AD8608ARZ - Quad Precision CMOS Rail-to-Rail Op Amp | Analog Devices
Teilenummer: AD8608ARZ ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $2.85 | $2,85 |
| 10 | $2.56 | $25,60 |
| 100 | $2.28 | $228,00 |
| 500 | $2.05 | $1.025,00 |
| 1.000 | $1.82 | $1.820,00 |
AD8608ARZ Übersicht
An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, used in analog signal conditioning, filtering, and instrumentation. The AD8608 is a precision CMOS op amp, meaning it uses complementary metal-oxide-semiconductor technology to achieve very low input bias currents (1 pA maximum) and low offset voltage (65 µV maximum), making it ideal for high-impedance sensor interfaces and precision analog circuits.
Key features of the AD8608ARZ include low offset voltage of 65 µV maximum, low input bias current of 1 pA maximum, low noise of 8 nV/√Hz, wide bandwidth of 10 MHz, high open-loop gain of 1000 V/mV, and unity-gain stability. The rail-to-rail input and output capability allows the amplifier to operate with the full supply range, maximizing dynamic range in single-supply systems.
The AD8608 uses a CMOS architecture with a precision input stage that provides low offset and low noise while maintaining high speed. The combination of low offsets, low noise, very low input bias currents, and high speed makes these amplifiers useful in a wide variety of applications, including filters, integrators, photodiode amplifiers, and high-impedance sensors. Audio and other AC applications benefit from the wide bandwidth and low distortion.
Typical applications include precision active filters, photodiode amplification, battery-powered instrumentation, and portable medical devices. The quad configuration in a 14-lead SOIC package saves board space and simplifies PCB layout for multi-channel systems.
When designing with the AD8608, ensure proper power supply decoupling with 0.1 µF ceramic capacitors close to the supply pins. The rail-to-rail output stage can drive capacitive loads, but for best stability, use a series resistor if the load capacitance exceeds 100 pF.
Drop-in-Alternativen für AD8608ARZ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit AD8608ARZ (gleiche Bauform und Footprint) – abweichend in Package, Number of Channels, Gain Bandwidth Product, Slew Rate, Supply Voltage Range.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
AD8608ARZ-REEL7
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
AD8608ARZ Grenzwerte & elektrische Eigenschaften
| Number of Channels | 4 |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Input Offset Voltage (max) | 65 µV |
| Input Bias Current (max) | 1 pA |
| Voltage Noise Density | 8 nV/√Hz |
| Gain Bandwidth Product | 10 MHz |
| Open-Loop Gain | 1000 V/mV |
| Rail-to-Rail Input | Yes |
| Rail-to-Rail Output | Yes |
| Unity Gain Stable | Yes |
| Gehäuse | 14-lead SOIC (narrow body) |
| Betriebstemperaturbereich | -40°C to +125°C |
| RoHS Compliant | Yes |
AD8608ARZ Pin-Konfiguration
| Pin 1 | OUT A — Output of amplifier A |
| Pin 2 | -IN A — Inverting input of amplifier A |
| Pin 3 | +IN A — Non-inverting input of amplifier A |
| Pin 4 | V+ — Positive supply |
| Pin 5 | +IN B — Non-inverting input of amplifier B |
| Pin 6 | -IN B — Inverting input of amplifier B |
| Pin 7 | OUT B — Output of amplifier B |
| Pin 8 | OUT C — Output of amplifier C |
| Pin 9 | -IN C — Inverting input of amplifier C |
| Pin 10 | +IN C — Non-inverting input of amplifier C |
| Pin 11 | V- — Negative supply (ground in single-supply) |
| Pin 12 | +IN D — Non-inverting input of amplifier D |
| Pin 13 | -IN D — Inverting input of amplifier D |
| Pin 14 | OUT D — Output of amplifier D |
Typische Anwendungen
AD8608ARZ ist geeignet für 6 Anwendungs: Precision Active Filters, Photodiode Amplifiers, Battery-Powered Instrumentation, Portable Medical Devices, Audio Signal Conditioning, Data Acquisition Systems.
Precision Active Filters
The AD8608ARZ's low offset voltage (65 µV max) and wide bandwidth (10 MHz) make it ideal for active filter designs. In a multiple-feedback low-pass filter, the quad configuration allows implementing 4th-order filters in a single package. The rail-to-rail output ensures maximum signal swing, while the low noise (8 nV/√Hz) preserves signal integrity. For high-Q filters, the high open-loop gain (1000 V/mV) minimizes gain error. The CMOS input stage with 1 pA bias current reduces DC errors from source impedance. This makes the AD8608ARZ suitable for anti-aliasing filters in data acquisition systems and audio crossover networks.
Empfohlen
Photodiode Amplifiers
The AD8608ARZ's ultra-low input bias current (1 pA max) is essential for photodiode transimpedance amplifiers, where bias current errors directly affect accuracy. The low voltage noise (8 nV/√Hz) and wide bandwidth (10 MHz) support high-speed optical detection. In a transimpedance configuration, the amplifier converts photodiode current to voltage with high precision. The rail-to-rail output allows full-scale voltage swing for subsequent ADC conversion. The quad configuration enables multi-channel light sensing in applications like pulse oximetry and ambient light monitoring. The CMOS input stage minimizes leakage current, ensuring accurate low-light measurements.
Empfohlen
Battery-Powered Instrumentation
The AD8608ARZ operates from a single 2.7V to 5.5V supply, making it ideal for battery-powered instruments. Its low supply current (per amplifier) extends battery life, while the rail-to-rail input/output maximizes dynamic range in low-voltage systems. The quad configuration reduces component count and board space in multi-channel data loggers. The low offset voltage (65 µV) and low noise (8 nV/√Hz) ensure accurate measurements in portable medical devices and field instruments. The wide bandwidth (10 MHz) supports real-time signal processing. The CMOS input stage with 1 pA bias current is suitable for high-impedance sensors like pH probes.
Empfohlen
Portable Medical Devices
The AD8608ARZ's low noise (8 nV/√Hz) and low offset (65 µV) are critical for medical instrumentation like ECG and EEG amplifiers. The rail-to-rail input/output allows operation at low supply voltages, essential for battery-powered devices. The quad configuration enables multi-channel biopotential measurement in a compact SOIC-14 package. The high input impedance (due to 1 pA bias current) prevents loading of biological signals. The wide bandwidth (10 MHz) supports high-frequency components in neurological signals. The industrial temperature range (-40°C to +125°C) ensures reliability in clinical environments.
Empfohlen
Audio Signal Conditioning
The AD8608ARZ's low distortion and wide bandwidth (10 MHz) make it suitable for audio applications such as active crossovers and equalizers. The low noise (8 nV/√Hz) ensures a clean signal path, while the rail-to-rail output provides maximum headroom in single-supply audio systems. The quad configuration allows implementing stereo filters in one package. The high open-loop gain (1000 V/mV) reduces harmonic distortion. The CMOS input stage with 1 pA bias current minimizes DC offset in audio paths. The 2.7V to 5.5V supply range is compatible with portable audio devices.
Empfohlen
Data Acquisition Systems
The AD8608ARZ is ideal for data acquisition front-ends, providing signal conditioning for ADCs. Its low offset (65 µV) and low noise (8 nV/√Hz) ensure accurate signal conversion. The rail-to-rail output drives ADC inputs to full scale, maximizing dynamic range. The quad configuration allows conditioning multiple channels simultaneously. The wide bandwidth (10 MHz) supports high-speed sampling. The CMOS input stage with 1 pA bias current is suitable for high-impedance sensors. The 2.7V to 5.5V supply range matches modern ADC supply voltages, simplifying power design.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für AD8608ARZ – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | AD8608ARZ-REEL7 | AD8608ARUZ | AD8628ARZ | OPA4227 | OPA4376 |
|---|---|---|---|---|---|---|
| Package | 14-lead SOIC | 14-lead SOIC | 14-lead TSSOP | 8-lead SOIC | 14-lead SOIC | 14-lead SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Texas Instruments |
| Number of Channels | 4 | 4 | 4 | 1 | 4 | 4 |
| Supply Voltage Range | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | ±2.5V to ±18V | 2.2V to 5.5V |
| Input Offset Voltage (max) | 65 µV | 65 µV | 65 µV | 5 µV | 75 µV | 25 µV |
| Input Bias Current (max) | 1 pA | 1 pA | 1 pA | 30 pA | 2.5 nA | 0.2 pA |
| Voltage Noise Density | 8 nV/√Hz | 8 nV/√Hz | 8 nV/√Hz | 22 nV/√Hz | 4.5 nV/√Hz | 7.5 nV/√Hz |
| Gain Bandwidth Product | 10 MHz | 10 MHz | 10 MHz | 2.5 MHz | 8 MHz | 5.5 MHz |
Wichtigste Unterscheidungsmerkmale
- Ultra-low input bias current of 1 pA max (vs. OPA4227)
- Rail-to-rail input and output (vs. OPA4227)
- Quad configuration in SOIC-14 (vs. AD8628ARZ)
Designhinweise
The AD8608ARZ operates from a single 2.7V to 5.5V supply. Use a 0.1 µF ceramic capacitor close to each supply pin (V+ and V-) to decouple high-frequency noise. For best performance, also add a 10 µF tantalum capacitor in parallel for low-frequency decoupling. Ensure the supply voltage does not exceed 5.5V to avoid damage.
For optimal performance, place the AD8608ARZ away from high-frequency digital circuits. Use a ground plane to minimize noise coupling. Keep feedback resistors and input traces short to reduce parasitic capacitance. For high-impedance inputs, guard rings around the input pins can reduce leakage currents.
The rail-to-rail output stage can drive capacitive loads, but for loads exceeding 100 pF, a series resistor (e.g., 50-100 Ω) is recommended to maintain stability. Also, avoid exceeding the absolute maximum supply voltage of 6V. The input common-mode range extends beyond the rails, but do not apply voltages beyond the supply rails to prevent latch-up.
Compliance-Informationen
RoHS compliant per Analog Devices product page. No AEC-Q100 qualification indicated for this part.
