortion and output swing with the actual winding ratio, load, and line length because those external factors determine the final eye and spectral performance.

🖥️

USB-Based CPE Line Interface

The AD8018ARZ is suitable for USB-based customer-premises equipment where a compact dual-channel transmitter must operate from 5 V. Its two channels can support parallel line-drive functions without using two separate packages, while the 300 V/µs slew rate provides the speed required for fast digital transitions. The PCB layout should keep the output path short and provide a low-impedance ground return. Confirm that the selected USB line-driver topology stays inside the amplifier's input and output operating ranges.

📱

PCMCIA Modem Interface

The AD8018ARZ was designed with PCMCIA-based customer-premises equipment in mind, making it appropriate for dual xDSL transmit stages in compact modem hardware. Its 8-pin SOIC package limits board area, and the dual topology allows matched channel placement. Because PCMCIA and related modem assemblies often operate close to digital switching circuitry, use local supply bypassing and a continuous ground plane. Simulate the complete line network to verify distortion rather than relying only on the amplifier's 54 dB CMRR figure.

🖥️

PCI-Based Customer Premises Equipment

The AD8018ARZ supports PCI-based customer-premises equipment by providing two high-speed line-drive amplifiers for a 5 V transmitter section. Its low-cost dual SOIC implementation is appropriate where board area and component count matter, and its high slew rate helps reproduce rapid line transitions. Route outputs directly toward the isolation or termination network, avoiding long stubs through the PCB. Check the output-voltage margin and distortion against the exact external network before production release.

⚡

Dual-Channel High-Speed Signal Conditioning

The AD8018ARZ can condition two related high-speed signals when the system uses a 5 V single supply and needs compact dual-channel circuitry. Its 300 V/µs slew rate makes it appropriate for edges substantially faster than those handled by many general-purpose operational amplifiers. Match both channels carefully and provide symmetrical routing where timing alignment matters. Use the pinout table in the manufacturer datasheet for assignments, and verify stability with the actual capacitive and resistive loads connected to each output.

🏭

Low-Cost CPE Transmitter Card

The AD8018ARZ is appropriate for a low-cost customer-premises transmitter card that combines a 5 V rail with high-speed xDSL signaling. The dual-channel 8-pin SOIC reduces placement requirements, and the documented low-distortion operation supports line-reach optimization. Place local decoupling at the supply pins and keep the output network free of unnecessary copper. The final design should be tested across temperature because output swing, load behavior, and distortion can change from the nominal -40°C to +85°C operating range.

Zusammenfassung der empfohlenen Produkte

AD8018ARZ Analog Devices Verwendet in: ADSL Line-Driver Interface, USB-Based CPE Line Interface, PCMCIA Modem Interface, PCI-Based Customer Premises Equipment, Dual-Channel High-Speed Signal Conditioning, Low-Cost CPE Transmitter Card AD8014ARZ Analog Devices Verwendet in: ADSL Line-Driver Interface, Dual-Channel High-Speed Signal Conditioning THS3201 High-speed amplifier evaluation candidate Verwendet in: USB-Based CPE Line Interface, Low-Cost CPE Transmitter Card MAX4107 High-speed line-drive evaluation candidate Verwendet in: PCMCIA Modem Interface LMH6702 High-speed amplifier evaluation candidate Verwendet in: PCI-Based Customer Premises Equipment
What is the AD8018ARZ and what is its primary application?
The AD8018ARZ is a dual, high-speed operational amplifier optimized for driving xDSL signals from a single 5 V supply. According to the Analog Devices AD8018 product information, it is intended for USB, PCMCIA, and PCI-based customer-premises equipment where low distortion and maximum line reach are important. Its two channels share one 8-pin SOIC package, making it suitable for compact dual-channel transmit circuitry.
What are the key specifications of AD8018ARZ that engineers should know?
The AD8018ARZ provides two amplifier channels, a 5 V supply, a 300 V/µs slew rate, 54 dB CMRR, and an operating range of -40°C to +85°C. The Analog Devices product description also identifies low-distortion output capability to within 0.5 V of the supply rail. These figures position the device as a high-speed line-drive amplifier rather than a general-purpose precision op-amp.
Where can I download the AD8018ARZ datasheet PDF?
The official AD8018ARZ technical resource is the Analog Devices AD8018 product page at https://www.analog.com/en/products/ad8018.html. From that page, the manufacturer data sheet and product documents provide the authoritative pin assignments, electrical characteristics, ordering information, and application details. Use the manufacturer document for design sign-off rather than relying on a distributor summary or a secondary datasheet mirror.
Where can I find the AD8018ARZ pinout?
The AD8018ARZ uses a standard 8-pin SOIC footprint with two complete amplifier channels. Its functional connections are OUTA on pin 1, INA− on pin 2, INA+ on pin 3, V− on pin 4, INB+ on pin 5, INB− on pin 6, OUTB on pin 7, and V+ on pin 8. Assign PCB tracks using the pin-description table in the Analog Devices manufacturer datasheet.
What is the slew rate of AD8018ARZ?
The AD8018ARZ has a slew rate of 300 V/µs. According to the listed AD8018 datasheet specifications, this high slew rate supports the rapid signal transitions required by high-speed xDSL line-driving circuits. Slew rate should be compared with the intended line rate and output-network bandwidth, because distortion can also be influenced by gain, load, output swing, and the external termination network.
Can AD8018ARZ operate from a single 5 V supply?
Yes. The AD8018ARZ is specified for a single 5 V supply and is designed to produce low-distortion output signals close to the positive rail. The manufacturer identifies this single-supply operation as important for low-cost xDSL systems. Designers must still verify that the input common-mode voltage and output swing remain inside the operating limits for the selected circuit topology.
Is AD8018ARZ suitable for ADSL customer-premises equipment?
Yes. The AD8018ARZ is specifically identified by Analog Devices as an xDSL line-drive amplifier for USB, PCMCIA, and PCI-based customer-premises equipment. Its dual-channel architecture supports two transmit-related functions in one 8-pin SOIC, while its 300 V/µs slew rate helps accommodate fast line transitions. Final compliance must be confirmed against the applicable modem, transformer, and line-interface design.
What is the difference between AD8018ARZ and AD8014ARZ?
The AD8014ARZ and AD8018ARZ are both high-speed current-feedback amplifiers offered in an 8-lead SOIC, and an ADI comparison identifies the AD8014 as a functional replacement candidate. Their bandwidth class and supply-voltage range are similar, but exact gain-bandwidth, distortion, and output-drive limits must be checked for the selected operating point. The AD8018 is specifically oriented toward single-supply xDSL line driving.
What is the best drop-in replacement for AD8018ARZ?
The AD8014ARZ is the closest same-manufacturer 8-pin SOIC candidate identified in the available cross-reference material. Cross-brand candidates include the THS3201, MAX4107, and LMH6702, but each requires verification of its exact SOIC pinout, supply range, stability, and output-drive capability before substitution. Confirm the candidate against the manufacturer pin-description table and the original circuit's gain, load, and termination.
Can THS3201 replace AD8018ARZ in an xDSL line-driver circuit?
The THS3201 is identified as an equivalent high-speed amplifier candidate for the AD8018ARZ, but substitution is conditional rather than automatic. Verify that the selected THS3201 SOIC option uses the same eight-pin connection pattern and can operate from the intended 5 V rail. Also compare gain-bandwidth, output swing, output current, stability, and distortion against the original xDSL driver operating conditions.
When should I choose AD8018ARZ instead of THS3201 or MAX4107?
Choose the AD8018ARZ when the design specifically benefits from its documented single-supply xDSL orientation, dual-channel 8-pin SOIC implementation, and output capability approaching the supply rail. Choose a THS3201 or MAX4107 only after confirming that its exact package pinout and electrical limits satisfy the circuit. For sensitive line rates, compare measured distortion and output swing rather than bandwidth alone.
Where can I buy AD8018ARZ and check its current availability?
Use the Request a Quote form on this page to request the current AD8018ARZ unit availability, quantity breaks, and order lead time. The form routes the request through XAIPART without relying on a stale catalog figure. For engineering qualification, confirm the exact AD8018ARZ ordering suffix and the 8-pin SOIC package before releasing a purchase order.
What is the price of AD8018ARZ?
The current AD8018ARZ price is best obtained through the Request a Quote form on this page because commercial pricing and availability can change with order quantity and market conditions. Submit the required quantity, packaging preference, and target delivery date with the request. Do not use an old catalog value when preparing a production budget or cost comparison.
What is the lead time for AD8018ARZ?
The current AD8018ARZ lead time should be requested through the Request a Quote form on this page. Include the order quantity, reel or tube preference, and required delivery date so the procurement response reflects the actual channel and schedule. For production planning, distinguish the manufacturer lead time from any inspection, assembly, or customer-specific qualification time.
Is AD8018ARZ in stock?
Current AD8018ARZ stock status should be confirmed through the Request a Quote form on this page. Because availability can change after a quote is generated, request the required quantity and packaging details rather than relying on an old listing. If continuity is critical, ask for the current manufacturer lifecycle status and any scheduled supply constraints in the same request.

Technische Referenzdaten für AD8018ARZ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the AD8018ARZ when the design is a 5 V xDSL transmitter requiring two high-speed channels in one 8-pin SOIC. Its explicit xDSL positioning, 300 V/µs slew rate, and output operation close to the supply rail make it a strong candidate for ADSL, PCMCIA, PCI-based, and USB-based customer-premises equipment. AD8014ARZ is the logical first same-manufacturer alternative when its detailed gain, distortion, and output-drive characteristics meet the target circuit. Evaluate THS3201 when a single-channel solution is acceptable and its manufacturer data confirms the required 5 V operation and output behavior. MAX4107 is suitable for consideration when its exact SOIC pinout and line-drive performance match the original design. LMH6702 offers another single-channel high-speed option, but it offers less board-area reduction than the dual AD8018ARZ. Before substituting any candidate, verify pin assignments, supply range, common-mode limits, stability, output swing, and distortion using the actual termination and load.

Vergleich mit Alternativen

Parameter Dieses Produkt AD8014ARZ THS3201 MAX4107 LMH6702
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Analog Devices Analog Devices Texas Instruments Maxim Integrated Texas Instruments
Amplifier Channels 2 channels 2 channels 1 channel 1 channel 1 channel
Nominal Supply Voltage 5 V Similar supply-voltage range 5 V-class high-speed amplifier 5 V-class high-speed amplifier 5 V-class high-speed amplifier
Primary Application xDSL line driving High-speed signal amplification High-speed signal amplification High-speed line-drive amplification High-speed signal amplification
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount

Wichtigste Unterscheidungsmerkmale

  • Two integrated line-drive amplifier channels in one package (vs. THS3201)
  • Purpose-defined single-supply xDSL positioning (vs. MAX4107)
  • High slew rate for fast line transitions (vs. AD8014ARZ)
  • Dual-channel integration reduces PCB footprint (vs. LMH6702)

Designhinweise

Place the AD8018ARZ close to the transformer or line-network termination so that each output follows a short, direct path. Avoid long traces and test pads in the high-speed output path, because parasitic inductance and capacitance can degrade edge quality and contribute to distortion. Keep the amplifier ground return continuous and connect it directly to the quiet signal-ground region near the device.

Decouple the 5 V supply locally with the capacitance values and placement guidance specified in the Analog Devices manufacturer datasheet. Place the smallest effective bypass capacitor close to the supply pins and use a larger bulk capacitor near the transmitter supply entry point. Maintain short ground paths for the bypass network so switching current from other sections of the CPE does not modulate the line-driver output.

Evaluate output swing with the actual termination, transformer, cable, and line impedance rather than an unloaded bench condition. The AD8018ARZ can drive low-distortion signals to within 0.5 V of the supply rail, leaving limited headroom for amplitude and load-related loss. Simulate the complete transmit path and verify distortion, overshoot, and stability at the intended xDSL line rate before production release.

Do not treat a functional-equivalent amplifier as an automatic drop-in replacement. Confirm the exact SOIC pinout, supply limits, input common-mode range, gain-bandwidth, output-current capability, and stability with the connected load. The AD8018 is dual-channel, whereas some listed alternatives are single-channel devices, so a substitution may require an additional amplifier and PCB changes despite sharing the 8-pin package class.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The available product listings identify the part as active and show RoHS-related catalog information, but they do not provide an authoritative compliance statement for every required category. Verify current environmental and quality compliance with the manufacturer before production release.

Daten verifiziert am: 2026-11-18 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

AD8018ARZ datasheet AD8018ARZ datasheet pdf AD8018ARZ pinout AD8018ARZ equivalent AD8018ARZ replacement AD8018ARZ cross reference AD8018ARZ vs AD8014ARZ AD8018ARZ vs THS3201 AD8018ARZ 8 pin SOIC AD8018ARZ 300 V/us slew rate AD8018ARZ xDSL line driver AD8018ARZ price AD8018ARZ stock Analog Devices AD8018ARZ

Verwandte Bauteile & Begriffe

Analog Devices AD8018ARZ AD8014ARZ THS3201 MAX4107 LMH6702 xDSL line-drive amplifier operational amplifier current-feedback amplifier high-speed amplifier special-purpose amplifier analog IC semiconductor single-supply operation 5 V power supply 300 V/µs slew rate 54 dB CMRR xDSL customer-premises equipment ADSL USB PCMCIA PCI 8-pin SOIC SOIC family surface mount
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen