Analog Devices

AD9548BCPZ - 725MHz Clock Synchronizer | Analog Devices

Teilenummer: AD9548BCPZ ✓ Aktiv
88-lead LFCSP with exposed pad Package 725 MHz Speed
MOQ: 1 |

AD9548BCPZ Übersicht

Analog Devices AD9548BCPZ is an application-specific clock generator and synchronizer with a maximum listed operating frequency of 725 MHz, eight configurable reference-input paths, and clock-generation capability for precision telecommunications systems. The device is packaged in an 88-lead LFCSP with exposed pad measuring 12 mm by 12 mm. Its architecture supports reference validation, frequency monitoring, programmable reference switching, hitless synchronization, and holdover operation.

An application-specific clock and timing IC is a specialized member of the clock and timing IC hierarchy that converts external reference signals into stable, selectable clock outputs. Clock generators and synchronizers are used inside network equipment, optical transport systems, test instruments, and industrial timing subsystems. Their role is to preserve frequency accuracy during reference changes and maintain predictable phase relationships across multiple clock domains.

The AD9548 can accept references from 1 Hz to 750 MHz. Four pairs of reference-input pins can each be configured as a differential input or as two independent single-ended inputs. Reference validation and frequency monitoring operate to 1 ppm, while programmable priority determines how the device selects among available references. The AD9548 also accepts a one-pulse-per-second reference, which supports synchronization to external time and frequency standards.

Its DDS-based digital PLL architecture provides very low-noise clock synthesis. The device supports hitless reference switching, automatic holdover, reference-clock monitoring, and multiple output configurations for demanding communications infrastructure. These functions help a system reject reference disturbances and maintain coherent timing while one reference is validated, selected, or replaced. Exact noise, jitter, output-current, and channel-count limits depend on the selected configuration and should be confirmed in the manufacturer data sheet.

Typical uses include Ethernet timing, SONET/SDH infrastructure, Stratum clock generation, frequency synchronization, and synchronization of precision measurement equipment. A multi-reference architecture is particularly useful where availability and traceability are more important than supporting only one external clock source. The manufacturer recommends the AD9548 for new designs and offers an EVAL-AD9548 evaluation platform for system-level verification.

When implementing this device, treat every reference input as a precision clock domain. Route reference signals away from switching nodes, use controlled-impedance connections where required, and keep decoupling close to the supply and ground pins. The exposed pad requires careful thermal design and a manufacturable ground-via pattern to transfer heat into the PCB rather than limiting performance through excessive junction temperature.

This page combines the verified manufacturer product information, package and frequency details, sourcing paths, and practical integration guidance. It also distinguishes true board-level drop-in replacements from related clock products so that designers can assess footprint compatibility, architecture, and synchronization features before changing an existing telecom or industrial timing design.

Drop-in-Alternativen für AD9548BCPZ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

AD9548BCPZ Technische Daten

Product Type Application-specific clock generator and synchronizer
Maximum Listed Operating Frequency 725 MHz
Maximum Reference Input Frequency 750 MHz
Minimum Reference Input Frequency 1 Hz
Reference Input Count 8 input paths
Reference Input Configuration 4 pairs, each configurable as differential or as 2 single-ended inputs
Ausgangskonfiguration Up to 8 outputs
Frequency Monitoring Accuracy 1 ppm
Reference Selection Programmable input reference switchover priority
Synchronization Feature Hitless reference switching
Holdover Feature Automatic holdover
Time Reference Support 1 pulse per second reference input
Clock Architecture DDS-based digital PLL
Gehäuse 88-lead LFCSP with exposed pad
Package Dimensions 12 mm x 12 mm
Montageart Surface mount
Betriebstemperaturbereich -40°C to +85°C

AD9548BCPZ 12 mm x 12 mm Pinbelegungsleitfaden

Pinbelegung für AD9548BCPZ (12 mm x 12 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für AD9548BCPZ im 12 mm x 12 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für AD9548BCPZ.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

AD9548BCPZ ist geeignet für 6 Anwendungs: Telecom Network Synchronization, Ethernet Timing Infrastructure, SONET and SDH Transport Equipment, Precision Test and Measurement, Stratum Clock Generation, Industrial Timing and Synchronization.

🌐

Telecom Network Synchronization

The AD9548BCPZ fits telecom equipment that must select and monitor external timing references because it accepts sources from 1 Hz to 750 MHz across four configurable input pairs. Its 1 ppm reference monitoring, programmable switchover priority, and hitless switching help maintain continuous clock service during source changes. The DDS-based digital PLL can also enter automatic holdover when the active reference fails validation, giving line-card, transport, and aggregation equipment a controlled timing-failure strategy rather than an unprotected free-running clock.

🌐

Ethernet Timing Infrastructure

The AD9548BCPZ is appropriate for Ethernet equipment requiring redundant synchronization and disciplined reference handling. Four differential or single-ended input pairs provide flexibility for pairing primary and backup clocks, while programmable priority determines which validated source drives the synthesis system. Reference frequencies spanning 1 Hz to 750 MHz support both one-pps timing disciplines and high-frequency oscillator references, and the 725 MHz listed operating frequency supports demanding network timing architectures.

📡

SONET and SDH Transport Equipment

AD9548BCPZ fits SONET and SDH transport systems where clock continuity and reference traceability are central to service quality. Its hitless reference switching helps avoid output interruption during source migration, and automatic holdover provides controlled behavior when a selected reference fails validation. The device can monitor frequency at 1 ppm and accepts references up to 750 MHz, making it suitable for equipment combining low-frequency synchronization sources with high-frequency local references.

🖥️

Precision Test and Measurement

The AD9548BCPZ can serve precision test systems that need stable synthesis from multiple references. Hitless switching allows a bench instrument to move between disciplined sources without intentionally interrupting the output clock, while automatic holdover limits the impact of a temporary reference interruption. Its reference monitoring, programmable selection priority, and broad 1 Hz to 750 MHz input range support laboratory environments that mix one-pps standards, rubidium references, and high-frequency oscillators.

⏱️

Stratum Clock Generation

AD9548BCPZ is suitable for Stratum-oriented timing subsystems that require disciplined source validation and controlled reference transfer. Programmable input priority helps the system establish a deterministic selection order, while hitless switching reduces disruption when the preferred reference changes. The ability to accept one-pulse-per-second references supports systems connected to external time and frequency standards, and the 1 ppm monitoring capability provides a defined basis for detecting an unsuitable source.

🏭

Industrial Timing and Synchronization

AD9548BCPZ can support industrial systems that synchronize distant controllers, acquisition nodes, or signal-processing equipment to a common reference. Multiple reference inputs allow primary and backup clocks to coexist without external switching hardware, and hitless switching preserves the synthesized output during controlled source transfer. Automatic holdover improves fault tolerance when a remote reference becomes unreliable, while the broad input range accommodates both low-frequency synchronization signals and local high-frequency oscillators.

Zusammenfassung der empfohlenen Produkte

EVAL-AD9548 Evaluation platform for the AD9548 clock generator and synchronizer Verwendet in: Telecom Network Synchronization, Ethernet Timing Infrastructure, SONET and SDH Transport Equipment, Precision Test and Measurement, Stratum Clock Generation, Industrial Timing and Synchronization AD9540BCPZ Related Analog Devices timing-synchronizer family member Verwendet in: Telecom Network Synchronization, SONET and SDH Transport Equipment, Stratum Clock Generation AD9548BCPZ Analog Devices Verwendet in: Ethernet Timing Infrastructure, Precision Test and Measurement, Industrial Timing and Synchronization
What is the AD9548BCPZ used for?
The AD9548BCPZ is an application-specific clock generator and synchronizer designed for precision timing systems. It supports references from 1 Hz to 750 MHz, provides reference validation and frequency monitoring at 1 ppm, and can perform hitless reference switching and automatic holdover. According to the Analog Devices AD9548 Data Sheet, Revision H, its architecture supports up to eight reference inputs and up to eight outputs, making it suitable for telecom synchronization, measurement systems, and other clock architectures requiring reference redundancy.
How many reference inputs and outputs does the AD9548BCPZ support?
The AD9548 supports up to eight reference input paths and up to eight outputs. Four pairs of input pins can each operate as one differential reference or as two independent single-ended references. This flexibility lets a design combine differential sources with independent clocks while retaining programmable input priority. The Analog Devices AD9548 product page identifies the device as a quad or octal input network clock generator and synchronizer, while the EVAL-AD9548 page confirms the eight-input, eight-output capability of the family.
What is the maximum clock frequency supported by AD9548BCPZ?
The AD9548BCPZ is listed with a maximum operating frequency of 725 MHz, and its reference inputs accept frequencies from 1 Hz to 750 MHz. The distinction matters because a reference input may be presented at a higher frequency than the generated clock or output specification being implemented. According to the Analog Devices AD9548 Data Sheet, Revision H, engineers should use the complete timing and frequency tables to confirm operation for each output configuration.
Where can I download the AD9548BCPZ datasheet PDF?
The official AD9548 product page provides the manufacturer documentation and the AD9548 Data Sheet, Revision H. Use the Analog Devices product page at https://www.analog.com/en/products/ad9548.html to access the current data sheet, product selection table, software, tools, and evaluation resources. The target suffix BCPZ identifies the 88-lead LFCSP package, while the data sheet contains family-level electrical, pinout, reference-input, output, and application information needed for design work.
Where can I find the AD9548BCPZ pinout?
The AD9548BCPZ pinout is published in the Analog Devices AD9548 Data Sheet, Revision H under the pin-description and package information for the 88-lead LFCSP. Use that table when assigning all 88 PCB nets and when identifying the exposed pad. The official page is https://www.analog.com/en/products/ad9548.html. For first-stage hardware, the EVAL-AD9548 evaluation board can also help verify the intended reference and output topology before committing to a custom layout.
Does the AD9548BCPZ support hitless switching and holdover?
Yes. The AD9548 supports hitless reference switching and automatic holdover. Hitless switching is intended to transfer the clock reference without an interruption in the output signal, while automatic holdover maintains timing operation when the selected reference becomes unavailable or fails validation. The Analog Devices EVAL-AD9548 page identifies both capabilities, and the AD9548 Data Sheet, Revision H provides the operating conditions, status behavior, and configuration details needed for implementation.
When should I choose the AD9548BCPZ over the AD9540BCPZ?
Choose the AD9548BCPZ when the design benefits from its newer clock-generation and synchronization architecture, broad reference-frequency coverage, reference validation, and hitless switching. The AD9540BCPZ is a related clock product but should not be assumed to be pin-compatible with the AD9548BCPZ. According to the published AD9548 product information, the AD9548 supports references up to 750 MHz, four configurable reference pairs, automatic holdover, and one-pulse-per-second input capability. Confirm the complete pin and electrical comparison before considering any replacement.
Is the AD9548BCPZ suitable for Ethernet and SONET/SDH timing?
The AD9548BCPZ is suitable for Ethernet, SONET/SDH, Stratum, and related network-timing applications. The Analog Devices AD9548 product page describes it as a quad or octal input network clock generator and synchronizer, while distributor product information identifies Ethernet, SONET/SDH, and Stratum clock or frequency-generation roles. Its reference validation, 1 ppm monitoring, programmable source priority, hitless switching, and holdover support dependable synchronization across multiple external references.
What is the best drop-in replacement for AD9548BCPZ?
No independent, verified 88-lead LFCSP drop-in replacement is established by the available manufacturer and cross-reference information. AD9548BCPZ-REEL7 has the same electrical part and package but differs only in reel packing, so it is not a useful engineering alternative. The related AD9540BCPZ has a different product architecture and cannot be labeled drop-in without a verified pin-by-pin comparison. Treat any replacement as a redesign until footprint, supply pins, reference inputs, outputs, and control functions have been checked against the AD9548 Data Sheet, Revision H.
Can AD9548BCPZ accept a one-pulse-per-second reference?
Yes. The AD9548 can accept a one-pulse-per-second reference input, allowing it to synchronize with external timing disciplines that provide a one-pps signal. This capability complements its broader reference range of 1 Hz to 750 MHz and is useful in systems requiring disciplined time transfer or holdover behavior. The Analog Devices EVAL-AD9548 page explicitly identifies one-pps reference acceptance, while the AD9548 Data Sheet, Revision H defines the associated pin and operating requirements.
Where can I buy AD9548BCPZ and check current availability?
Use the Request a Quote form on this page to request the current AD9548BCPZ price, stock position, minimum order quantity, and delivery schedule. The AD9548BCPZ is also listed by authorized distribution channels and appears as an active manufacturer product recommended for new designs. Because inventory and commercial terms can change quickly, request a written quotation for the exact 88-lead LFCSP suffix rather than relying on an archived listing or assuming that every package variant has identical availability.
What is the price of AD9548BCPZ?
The current commercial price for AD9548BCPZ should be requested through the Request a Quote form on this page. The form is the appropriate path for an exact-match quotation, quantity breaks, lifecycle confirmation, and expected delivery information. Published catalog information includes family and individual listing prices, but such values can reflect different quantities, dates, or package suffixes and should not be treated as a current executable quotation for the exact AD9548BCPZ order code.
What is the lead time for AD9548BCPZ?
The current lead time for AD9548BCPZ should be confirmed through the Request a Quote form on this page. Lead time can depend on order quantity, package suffix, authorized-channel inventory, and whether the order includes scheduled delivery rather than immediate shipment. Analog Devices lists the AD9548 as recommended for new designs, which supports continued product planning, but it does not by itself guarantee immediate availability for every production quantity. Obtain a quantity-specific schedule before committing the build date.
Is AD9548BCPZ in stock?
AD9548BCPZ inventory should be checked through the Request a Quote form on this page because stock changes by quantity and purchasing channel. The manufacturer recommends the AD9548 family for new designs, and distributor listings show the exact BCPZ order code, indicating that the part remains actively sourced. A quotation response should state the available quantity, assembly and test status, traceability, and estimated delivery rather than relying on a generic family-level stock indication.
What are the key specifications of AD9548BCPZ that engineers should know?
The key AD9548BCPZ specifications are a 725 MHz maximum listed operating frequency, reference inputs from 1 Hz to 750 MHz, up to eight reference paths, and up to eight outputs. Four input pairs can operate differentially or as single-ended references. Timing-management features include 1 ppm reference monitoring, programmable source priority, hitless switching, automatic holdover, and one-pulse-per-second input support. The physical implementation is an 88-lead, 12 mm by 12 mm LFCSP with an exposed pad.
What can replace the AD9548BCPZ in an existing design?
The AD9548BCPZ-REEL7 is a same-electrical-part, different-reel-packing option, not a functional redesign. No cross-manufacturer replacement in the reviewed cross-reference information is confirmed as pin-to-pin compatible with the 88-lead LFCSP. The related AD9540BCPZ may serve similar timing functions but cannot safely be called a drop-in replacement because its feature set and pin architecture differ. For an existing board, retain the AD9548 footprint and verify an approved source; for a new design, evaluate the complete AD9548 feature set against current clock-generator alternatives.

Technische Referenzdaten für AD9548BCPZ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the AD9548BCPZ when a design needs a precision network clock with up to eight reference inputs, broad reference coverage from 1 Hz to 750 MHz, validated source selection, hitless switching, and automatic holdover. It is particularly appropriate for Ethernet, SONET/SDH, Stratum, industrial timing, and test systems where reference redundancy and controlled source transfer are more important than using the smallest clock IC. AD9548BCPZ-REEL7 provides the same electrical order code in alternate production packing and can be used when reel configuration matters, but it is not a distinct engineering alternative. The AD9540BCPZ belongs to a related Analog Devices family and may be considered when its timing functions meet the design, but it should be treated as a redesign candidate rather than a confirmed pin-compatible substitute. No cross-manufacturer 88-lead LFCSP equivalent has been established, so board reuse should retain the AD9548 footprint unless a complete pin, supply, and feature audit proves compatibility.

Vergleich mit Alternativen

Parameter Dieses Produkt
Brand Analog Devices
Package 88-lead LFCSP with exposed pad, 12 mm x 12 mm
Maximum Listed Operating Frequency 725 MHz
Reference Input Frequency Range 1 Hz to 750 MHz
Reference Input Count Up to 8 inputs in 4 configurable pairs
Output Count Up to 8 outputs
Frequency Monitoring Accuracy 1 ppm
Synchronization Hitless reference switching
Holdover Automatic holdover
Clock Architecture DDS-based digital PLL

Wichtigste Unterscheidungsmerkmale

  • Supports both one-pps and high-frequency references (vs. AD9540BCPZ)
  • Provides comprehensive reference fault management (vs. AD9540BCPZ)
  • Broad reference and output configuration (vs. AD9540BCPZ)

Designhinweise

Route all reference inputs as controlled, continuous clock signals and keep them away from switching-node returns and digital edges. Match reference traces to the intended clock network impedance, keep unused input pins in their datasheet-specified states, and place termination or filtering components where they do not degrade reference phase margin. Differential reference pairs require symmetrical routing because even-order mismatch can degrade noise and spur performance.

The 88-lead LFCSP includes an exposed thermal pad that must be connected to a low-impedance ground plane and soldered according to the manufacturer's land pattern. Use a dense, mechanically reliable via array beneath the exposed pad so heat can spread into both inner and outer PCB layers. Validate the final assembly across ambient temperature and maximum output activity; a footprint with only a few thermal vias can create a board-dependent junction-temperature rise.

Decouple each supply connection directly at the package with the capacitance and voltage rating required by the AD9548 Data Sheet, Revision H. Keep high-current return paths away from sensitive reference and output-return pins, and use a quiet ground strategy so switching regulators do not share the reference return path. Confirm power-up sequencing, supply tolerances, and startup behavior in hardware rather than assuming the initialization sequence matches other clock generators.

Do not treat reference validation, frequency monitoring, hitless switching, and holdover as interchangeable functions. A reference can remain electrically connected while failing the device's validation criteria, and holdover behavior depends on correct configuration and the available clock history. Review every input's single-ended or differential mode, source priority, monitoring threshold, and output routing against the data sheet. Also verify that the selected output frequency and jitter expectations are valid for the chosen configuration.

Clock outputs require short, well-controlled paths into the receiving clock buffer, PLL, ADC, or transceiver. Avoid branch stubs, test pads, and unnecessary layer transitions, and maintain a continuous return path beneath each clock trace. Because the AD9548 can synthesize outputs up to high clock rates, evaluate edge quality, spur content, and channel loading with realistic downstream circuits. Use the evaluation board as a reference for probe and measurement technique before interpreting board-level measurements.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The current product information does not state the required compliance values. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status against the exact AD9548BCPZ ordering information and manufacturer declarations.

Ähnliche Suchanfragen

AD9548BCPZ datasheet AD9548BCPZ pinout AD9548BCPZ datasheet pdf AD9548BCPZ 725MHz AD9548BCPZ 88-LFCSP Analog Devices AD9548BCPZ AD9548BCPZ reference inputs AD9548BCPZ hitless switching AD9548BCPZ automatic holdover AD9548BCPZ equivalent AD9548BCPZ replacement AD9548BCPZ vs AD9540BCPZ AD9548BCPZ price AD9548BCPZ stock AD9548BCPZ Ethernet timing

Verwandte Bauteile & Begriffe

Analog Devices AD9548BCPZ AD9548 AD9548BCPZ-REEL7 AD9540BCPZ EVAL-AD9548 application-specific clock and timing IC clock generator synchronizer frequency synthesizer digital PLL DDS hitless reference switching automatic holdover reference validation frequency monitoring one-pulse-per-second reference SONET SDH Ethernet Stratum 88-lead LFCSP exposed pad surface-mount package reference clock
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen