Analog Devices

AD9631AN - 320 MHz Low-Distortion Op Amp | Analog Devices

Teilenummer: AD9631AN ✓ Aktiv
±6 V Vdss 8-pin PDIP Package
MOQ: 1 |

AD9631AN Übersicht

Analog Devices AD9631AN is a high-speed, voltage-feedback operational amplifier designed for low-distortion signal amplification, with 320 MHz small-signal bandwidth, 250 MHz large-signal bandwidth, and operation from dual ±6 V supplies. The device is supplied in an 8-pin PDIP package and is stable at a gain of +1.

An operational amplifier is a high-gain, active analog circuit that uses differential feedback to amplify the voltage difference between its inputs. The AD9631 belongs to the voltage-feedback operational-amplifier family within the broader amplifier IC and semiconductor hierarchy. Its high bandwidth and low distortion make it suitable for communications, instrumentation, pulse-processing, video, and data-acquisition circuits requiring accurate amplification across a wide frequency range.

The AD9631AN provides 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth, allowing it to process signals well beyond the audio band. Analog Devices describes the device as a production ultralow-distortion, high-speed op amp that is stable at gain +1. The family also typically maintains approximately 65 degrees of phase margin, providing a useful stability consideration when designing wideband gain stages. Dual ±6 V operation supports bipolar signal paths and conventional analog-system supply architecture.

The AD9631 uses voltage-feedback architecture rather than current-feedback architecture. In a voltage-feedback implementation, closed-loop bandwidth, noise gain, and feedback resistance must be evaluated together. Designers should avoid treating the quoted small-signal and large-signal bandwidth values as interchangeable: small-signal bandwidth characterizes linear response around the operating point, while large-signal bandwidth reflects behavior under greater output excursions. Component tolerances, load capacitance, PCB parasitics, and feedback-network values can alter the practical response.

Typical uses include wideband receiver front ends, pulse-diode receiver circuits, test and measurement instrumentation, video signal paths, high-speed data acquisition, and communications equipment. The dual-supply arrangement can simplify biasing of bipolar or AC-coupled signals, although system designers must account for input and output common-mode limits, output swing, package thermal behavior, and the required bypass capacitance around a high-speed device.

PCB implementation requires short feedback paths, solid ground-plane continuity, and carefully placed supply bypassing. High-speed traces should be kept short, controlled-impedance where applicable, and isolated from noisy switching nodes. Decoupling capacitors should connect to the supply and ground pins with minimal loop area. Input and output protection networks should be analyzed for capacitance because probe, connector, and protection-diode loading can materially affect bandwidth, peaking, and settling behavior.

This page combines the manufacturer's product information, family datasheet characteristics, verified distributor references, and practical guidance for high-speed amplifier layouts. It also identifies the limits of verified substitute information so engineers can distinguish exact-footprint options from functionally similar amplifiers that require different packages or different stability characteristics.

Drop-in-Alternativen für AD9631AN – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit AD9631AN (gleiche Bauform und Footprint) – abweichend in Package.

Analog Devices
Package: 8-pin PDIP (N)
Vergleichen mit AD9631AN →

AD9632AN

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Analog Devices
📦 8-pin PDIP
Voltage-feedback operational amplifier · Voltage feedback · 320 MHz · 250 MHz · 2 · Stable at gains of 2 or greater · Ultralow distortion · 1 circuit

Preis auf Anfrage

Datenblatt ansehen →

AD9631AN Grenzwerte & elektrische Eigenschaften

Amplifier Type Voltage-feedback operational amplifier
Small-Signal Bandwidth 320 MHz
Large-Signal Bandwidth 250 MHz
Stable Gain +1
Typical Phase Margin 65 degrees
Supply Voltage Range ±6 V
Total Supply Voltage 12 V
Gehäuse 8-pin PDIP
Pin-Anzahl 8 pins
Montageart Through-hole
Production Status Production

AD9631AN 8-pin pdip Pinbelegungsleitfaden

Pinbelegung für AD9631AN (8-pin pdip-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für AD9631AN im 8-pin pdip-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für AD9631AN.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

AD9631AN ist geeignet für 6 Anwendungs: Wideband Receiver Front End, Pulse-Diode Receiver Amplification, High-Speed Data Acquisition, Video Signal Conditioning, Test and Measurement Instrumentation, Communications Signal Conditioning.

🌐

Wideband Receiver Front End

The AD9631AN fits a wideband receiver front end because its 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth preserve signal amplitude across high-frequency operating bands. Its unity-gain stability supports buffer or low-gain signal-conditioning stages where cascading multiple gain stages would otherwise reduce usable bandwidth. In a practical implementation, the amplifier sits between the RF or baseband input network and the following converter or demodulator. The designer must preserve the impedance environment expected by the input source and account for the ±6 V supply rails. Probe, connector, and protection-device capacitance should be included in simulation because the layout parasitics can affect the otherwise high-bandwidth response.

📡

Pulse-Diode Receiver Amplification

The AD9631AN is suitable for pulse-diode receiver amplification because Analog Devices identifies the family as an ultralow-distortion, high-speed voltage-feedback amplifier. Its 320 MHz small-signal bandwidth provides ample frequency-range margin for handling short detector pulses and fast transition edges, while gain-of-+1 stability simplifies direct buffering. The amplifier is typically placed in the receiver’s analog signal path with feedback components chosen to establish the required closed-loop gain. Component parasitics and board inductance become increasingly important as pulse edges become shorter. Maintain short feedback loops, provide local supply bypassing, and verify output swing against the receiver’s detector amplitude to avoid clipping.

🖥️

High-Speed Data Acquisition

The AD9631AN can serve as the analog amplifier preceding a high-speed data-acquisition converter because its 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth support rapid signal transitions. Gain-of-+1 stability is useful when preserving signal integrity and bandwidth are more important than obtaining large closed-loop gain. Place the device close to the converter input to minimize trace loss and susceptibility to interference. The dual ±6 V supply arrangement supports bipolar signal conditioning, but the complete data-acquisition front end must verify input common-mode range, output swing, settling behavior, and ADC input compatibility. Probe capacitance and connector reflections should be included in the simulation rather than treated only as layout details.

📺

Video Signal Conditioning

The AD9631AN is appropriate for wideband video signal-conditioning stages that require low distortion and substantially more bandwidth than conventional general-purpose amplifiers. Its 320 MHz small-signal bandwidth covers high-definition and multi-standard video signal paths, while the gain-of-+1 stability supports unity-gain buffering between a source and a downstream display or processing circuit. Preserve the source and load impedances to avoid unintended gain errors. Use short traces and a continuous reference plane, and place supply-decoupling capacitors close to the pins. The design must also check video amplitude, sync timing, output swing, and the bandwidth roll-off at the highest supported pixel rate rather than relying only on the headline bandwidth number.

🔧

Test and Measurement Instrumentation

The AD9631AN fits high-speed test and measurement instrumentation because its 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth support rapid-edge signal acquisition, while low distortion is important when preserving the shape and amplitude of measured waveforms. The gain-of-+1 characteristic allows the device to serve as a stable buffer between a source and a measurement instrument. Keep the input path short and use controlled-impedance routing when cable or fixture transitions are unavoidable. Because cables, probes, and protection devices add capacitance, evaluate their combined loading against the closed-loop response. Dual ±6 V operation also makes the device appropriate for bipolar measurement paths, subject to common-mode and output-swing checks.

🌐

Communications Signal Conditioning

The AD9631AN supports communications signal-conditioning circuits that process wideband analog waveforms before conversion, demodulation, or further analog processing. Its 320 MHz small-signal bandwidth provides substantial headroom for high-rate channels, and the specified gain-of-+1 stability supports direct buffering. The amplifier may be placed after a mixer or receiver stage where signal amplitude must be retained without introducing substantial gain shaping. Designers should verify that the source impedance, feedback network, and load do not degrade stability. Supply decoupling and grounding are especially important because switching regulators, clock circuitry, and high-speed digital signals can couple noise into the analog node and distort the communication waveform.

Zusammenfassung der empfohlenen Produkte

AD9631ARZ Same AD9631 family in an 8-pin SO package Verwendet in: Wideband Receiver Front End, Pulse-Diode Receiver Amplification, High-Speed Data Acquisition, Video Signal Conditioning, Test and Measurement Instrumentation, Communications Signal Conditioning AD9632AN Analog Devices Verwendet in: Wideband Receiver Front End, Pulse-Diode Receiver Amplification, High-Speed Data Acquisition, Video Signal Conditioning, Test and Measurement Instrumentation, Communications Signal Conditioning
What is the AD9631AN?
The AD9631AN is an Analog Devices ultralow-distortion, high-speed voltage-feedback operational amplifier with 320 MHz small-signal bandwidth, 250 MHz large-signal bandwidth, and operation from dual ±6 V supplies. According to the Analog Devices AD9631/AD9632 family datasheet, it is stable at a gain of +1 and is offered in an 8-pin PDIP package. It is intended for wideband analog signal paths requiring high bandwidth and low distortion.
What are the key specifications of AD9631AN that engineers should know?
The AD9631AN combines 320 MHz small-signal bandwidth, 250 MHz large-signal bandwidth, gain-of-+1 stability, and dual ±6 V operation in an 8-pin PDIP package. According to the Analog Devices AD9631/AD9632 family datasheet, the amplifier typically maintains approximately 65 degrees of phase margin. These figures define its high-frequency capability, but practical performance also depends on feedback values, load capacitance, supply bypassing, and PCB parasitics.
Where can I download the AD9631AN datasheet PDF?
The official AD9631AN datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9631_9632.pdf. The document covers the AD9631 and AD9632 high-speed voltage-feedback operational amplifiers and includes the family pinout, performance characteristics, and application information. Use the package-specific ordering information when confirming that AD9631AN corresponds to the 8-pin PDIP configuration.
Where can I find the AD9631AN pinout?
The AD9631AN pinout is shown in the pin-configuration section of the official Analog Devices AD9631/AD9632 datasheet. AD9631AN is the 8-pin PDIP configuration, so its lead numbering follows the standard counter-clockwise convention used for the package. Assign signals using the datasheet pin-description table rather than inferring connections from another package such as the 8-pin SO option.
Is the AD9631AN stable at gain 1?
Yes. The AD9631AN is explicitly specified as stable at a gain of +1, according to the Analog Devices product page and AD9631/AD9632 family datasheet. This makes unity-gain use practical when the circuit requires high bandwidth without the reduced bandwidth associated with higher closed-loop noise gain. Board-level stability must still be evaluated with the actual feedback network, load, probe capacitance, and supply decoupling.
What is the bandwidth difference between AD9631AN and AD9632?
AD9631AN is optimized for stability at gain +1 and has 320 MHz small-signal bandwidth, while AD9632 is associated with gain +2 operation and has 250 MHz large-signal bandwidth in the family description. The official Analog Devices datasheet notes that bandwidth differs between the two gain configurations. Use AD9631AN when unity-gain stability is the priority, and evaluate AD9632 when the intended closed-loop gain is +2.
AD9631AN vs AD9632AN - which is better for a unity-gain amplifier?
AD9631AN is the better choice for a unity-gain stage because Analog Devices specifies it as stable at gain +1 and lists 320 MHz small-signal bandwidth. AD9632 is identified with a gain-of-+2 bandwidth specification and therefore targets a different feedback configuration. Neither choice should be made from bandwidth alone; compare output drive, distortion, supply current, noise, and the complete AC response for the intended operating frequency.
When should I choose AD9631AN instead of AD9632AN?
Choose AD9631AN when the signal chain specifically needs a voltage-feedback amplifier that is stable at unity gain. Its stated 320 MHz small-signal bandwidth and 250 MHz large-signal bandwidth are well suited to wideband buffers and low-gain stages. Choose AD9632AN when the amplifier will operate around a gain of +2 and its corresponding bandwidth, distortion, and drive characteristics better match the circuit.
Is the AD9631AN suitable for high-speed instrumentation?
The AD9631AN is suitable for many high-speed instrumentation and test signal paths because it combines 320 MHz small-signal bandwidth, low-distortion voltage-feedback operation, and gain-of-+1 stability. According to the Analog Devices family datasheet, the amplifier typically maintains approximately 65 degrees of phase margin. Practical instrumentation designs must still control probe loading, cable capacitance, connector reflections, and supply-noise coupling.
What is the best drop-in replacement for AD9631AN?
No complete drop-in replacement can be confirmed from the verified substitute information. The available cross-reference results identify search tools and the AD9631 family, but they do not establish another part with the identical 8-pin PDIP footprint, pin functions, gain-of-+1 stability, and electrical characteristics. AD9632AN is a same-family option, but its gain-of-+2 emphasis means it should not be described as an unconditional pin-for-pin replacement without design validation.
Can AD9632AN replace AD9631AN in an existing circuit?
AD9632AN may be considered only after checking closed-loop gain, stability, bandwidth, output drive, distortion, and supply requirements. The official Analog Devices family datasheet distinguishes AD9631's gain-of-+1 bandwidth behavior from AD9632's gain-of-+2 behavior, so the two are not automatically equivalent in an existing PCB. Treat AD9632AN as a family alternative requiring circuit-level validation, not a guaranteed drop-in replacement.
What is the best Analog Devices equivalent for AD9631AN?
AD9632AN is the closest documented Analog Devices family alternative because it appears in the same AD9631/AD9632 family datasheet and shares the high-speed voltage-feedback architecture. It is not automatically equivalent to AD9631AN because the family data distinguishes gain +1 performance from gain +2 performance. The 8-pin PDIP configuration must also be confirmed for the exact AD9632 ordering code before PCB substitution.
Where can I buy AD9631AN online?
Use the Request a Quote form on this page to request AD9631AN availability, current unit cost, minimum order quantity, and lead time. The product is identified by Analog Devices as being in production, but live stock and commercial terms can change by package and order quantity. This page does not quote a static price or direct buyers to an external seller.
What is the price of AD9631AN?
Submit the AD9631AN request through the Request a Quote form on this page for a current quotation. The price can vary with order quantity, package configuration, and current commercial terms, so a static figure would not reliably represent the present market. The request can also confirm whether the exact 8-pin PDIP ordering code is available for production and shipment.
What is the lead time for AD9631AN and is it in stock?
Request the current lead time, stock status, and minimum order quantity for AD9631AN using the Request a Quote form on this page. Analog Devices identifies the AD9631 as a production device, but that production status does not by itself guarantee immediate inventory of every package variant. A quotation response should confirm the current commitment for the exact AD9631AN ordering code.
How should the AD9631AN be laid out for high-speed operation?
Place the AD9631AN power bypass capacitors directly beside the supply pins and connect them to a continuous ground plane with minimal loop area. Keep the feedback resistors and signal traces short, and avoid routing inputs beside noisy switching nodes or digital return currents. According to the Analog Devices AD9631/AD9632 family datasheet, the device provides approximately 65 degrees of typical phase margin, but PCB parasitics and load capacitance still require stability checks.

Technische Referenzdaten für AD9631AN – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose AD9631AN for a high-speed voltage-feedback stage that must operate reliably around unity gain, particularly in receiver, instrumentation, data-acquisition, or video paths requiring low distortion and broad bandwidth. Its documented 320 MHz small-signal bandwidth, 250 MHz large-signal bandwidth, and ±6 V dual supplies make it appropriate for bipolar analog systems. AD9632AN is the closer same-family option when the intended closed-loop gain is +2 or when its specific large-signal performance better fits the design. Do not treat AD9632AN as an automatic substitution: check pin functions, exact package, closed-loop gain, stability margin, output drive, distortion, and the complete feedback network. For any proposed cross-brand replacement, require verified evidence of the identical 8-pin PDIP footprint and electrical compatibility rather than relying only on bandwidth similarity.

Vergleich mit Alternativen

Parameter Dieses Produkt AD9632AN
Package 8-pin PDIP 8-pin PDIP
Brand Analog Devices Analog Devices
Amplifier Architecture Voltage feedback Voltage feedback
Large-Signal Bandwidth 250 MHz 250 MHz
Specified Stable Gain +1 +2
Typical Phase Margin 65 degrees 65 degrees

Wichtigste Unterscheidungsmerkmale

  • Unity-gain stability is the principal functional distinction from AD9632AN (vs. AD9632AN)
  • Higher stated small-signal bandwidth than the large-signal rating (vs. AD9632AN)
  • Dual ±6 V operation supports conventional bipolar analog signal paths (vs. AD9632AN)

Designhinweise

Place every supply-bypass capacitor directly beside the corresponding AD9631AN power and ground pins, using the shortest possible connection to the ground plane. Keep feedback resistors close to the amplifier and avoid routing high-speed input traces beside digital clocks, switching inductors, or connector return paths. The 320 MHz small-signal bandwidth makes trace inductance, parasitic capacitance, and ground discontinuity relevant to actual performance, so evaluate the final layout with an S-parameter or transient simulation where tooling permits.

Treat source impedance, load capacitance, probe capacitance, and protection-device capacitance as part of the amplifier design rather than as external accessories. These impedances interact with the feedback network and can reduce bandwidth or introduce peaking. According to the Analog Devices AD9631/AD9632 family datasheet, the amplifier typically maintains approximately 65 degrees of phase margin, but stable operation still requires checking the complete circuit with realistic loading and supply bypassing.

Do not substitute a gain-of-+2 family member for AD9631AN without reviewing the closed-loop gain and stability requirements. AD9631AN is specifically identified as stable at gain +1, while the family documentation distinguishes the AD9632 gain +2 bandwidth behavior. Also verify common-mode range, output swing, supply sequencing, and the output load before energizing a new design; headline bandwidth alone does not establish compatibility with a particular signal chain.

Keep the 8-pin PDIP implementation away from long shared ground returns and noisy source nodes. Use a continuous ground plane where possible, avoid stubs, and provide close supply bypassing even when the surrounding system includes additional bulk capacitors. For laboratory prototypes, short twisted or coaxially routed connections are preferable to long loose hookup wire, because even a modest test lead can disturb a circuit intended to operate at hundreds of megahertz.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The available product and datasheet information does not explicitly identify RoHS, REACH, lead-free, halogen-free, or conflict-mineral status for AD9631AN. AEC-Q100 qualification is not applicable to this general-purpose operational amplifier.

Daten verifiziert am: 2026-11-10 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

AD9631AN datasheet AD9631AN pinout AD9631AN datasheet pdf AD9631AN specifications AD9631AN 320 MHz AD9631AN PDIP AD9631AN application circuit AD9631AN vs AD9632AN AD9631AN equivalent AD9631AN replacement AD9631AN price AD9631AN stock Analog Devices AD9631AN AD9631AN unity gain amplifier AD9631AN high speed op amp

Verwandte Bauteile & Begriffe

Analog Devices AD9631AN AD9631 AD9632AN AD9631ARZ operational amplifier voltage-feedback amplifier high-speed amplifier analog amplifier IC semiconductor 320 MHz small-signal bandwidth 250 MHz large-signal bandwidth gain +1 stability 65 degrees phase margin dual ±6 V supply 8-pin PDIP through-hole package low-distortion signal amplification pulse-diode receiver wideband receiver high-speed data acquisition test and measurement instrumentation video signal conditioning communications signal conditioning
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen