Analog Devices

AD976ACRS - 16-Bit 200 kSPS ADC | Analog Devices

Teilenummer: AD976ACRS ✓ Aktiv
5 V Vdss 200 ohm Rds(on) 28-lead SSOP Package On-chip clock Speed
MOQ: 1 |

AD976ACRS Übersicht

The Analog Devices AD976ACRS is a high-speed, low-power 16-bit successive-approximation ADC operating from a single 5 V supply, with a throughput rate of 200 kSPS in a 28-lead SSOP package. Its switched-capacitor architecture and parallel output interface suit signal-processing systems that require deterministic conversion timing and direct digital data transfer.

An ADC is an analog-to-digital converter, a semiconductor that converts a continuously varying analog voltage into a numerical value. Within the signal-chain hierarchy, the AD976ACRS belongs to the data-converter IC class and specifically to high-resolution, parallel-output successive-approximation ADCs. The AD976A family combines a 16-bit conversion word with a 200 kSPS sampling rate, making it suitable for precision instrumentation, industrial measurement, communications, and control systems.

Key features include single 5 V operation, a switched-capacitor conversion architecture, selectable external or internal 2.5 V reference, an on-chip clock, and a high-speed parallel interface. The manufacturer identifies the converter as a BiCMOS device, combining bipolar circuitry with CMOS logic. Maximum power dissipation is 100 mW, making the part suitable for compact systems where converter power must remain controlled.

The AD976ACRS accepts an analog input range of 0 to 5 V when operated from the specified single supply. The AD976A family is available in 28-lead SSOP and SOIC formats, while the closely related AD976 family offers a lower 100 kSPS throughput rate. An external 200 ohm resistor and 33.2 kohm resistor can provide offset-and-gain calibration in a single-supply system when the required application calls for external adjustment.

Typical applications include industrial process-control equipment, digital instrumentation, waveform acquisition, communications receivers, and embedded measurement systems. The parallel bus can feed a microcontroller, FPGA, or dedicated data-capture logic, while the on-chip clock simplifies systems that do not require an external sampling clock. Analog input conditioning remains important because the ADC does not replace front-end amplification, filtering, or reference conditioning.

Designers should follow the manufacturer pin-description table when assigning tracks and should place input, reference, and decoupling connections according to the AD976/AD976A datasheet layout guidance. Confirm signal range, conversion timing, reference stability, and output logic levels before fixing the clock and acquisition system. For applications requiring the faster 200 kSPS rate, use the AD976A rather than the 100 kSPS AD976.

Drop-in-Alternativen für AD976ACRS – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit AD976ACRS (gleiche Bauform und Footprint) – abweichend in Output Interface, Package, Process Technology, Architecture, Converter Type.

Analog Devices
Output Interface: Parallel
Package: 28-pin SSOP
Converter Type: Successive-approximation ADC
Vergleichen mit AD976ACRS →
Analog Devices
Output Interface: Parallel
Package: 28-pin SSOP
Process Technology: Proprietary BiCMOS
Vergleichen mit AD976ACRS →

AD976ACRSZ

✅ Drop-In
Analog Devices
📦 28-lead SSOP
16 bit · 200 kSPS · Successive approximation (SAR) · Single analog input · 4.75 V to 5.25 V · 1 · Parallel · Proprietary BiCMOS

Preis auf Anfrage

Datenblatt ansehen →

AD976AARSZ

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Analog Devices
📦 28-lead SSOP
Successive-approximation ADC · 16 bit · 1 channel · 200 kSPS · 5 V · 2.5 V · Parallel · BiCMOS

Preis auf Anfrage

Datenblatt ansehen →

AD976ACRS Grenzwerte & elektrische Eigenschaften

Converter Type 16-bit successive-approximation ADC
Throughput Rate 200 kSPS
Versorgungsspannung 5 V
Input Range 0 V to 5 V
Internal Reference 2.5 V
Reference Selection Internal or external reference
Maximum Power Dissipation 100 mW
Architecture Switched-capacitor
Process Technology BiCMOS
Output Interface High-speed parallel
Clock On-chip clock
Gehäuse 28-lead SSOP
Anzahl der Pins 28 pins
Montageart Surface mount
Calibration Resistor 200 ohm
Calibration Resistor 33.2 kohm

AD976ACRS 28-lead ssop Pinbelegungsleitfaden

Pinbelegung für AD976ACRS (28-lead ssop-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für AD976ACRS im 28-lead ssop-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für AD976ACRS.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

AD976ACRS ist geeignet für 6 Anwendungs: Industrial Process Measurement, Digital Instrumentation, Communications Receiver, Waveform Acquisition, Precision Feedback Control, Automated Test Equipment.

🏭

Industrial Process Measurement

AD976ACRS fits industrial process-measurement front ends that require 16-bit numerical resolution at a 200 kSPS conversion rate. Place the converter after a low-noise amplifier and analog filter so that process signals arrive within the 0 V to 5 V input range. Its single 5 V operation simplifies the supply architecture, while the parallel output can feed an FPGA or controller for real-time filtering. The 200 mW maximum power-dissipation rating supports compact measurement electronics, although designers should still verify thermal performance in the final enclosure.

🔧

Digital Instrumentation

AD976ACRS is appropriate for bench instruments and digital measurement equipment that sample precision analog inputs while transferring data through a parallel bus. Its 16-bit resolution preserves fine signal detail, and the 200 kSPS throughput provides a higher acquisition rate than the 100 kSPS AD976. An on-chip clock can support a simpler instrument architecture, while selectable internal or external 2.5 V reference options allow the design to balance simplicity against calibration requirements. Use the manufacturer timing diagram to align conversion status with output capture.

🌐

Communications Receiver

AD976ACRS can serve as the baseband conversion element in communications receivers when the system requires a 16-bit parallel-output ADC at 200 kSPS. Its switched-capacitor implementation and 5 V single-supply operation fit compact analog receiver boards. The converter should follow gain and channel-selection stages so the analog signal remains inside the 0 V to 5 V input range. Because parallel routing consumes board space, place the ADC and acquisition FPGA or controller according to the manufacturer's recommended layout and keep digital output traces away from sensitive analog inputs.

📺

Waveform Acquisition

AD976ACRS is well suited to moderate-speed waveform acquisition where 16-bit resolution and 200 kSPS sampling are sufficient. Its parallel output provides direct transfer into capture logic, avoiding the output multiplexing found in lower-pin-count converters. The on-chip clock offers a straightforward starting point for a single-converter design, and the internal or external 2.5 V reference supports both simple and calibratable architectures. Confirm acquisition latency and output timing with the AD976/AD976A datasheet before synchronizing samples to an external event.

🤖

Precision Feedback Control

AD976ACRS can provide feedback and supervisory measurements in precision control systems that require high-resolution sampling rather than very high throughput. The 16-bit conversion word offers detailed plant-state information, while the 200 kSPS rate is suitable for many servo and positioning loops. Place conditioning circuitry before the ADC to establish signal range and bandwidth, and use the single 5 V supply architecture to simplify distributed controller boards. Verify loop latency, acquisition timing, and noise performance in the complete analog chain.

🖥️

Automated Test Equipment

AD976ACRS fits automated test equipment that evaluates low-frequency or moderate-bandwidth analog nodes and needs repeatable 16-bit samples at 200 kSPS. Its parallel data output can reduce the burden on a shared acquisition bus, while the selectable 2.5 V reference supports controlled measurement conditions. A practical implementation places the converter behind source impedance control, filtering, and settling protection, then captures the output with synchronous logic. Review offset, gain, and reference calibration methods in the manufacturer datasheet for production-test accuracy.

What is the AD976ACRS and what does it convert?
The AD976ACRS is a 16-bit successive-approximation analog-to-digital converter with a 200 kSPS throughput rate. According to the Analog Devices AD976/AD976A datasheet, it uses a switched-capacitor architecture, operates from a single 5 V supply, and accepts an analog input range of 0 V to 5 V. The 28-lead SSOP package and parallel output interface make it appropriate for precision measurement systems that require direct digital data transfer.
What is the sampling rate of the AD976ACRS?
The AD976ACRS has a maximum throughput rate of 200 kSPS. Analog Devices identifies the AD976A as the 200 kSPS member of the AD976/AD976A family, while the original AD976 operates at 100 kSPS. Choose the AD976A when acquisition timing requires twice the throughput of the original AD976, and verify the complete acquisition timing against the manufacturer timing diagrams.
What is the difference between AD976ACRS and AD976?
The principal difference is throughput: AD976ACRS belongs to the AD976A family at 200 kSPS, while AD976 provides 100 kSPS. Both are 16-bit switched-capacitor ADCs using a single 5 V supply and offering internal or external 2.5 V reference choices. The AD976A is the appropriate choice when the higher conversion rate is required; AD976ACRS is not a literal 100% electrical match for AD976.
Where can I download the AD976ACRS datasheet PDF?
The official AD976ACRS datasheet PDF is available from Analog Devices at the AD976/AD976A data-sheet link on this page. It contains the device description, timing information, pin descriptions, electrical characteristics, reference options, and application details. Use the manufacturer document for final pin assignments and circuit implementation rather than relying on secondary catalog summaries.
Where can I find the AD976ACRS pinout?
The AD976ACRS pinout is presented in the pin-description table and package drawing in the official Analog Devices AD976/AD976A datasheet. The converter uses a 28-lead SSOP package with a high-speed parallel interface. Assign PCB tracks from the manufacturer pin-description table, especially for analog input, reference, clock, control, and digital output signals.
What supply voltage does the AD976ACRS require?
The AD976ACRS operates from a single 5 V supply. According to the Analog Devices AD976/AD976A datasheet, the same supply supports the switched-capacitor ADC, the internal 2.5 V reference option, the on-chip clock, and the parallel output interface. Decouple the supply close to the device and follow the manufacturer's grounding and layout guidance.
Can the AD976ACRS use an external 2.5 V reference?
Yes, the AD976ACRS supports a choice of external or internal 2.5 V reference. The internal reference simplifies the power design, while an external reference can support applications requiring a different calibration or reference strategy. External-reference designs must account for input impedance, noise, temperature drift, and decoupling requirements shown in the manufacturer datasheet.
What input range should be used with the AD976ACRS?
The AD976ACRS accepts a 0 V to 5 V analog input range when operated from the specified single 5 V supply. The manufacturer datasheet describes external 200 ohm and 33.2 kohm resistor arrangements for compensation of internal offset-and-gain adjustment in a single-supply system. Analog front-end circuitry should keep the input within the converter's specified operating limits.
What are the key specifications engineers should know about AD976ACRS?
The AD976ACRS combines 16-bit resolution, a 200 kSPS throughput rate, single 5 V operation, and a 200 mW maximum power-dissipation rating. It also provides selectable internal or external 2.5 V references, an on-chip clock, switched-capacitor conversion, and a high-speed parallel output. The Analog Devices AD976/AD976A datasheet identifies the implementation as BiCMOS and the package as 28-lead SSOP.
What can replace the AD976ACRS?
The closest pin-compatible choices are the Analog Devices AD976A variants that retain the 28-lead SSOP footprint and the 200 kSPS AD976A electrical architecture. The AD976ACRSZ is a lead-free SSOP ordering option with the same converter configuration, while the AD976AARSZ provides another SSOP ordering configuration for the AD976A family. Verify temperature grade, reference implementation, and production status before substitution.
Is the AD976ACRS the same as AD976ACRSZ?
The AD976ACRS and AD976ACRSZ represent closely related 28-lead SSOP orderings of the AD976A converter, but the Z ordering commonly denotes the lead-free termination option. The functional conversion rate remains 200 kSPS in the AD976A family. Check the ordering-information table for the exact package, temperature grade, and termination of each part before treating them as interchangeable.
When should I choose AD976ACRS instead of the AD976?
Choose AD976ACRS when a design requires the AD976A family's 200 kSPS throughput and can use its 28-lead SSOP interface. Retain the 100 kSPS AD976 only when the lower acquisition rate is sufficient or existing design constraints favor that member. Both families provide 16-bit resolution, single 5 V operation, a switched-capacitor architecture, and internal or external 2.5 V reference options.
Is AD976ACRS suitable for industrial measurement systems?
AD976ACRS is suitable for many industrial measurement and control systems requiring 16-bit conversion at 200 kSPS. Its single 5 V supply, selectable 2.5 V reference, and parallel interface support compact deterministic acquisition designs. The application still requires suitable analog conditioning, grounding, decoupling, and conversion-timing analysis to obtain repeatable measurements.
How should I use AD976ACRS in a data-acquisition circuit?
Use AD976ACRS as the terminal-stage ADC after low-noise input amplification and filtering, connect its parallel outputs to suitable digital acquisition logic, and operate it from a single 5 V supply. The on-chip clock can simplify designs that do not need an external sampling clock. Follow the manufacturer timing diagram when coordinating the clock, conversion status, and output-data capture.
Where can I request a quote for AD976ACRS?
Use the Request a Quote form on this page to request the current AD976ACRS price, stock position, lead time, and order quantity. Because legacy analog converter availability can vary by package and termination, confirm the exact AD976ACRS ordering code before approving a purchase. The form connects the request directly to XAIPART without requiring a static price commitment.
What is the lead time for AD976ACRS?
The current lead time for AD976ACRS depends on factory inventory, package configuration, and order volume. Submit the exact MPN and required quantity through the Request a Quote form on this page to obtain current scheduling information. Confirm whether the required AD976ACRS ordering configuration is in production and suitable for the intended temperature and regulatory requirements.
Is AD976ACRS currently in stock?
AD976ACRS inventory should be confirmed for the exact package and termination before committing a production schedule. Use the Request a Quote form on this page with your required quantity and target date to obtain current stock and lead-time information. This avoids confusing the AD976ACRS ordering code with the lead-free AD976ACRSZ variant.
What is the best AD976AARSZ equivalent for AD976ACRS?
The AD976AARSZ is an Analog Devices AD976A-family part in a 28-lead SSOP configuration and can be considered for a pin-compatible replacement review. It retains the family's 16-bit resolution and 200 kSPS throughput, but the exact temperature grade and ordering suffix must be checked before substitution. The AD976ACRSZ is another closely related SSOP option to evaluate.
Does the AD976ACRS require an external clock?
No external clock is mandatory when the AD976ACRS uses its on-chip clock. The Analog Devices AD976/AD976A family includes an on-chip clock and a high-speed parallel output interface. Some system architectures may still drive an external clock to synchronize multiple converters or establish a common sampling event, so check the clock and timing section of the manufacturer datasheet.

Technische Referenzdaten für AD976ACRS – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose AD976ACRS when the design specifically requires a 16-bit ADC with 200 kSPS throughput, single 5 V operation, and a 28-lead SSOP package. It is appropriate for precision instrumentation, industrial measurement, communications receivers, and moderate-speed waveform acquisition where parallel data transfer is useful. Choose AD976ACRSZ when the same electrical configuration is required with the lead-free ordering option, after confirming the exact temperature grade and termination. Consider AD976AARSZ for another close SSOP ordering configuration, but validate its suffix-specific ordering details. Do not select the 100 kSPS AD976 when acquisition timing depends on twice its sampling rate. For designs requiring newer interfaces, different supply arrangements, or different package dimensions, evaluate a modern ADC rather than treating a functional alternative as a drop-in replacement. In every case, confirm the analog input range, reference implementation, clocking method, timing, thermal conditions, and acquisition logic against the manufacturer documentation.

Vergleich mit Alternativen

Parameter Dieses Produkt AD976ACRSZ AD976AARSZ
Package 28-lead SSOP 28-lead SSOP 28-lead SSOP
Brand Analog Devices Analog Devices Analog Devices
Resolution 16 bits 16 bits 16 bits
Throughput Rate 200 kSPS 200 kSPS 200 kSPS
Supply Voltage 5 V 5 V 5 V
Input Range 0 V to 5 V 0 V to 5 V 0 V to 5 V
Reference Internal or external 2.5 V Internal or external 2.5 V Internal or external 2.5 V
Output Interface High-speed parallel High-speed parallel High-speed parallel
Maximum Power Dissipation 100 mW 100 mW 100 mW

Wichtigste Unterscheidungsmerkmale

  • Doubles the acquisition rate of the original AD976 (vs. AD976)
  • Maintains the same 28-lead SSOP footprint for close replacement (vs. AD976ACRSZ)
  • Supports deterministic parallel data transfer (vs. AD976AARSZ)

Designhinweise

Follow the Analog Devices AD976/AD976A datasheet layout guidance when placing decoupling, reference, analog-input, clock, and parallel-output connections. Keep analog input routing short and place the input network near the converter to minimize added noise and susceptibility to digital coupling. The 16-bit parallel bus occupies 28-lead SSOP routing resources, so escape it cleanly toward the acquisition logic without introducing long stubs.

Do not substitute the 100 kSPS AD976 for AD976ACRS when the acquisition timing depends on the AD976A family's 200 kSPS throughput. Likewise, distinguish AD976ACRS from AD976ACRSZ by checking package, temperature grade, and lead-free ordering requirements. Use the manufacturer ordering table and pin-description table before releasing a PCB or production BOM.

Decouple the single 5 V supply close to the converter and follow the manufacturer component values and return-path arrangement. Maximum power dissipation is 100 mW, but board-level thermal performance depends on copper area, airflow, and the ambient environment. Use the datasheet power-dissipation equation with the final input voltage, output activity, and ambient temperature before defining the thermal margin.

Treat the 16-bit parallel output as a synchronous digital bus and analyze acquisition timing against the converter's clock and output timing. Keep the output traces short enough to limit propagation delay and loading effects, and account for setup and hold requirements at the receiving device. For higher-speed system architectures, use the manufacturer timing diagrams to determine whether registered capture logic is required.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The AD976ACRS ordering suffix and compliance declarations must be confirmed against the current Analog Devices product documentation. The device is an industrial analog converter and is not identified as an AEC-Q100-qualified automotive part.

Daten verifiziert am: 2026-11-19 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

AD976ACRS datasheet AD976ACRS pinout AD976ACRS datasheet pdf AD976ACRS specifications AD976ACRS equivalent AD976ACRS replacement AD976ACRS cross reference AD976ACRS price AD976ACRS stock Analog Devices AD976ACRS AD976ACRS vs AD976 AD976A 28 pin SSOP ADC AD976A 200 kSPS application circuit

Verwandte Bauteile & Begriffe

Analog Devices AD976ACRS AD976ACRSZ AD976AARSZ AD976A AD976 analog-to-digital converter ADC successive-approximation ADC switched-capacitor architecture BiCMOS parallel output interface on-chip clock 2.5 V reference single 5 V supply 16-bit resolution 200 kSPS throughput 28-lead SSOP SSOP package family surface-mount package industrial process measurement digital instrumentation waveform acquisition communications receiver
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen