AD9548BCPZ - 725MHz Clock Synchronizer | Analog Devices
部品番号: AD9548BCPZ ✓ 生産中AD9548BCPZ 概要
An application-specific clock and timing IC is a specialized member of the clock and timing IC hierarchy that converts external reference signals into stable, selectable clock outputs. Clock generators and synchronizers are used inside network equipment, optical transport systems, test instruments, and industrial timing subsystems. Their role is to preserve frequency accuracy during reference changes and maintain predictable phase relationships across multiple clock domains.
The AD9548 can accept references from 1 Hz to 750 MHz. Four pairs of reference-input pins can each be configured as a differential input or as two independent single-ended inputs. Reference validation and frequency monitoring operate to 1 ppm, while programmable priority determines how the device selects among available references. The AD9548 also accepts a one-pulse-per-second reference, which supports synchronization to external time and frequency standards.
Its DDS-based digital PLL architecture provides very low-noise clock synthesis. The device supports hitless reference switching, automatic holdover, reference-clock monitoring, and multiple output configurations for demanding communications infrastructure. These functions help a system reject reference disturbances and maintain coherent timing while one reference is validated, selected, or replaced. Exact noise, jitter, output-current, and channel-count limits depend on the selected configuration and should be confirmed in the manufacturer data sheet.
Typical uses include Ethernet timing, SONET/SDH infrastructure, Stratum clock generation, frequency synchronization, and synchronization of precision measurement equipment. A multi-reference architecture is particularly useful where availability and traceability are more important than supporting only one external clock source. The manufacturer recommends the AD9548 for new designs and offers an EVAL-AD9548 evaluation platform for system-level verification.
When implementing this device, treat every reference input as a precision clock domain. Route reference signals away from switching nodes, use controlled-impedance connections where required, and keep decoupling close to the supply and ground pins. The exposed pad requires careful thermal design and a manufacturable ground-via pattern to transfer heat into the PCB rather than limiting performance through excessive junction temperature.
This page combines the verified manufacturer product information, package and frequency details, sourcing paths, and practical integration guidance. It also distinguishes true board-level drop-in replacements from related clock products so that designers can assess footprint compatibility, architecture, and synchronization features before changing an existing telecom or industrial timing design.
ドロップイン代替品: AD9548BCPZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストAD9548BCPZ 仕様
| Product Type | Application-specific clock generator and synchronizer |
| Maximum Listed Operating Frequency | 725 MHz |
| Maximum Reference Input Frequency | 750 MHz |
| Minimum Reference Input Frequency | 1 Hz |
| Reference Input Count | 8 input paths |
| Reference Input Configuration | 4 pairs, each configurable as differential or as 2 single-ended inputs |
| 出力構成 | Up to 8 outputs |
| Frequency Monitoring Accuracy | 1 ppm |
| Reference Selection | Programmable input reference switchover priority |
| Synchronization Feature | Hitless reference switching |
| Holdover Feature | Automatic holdover |
| Time Reference Support | 1 pulse per second reference input |
| Clock Architecture | DDS-based digital PLL |
| パッケージ | 88-lead LFCSP with exposed pad |
| Package Dimensions | 12 mm x 12 mm |
| 実装タイプ | Surface mount |
| 動作温度範囲 | -40°C to +85°C |
AD9548BCPZ 12 mm x 12 mm ピン配置ガイド
AD9548BCPZ (12 mm x 12 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: AD9548BCPZ.
詳細は データシート をご参照ください。
主な用途
AD9548BCPZ の用途: 6 件s: Telecom Network Synchronization, Ethernet Timing Infrastructure, SONET and SDH Transport Equipment, Precision Test and Measurement, Stratum Clock Generation, Industrial Timing and Synchronization.
Telecom Network Synchronization
The AD9548BCPZ fits telecom equipment that must select and monitor external timing references because it accepts sources from 1 Hz to 750 MHz across four configurable input pairs. Its 1 ppm reference monitoring, programmable switchover priority, and hitless switching help maintain continuous clock service during source changes. The DDS-based digital PLL can also enter automatic holdover when the active reference fails validation, giving line-card, transport, and aggregation equipment a controlled timing-failure strategy rather than an unprotected free-running clock.
おすすめ
Ethernet Timing Infrastructure
The AD9548BCPZ is appropriate for Ethernet equipment requiring redundant synchronization and disciplined reference handling. Four differential or single-ended input pairs provide flexibility for pairing primary and backup clocks, while programmable priority determines which validated source drives the synthesis system. Reference frequencies spanning 1 Hz to 750 MHz support both one-pps timing disciplines and high-frequency oscillator references, and the 725 MHz listed operating frequency supports demanding network timing architectures.
おすすめ
SONET and SDH Transport Equipment
AD9548BCPZ fits SONET and SDH transport systems where clock continuity and reference traceability are central to service quality. Its hitless reference switching helps avoid output interruption during source migration, and automatic holdover provides controlled behavior when a selected reference fails validation. The device can monitor frequency at 1 ppm and accepts references up to 750 MHz, making it suitable for equipment combining low-frequency synchronization sources with high-frequency local references.
おすすめ
Precision Test and Measurement
The AD9548BCPZ can serve precision test systems that need stable synthesis from multiple references. Hitless switching allows a bench instrument to move between disciplined sources without intentionally interrupting the output clock, while automatic holdover limits the impact of a temporary reference interruption. Its reference monitoring, programmable selection priority, and broad 1 Hz to 750 MHz input range support laboratory environments that mix one-pps standards, rubidium references, and high-frequency oscillators.
おすすめ
Stratum Clock Generation
AD9548BCPZ is suitable for Stratum-oriented timing subsystems that require disciplined source validation and controlled reference transfer. Programmable input priority helps the system establish a deterministic selection order, while hitless switching reduces disruption when the preferred reference changes. The ability to accept one-pulse-per-second references supports systems connected to external time and frequency standards, and the 1 ppm monitoring capability provides a defined basis for detecting an unsuitable source.
おすすめ
Industrial Timing and Synchronization
AD9548BCPZ can support industrial systems that synchronize distant controllers, acquisition nodes, or signal-processing equipment to a common reference. Multiple reference inputs allow primary and backup clocks to coexist without external switching hardware, and hitless switching preserves the synthesized output during controlled source transfer. Automatic holdover improves fault tolerance when a remote reference becomes unreliable, while the broad input range accommodates both low-frequency synchronization signals and local high-frequency oscillators.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD9548BCPZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Analog Devices |
| Package | 88-lead LFCSP with exposed pad, 12 mm x 12 mm |
| Maximum Listed Operating Frequency | 725 MHz |
| Reference Input Frequency Range | 1 Hz to 750 MHz |
| Reference Input Count | Up to 8 inputs in 4 configurable pairs |
| Output Count | Up to 8 outputs |
| Frequency Monitoring Accuracy | 1 ppm |
| Synchronization | Hitless reference switching |
| Holdover | Automatic holdover |
| Clock Architecture | DDS-based digital PLL |
主な差別化要因
- Supports both one-pps and high-frequency references (vs AD9540BCPZ)
- Provides comprehensive reference fault management (vs AD9540BCPZ)
- Broad reference and output configuration (vs AD9540BCPZ)
設計ノート
Route all reference inputs as controlled, continuous clock signals and keep them away from switching-node returns and digital edges. Match reference traces to the intended clock network impedance, keep unused input pins in their datasheet-specified states, and place termination or filtering components where they do not degrade reference phase margin. Differential reference pairs require symmetrical routing because even-order mismatch can degrade noise and spur performance.
The 88-lead LFCSP includes an exposed thermal pad that must be connected to a low-impedance ground plane and soldered according to the manufacturer's land pattern. Use a dense, mechanically reliable via array beneath the exposed pad so heat can spread into both inner and outer PCB layers. Validate the final assembly across ambient temperature and maximum output activity; a footprint with only a few thermal vias can create a board-dependent junction-temperature rise.
Decouple each supply connection directly at the package with the capacitance and voltage rating required by the AD9548 Data Sheet, Revision H. Keep high-current return paths away from sensitive reference and output-return pins, and use a quiet ground strategy so switching regulators do not share the reference return path. Confirm power-up sequencing, supply tolerances, and startup behavior in hardware rather than assuming the initialization sequence matches other clock generators.
Do not treat reference validation, frequency monitoring, hitless switching, and holdover as interchangeable functions. A reference can remain electrically connected while failing the device's validation criteria, and holdover behavior depends on correct configuration and the available clock history. Review every input's single-ended or differential mode, source priority, monitoring threshold, and output routing against the data sheet. Also verify that the selected output frequency and jitter expectations are valid for the chosen configuration.
Clock outputs require short, well-controlled paths into the receiving clock buffer, PLL, ADC, or transceiver. Avoid branch stubs, test pads, and unnecessary layer transitions, and maintain a continuous return path beneath each clock trace. Because the AD9548 can synthesize outputs up to high clock rates, evaluate edge quality, spur content, and channel loading with realistic downstream circuits. Use the evaluation board as a reference for probe and measurement technique before interpreting board-level measurements.
コンプライアンス情報
The current product information does not state the required compliance values. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status against the exact AD9548BCPZ ordering information and manufacturer declarations.