AD8628ARZ-REEL7 - 2.5MHz Zero-Drift Op Amp | Analog Devices
Teilenummer: AD8628ARZ-REEL7 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $2.11 | $2,11 |
| 10 | $1.87 | $18,70 |
| 100 | $1.56 | $156,00 |
| 500 | $1.36 | $680,00 |
| 1.000 | $1.24 | $1.240,00 |
AD8628ARZ-REEL7 Übersicht
A zero-drift (auto-zero/chopper) amplifier is an op amp that continuously corrects its input offset voltage using an internal switching technique. In the broader hierarchy, the AD8628 is an auto-zero amplifier, which is a subset of zero-drift amplifiers, which are a class of precision operational amplifiers inside the larger analog amplifier ecosystem. This topology achieves offset voltages in the microvolt range without external nulling components.
Key features include a maximum input offset voltage of 1µV, maximum input bias current of 30pA, and rail-to-rail input/output behavior. The 2.5MHz bandwidth and 1V/µs slew rate support data acquisition and sensor signals while the ultra-low offset removes the need for system calibration in many dc-accurate circuits. The AD8628 also greatly reduces the digital switching noise found in many chopper-stabilized designs, according to the Analog Devices datasheet.
The architecture uses a charge-balancing auto-zero principle. Analog Devices states that the amplifier provides benefits previously found only in expensive auto-zeroing or chopper-stabilized amplifiers. No external capacitor is required for the nulling function. This simplifies PCB layout and reduces BOM cost. The 2.7V to 5V supply range makes it compatible with 3.3V and 5V ADCs, microcontrollers, and sensor front ends.
Typical applications include industrial sensor signal conditioning, load cell and weighing scale front ends, medical instrumentation like ECG and glucose monitors, battery-powered portable devices, and ADC driver stages for high-resolution SAR or delta-sigma converters. The AD8628ARZ-REEL7 is the 7-inch tape-and-reel version of the AD8628ARZ for high-volume assembly.
Designers should ensure clean supply bypassing and, because auto-zero amplifiers use an internal clock, keep high-impedance input traces away from digital noise sources. The rail-to-rail output allows direct interface to many ADCs without an additional level-shifting stage.
Drop-in-Alternativen für AD8628ARZ-REEL7 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit AD8628ARZ-REEL7 (gleiche Bauform und Footprint) – abweichend in Supply Voltage Range, Number of Channels, Amplifier Type, Gain Bandwidth Product, Input Bias Current.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
AD8628WARZ-R7
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADA4522-1ARZ
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$1.42 / Stück
Datenblatt ansehen →OPA388AIDR
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MCP6V11-E/SN
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MAX4238ASA+T
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
AD8628ARZ-REEL7 Grenzwerte & elektrische Eigenschaften
| Amplifier Type | Zero-Drift / Auto-Zero / Chopper |
| Number of Channels | 1 |
| Gain Bandwidth Product | 2.5 MHz |
| Slew Rate | 1 V/µs |
| Input Offset Voltage (max) | 1 µV |
| Input Bias Current (max) | 30 pA |
| Supply Voltage Range | 2.7 V to 5 V |
| Input Type | Rail-to-Rail |
| Ausgangstyp | Rail-to-Rail |
| Gehäuse / Bauform | 8-SOIC (SOIC-8) |
| Montageart | Surface Mount |
AD8628ARZ-REEL7 8-soic (soic-8) Pinbelegungsleitfaden
Pinbelegung für AD8628ARZ-REEL7 (8-soic (soic-8)-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für AD8628ARZ-REEL7.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
AD8628ARZ-REEL7 ist geeignet für 6 Anwendungs: Industrial Sensor Signal Conditioning, Weight Scale and Load Cell Front End, Medical and Biomedical Amplification, Battery-Powered Portable Instrumentation, ADC Driver for High-Resolution Data Acquisition, Portable Temperature Transmitter / IoT Sensor.
Industrial Sensor Signal Conditioning
The AD8628ARZ-REEL7 is ideal for pressure, strain, and thermocouple signal conditioning because of its 1µV offset and 30pA input bias current. In a typical bridge amplifier, the rail-to-rail output can swing close to the ADC full-scale range. Placed between a sensor bridge and a 24-bit delta-sigma ADC, the amplifier provides dc-accurate gain without adding input offset errors or requiring an external nulling capacitor. The 2.7V to 5V supply range is compatible with both 3.3V and 5V industrial sensor modules.
Empfohlen
Weight Scale and Load Cell Front End
A load cell outputs millivolt-level signals that demand low offset and low drift over temperature. The AD8628's maximum 1µV offset voltage and auto-zero architecture keep the amplified bridge signal stable, while the 2.5MHz gain-bandwidth product is more than sufficient for dc load-cell measurements. The rail-to-rail output allows a direct interface to a high-resolution ADC such as the AD7799BRUZ without extra gain stages. This makes the AD8628ARZ-REEL7 a dependable building block for bench scales, platform scales, and force measurement systems.
Empfohlen
Medical and Biomedical Amplification
For ECG, glucose monitors, and other biomedical front ends, the AD8628ARZ-REEL7 provides the low bias current, low offset, and rail-to-rail performance needed to preserve weak biological signals. The 30pA input bias current minimizes loading on high-impedance electrodes, and the 2.7V minimum supply accommodates 3V battery-powered medical devices. When used ahead of a precision ADC, the amplifier reduces baseline wander and calibration overhead. The auto-zero topology also lowers 1/f noise, which is critical for low-frequency biomedical measurements.
Empfohlen
Battery-Powered Portable Instrumentation
The AD8628ARZ-REEL7 operates from a 2.7V to 5V supply, making it well suited for 3V lithium and 5V USB-powered portable instruments. Its rail-to-rail input/output maximizes dynamic range while the 1µV offset and 30pA bias preserve measurement accuracy without frequent calibration. Because no external nulling capacitor is required, the bill of materials stays low and the PCB layout is simplified. The 2.5MHz bandwidth also supports moderate-speed sensor sampling in handheld data loggers and field calibrators.
Empfohlen
ADC Driver for High-Resolution Data Acquisition
Precision SAR and delta-sigma ADCs require low-offset, low-drift drivers to avoid degrading converter accuracy. The AD8628ARZ-REEL7's 1µV offset and 30pA bias are negligible at 16- to 24-bit resolution, while the rail-to-rail output can drive the ADC input without clipping near the supply rails. The 2.5MHz gain-bandwidth product supports sampling rates up to tens of kilo-samples per second when used as a unity-gain buffer. Placing a small RC filter between the op amp and ADC input reduces sampled noise and improves overall ENOB.
Empfohlen
Portable Temperature Transmitter / IoT Sensor
In IoT temperature transmitters, the AD8628ARZ-REEL7 provides stable amplification for thermocouples, RTDs, or diode temperature sensors. Its zero-drift performance reduces measurement error across the -40°C to +125°C operating range, and the rail-to-rail output directly feeds typical microcontroller ADCs. Combined with a low-power temperature sensor and a precision ADC, this op amp can form a highly accurate, battery-friendly sensing node. The small SOIC-8 package also makes it practical for compact wireless sensor modules.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für AD8628ARZ-REEL7 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | AD8628WARZ-R7 | ADA4522-1ARZ | OPA388AIDR | MCP6V11-E/SN |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Microchip Technology |
| Package | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 |
| Amplifier Type | Zero-Drift / Auto-Zero | Zero-Drift / Auto-Zero | Zero-Drift / Auto-Zero | Zero-Drift / Auto-Zero | Zero-Drift / Auto-Zero |
| Number of Channels | 1 | 1 | 1 | 1 | 1 |
| AEC-Q100 Qualification | No | Yes | No | No | No |
Wichtigste Unterscheidungsmerkmale
- AEC-Q100 grade is available without a footprint change (vs. AD8628WARZ-R7)
- Low 2.7V minimum supply and 30pA bias (vs. OPA388AIDR)
- Auto-zero topology with no external nulling capacitor (vs. MCP6V11-E/SN)
Designhinweise
Place 0.1µF and 10µF bypass capacitors close to the V+ and V- supply pins. Keep feedback resistor traces short and route high-impedance input traces away from the internal auto-zero clock and digital logic. A small RC filter at the output can reduce chopper residue when driving an ADC.
Because this is an auto-zero/chopper amplifier, the internal switching clock can couple into high-impedance nodes. Do not run noisy digital traces beneath the input pins. If the application is dc or low-frequency, add a low-pass filter at the output to suppress chopper artifacts.
The AD8628ARZ-REEL7 is specified for 2.7V to 5V supply. Thermal stress is usually not critical for low quiescent current, but when driving a 30mA load from the 5V rail, calculate power dissipation using (V+ - Vout) * Iload. Keep the junction temperature within the datasheet limit by providing adequate copper area on the SOIC-8 PCB footprint.
Compliance-Informationen
RoHS/AEC-Q100 status was not explicitly confirmed in the verified web snippets. The Z suffix in the part number typically indicates a lead-free/RoHS version, but this should be verified against the manufacturer datasheet before compliance certification.
