AD9847KST - 10-Bit 40 MSPS CCD Processor | Analog Devices
Teilenummer: AD9847KST ✗ AbgekündigtAD9847KST Übersicht
A CCD signal processor is an imaging IC that conditions analog pixel charges and converts them into digital words while also generating the multi-phase clocking required by the image sensor. In the hierarchy of semiconductor components, the AD9847 belongs to the CCD signal processor and sensor-interface class, which is part of the broader analog front end and integrated-circuit category. Its integrated architecture reduces interconnections between the CCD output, converter, and timing circuitry while simplifying system-level image acquisition.
Principal features include 10-bit quantization, a maximum conversion rate of 40 MSPS, operation from 3 V or 5 V, and programmable timing control with approximately 500 ps adjustment resolution. The timing-driver capability allows the sensor clock phases to be positioned accurately enough for high-speed pixel-transfer operations. The consolidated signal chain also reduces the number of external components required around a CCD output stage.
Technically, the AD9847 divides the imaging interface into three closely coupled functions: analog CCD-signal conditioning, 10-bit digital conversion, and programmable timing generation. The approximately 500 ps timing resolution supports precise control of high-speed clocks at 40 MHz. This integration is especially useful when the design must transfer successive image rows while maintaining repeatable timing relationships between the sensor and sampling circuitry.
Typical applications include digital still cameras, CCD-based imaging modules, industrial optical inspection systems, scientific cameras, and embedded vision equipment. In each case, the integrated timing driver can simplify clock generation while the 10-bit, 40 MSPS conversion path captures rapidly arriving analog pixel signals. Designers should still verify sensor timing, voltage levels, and output-noise requirements against the individual CCD and system requirements.
For layout, keep analog input routing compact and place decoupling capacitors close to the supply pins. Treat the AD9847 timing outputs and analog input section as sensitive high-speed paths, with impedance-controlled routing and a quiet return path. Verify the final clock sequence, converter timing, and sensor voltage levels on hardware rather than relying only on nominal timing values.
This page consolidates the manufacturer's key AD9847 specifications, application guidance, sourcing information, and replacement constraints into a design-focused reference. It also distinguishes documented device characteristics from parameters that require confirmation in the manufacturer datasheet, helping engineers plan CCD front-end development without relying on isolated distributor summaries.
Drop-in-Alternativen für AD9847KST – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernAD9847KST Grenzwerte & elektrische Eigenschaften
| Product Type | 10-bit CCD signal processor with integrated timing driver |
| ADC Resolution | 10 bit |
| Maximum Sampling Rate | 40 MSPS |
| Versorgungsspannung | 3 V or 5 V |
| Timing Adjustment Resolution | approximately 500 ps |
| Timing Clock Frequency | up to 40 MHz |
| Signal Processing Architecture | complete analog front end, A/D conversion, and programmable timing driver |
| Primary Application | digital still camera CCD imaging |
| Analog Front End | integrated |
| Programmable Timing Driver | integrated |
AD9847KST standard Pinbelegungsleitfaden
Pinbelegung für AD9847KST (standard-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für AD9847KST.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
AD9847KST ist geeignet für 6 Anwendungs: Digital Still Cameras, Industrial Vision Systems, Scientific CCD Cameras, Machine Inspection Cameras, Optical Measurement Equipment, Embedded Vision Modules.
Digital Still Cameras
The AD9847KST is designed for digital still-camera CCD signal chains because it combines 10-bit conversion, a maximum sampling rate of 40 MSPS, and programmable timing generation in one device. Its analog front end processes the CCD output while the timing driver coordinates clock phases with approximately 500 ps adjustment resolution at speeds up to 40 MHz. This integration reduces the number of connections between the sensor, converter, and clock circuitry while supporting repeatable pixel acquisition. A camera designer should still match the device's analog input range, timing waveform, supply rail, and output interface to the selected CCD before releasing the layout.
Industrial Vision Systems
AD9847KST can support compact industrial vision systems that use a compatible CCD and sample image data at up to 40 MSPS. The integrated analog front end reduces the board area devoted to signal conditioning, while the programmable timing driver supports accurate coordination of image-transfer and conversion phases. The approximately 500 ps timing adjustment at clock speeds up to 40 MHz is useful when production-line cameras need repeatable timing across repeated exposures. Integration alone does not guarantee imaging performance: input bandwidth, sensor amplitude, clock levels, board return paths, and thermal conditions must be validated in the complete camera chain.
Scientific CCD Cameras
The AD9847KST fits scientific-camera front ends requiring a dedicated 10-bit CCD sampling path with controlled clock timing. Its integrated timing driver can establish repeatable phase relationships between CCD charge transfer and analog-to-digital sampling, while the 40 MSPS conversion capability supports rapidly delivered pixel bursts. For laboratory instruments, system timing margin is critical because sensor noise, clock jitter, and sampling aperture errors can affect measurement accuracy. Verify the converter's published noise, linearity, input bandwidth, and timing characteristics against the scientific imaging specification, then validate channel-to-channel performance on the assembled analog layout.
Machine Inspection Cameras
AD9847KST is applicable to machine-vision cameras that acquire images from CCD sensors during repetitive inspection cycles. The 10-bit quantization provides a practical balance between image data and interface complexity, while the integrated timing driver reduces the number of external clock-generation connections around the image sensor. At clock speeds up to 40 MHz, the approximately 500 ps adjustment resolution helps maintain controlled phase timing between sensor output and conversion. Inspection-system designers should also consider exposure timing, sensor charge-transfer behavior, analog input range, and downstream storage bandwidth so that the acquisition IC does not become the limiting element.
Optical Measurement Equipment
AD9847KST can be used in CCD-based optical measurement instruments where repeatable charge-transfer and sampling timing are required. The programmable timing core, with approximately 500 ps resolution at clock speeds up to 40 MHz, allows phase relationships to be adjusted within the CCD acquisition interface. The integrated analog front end and 10-bit, 40 MSPS converter reduce assembly complexity compared with separate timing and conversion stages. For quantitative instruments, verify input noise, differential nonlinearity, integral nonlinearity, and channel timing directly against the manufacturer's electrical characteristics. Precision in the timing generator does not by itself compensate for unsuitable sensor noise or poorly controlled analog layout.
Embedded Vision Modules
AD9847KST can serve as the image-acquisition IC in a compact embedded-vision module built around a compatible CCD sensor. Combining analog conditioning, 10-bit A/D conversion, and programmable timing in one package simplifies the signal path from CCD output to digital processing. Its 40 MSPS maximum rate supports higher-frame-rate acquisition than slower serial-interface sensors, provided the parallel data path and downstream processor can consume the resulting throughput. Power and thermal design should account for the complete camera board because this legacy imaging IC may be supplied in a different package or temperature grade than newer system-on-chip sensors.
Technische Referenzdaten für AD9847KST – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt |
|---|---|
| Product Type | 10-bit CCD signal processor with integrated timing driver |
| ADC Resolution | 10 bit |
| Maximum Sampling Rate | 40 MSPS |
| Supply Voltage | 3 V or 5 V |
| Timing Resolution | approximately 500 ps |
| Timing Clock Frequency | up to 40 MHz |
| Brand | Analog Devices |
| Analog Front End | Integrated |
| Primary Application | Digital still camera CCD imaging |
Designhinweise
Route the CCD analog output toward the AD9847 input pins with short, controlled-impedance traces and avoid crossing digital clock paths on adjacent layers. Keep the analog return path continuous beneath or immediately beside the signal route, and place the device's supply bypass capacitors close to their specified pins. The AD9847 combines analog conversion and programmable timing, so clock coupling into the CCD input path can affect image quality even when the digital data interface operates correctly.
Treat each phase of the programmable timing outputs as a high-speed clock signal and verify edge rate, amplitude, and timing margin at the CCD connection. The manufacturer identifies approximately 500 ps adjustment resolution at clock speeds up to 40 MHz, which supports precise phase placement but does not eliminate board-level skew. Match trace lengths where the CCD timing specification depends on symmetrical delays, and keep clock-routing geometry separate from the analog input and reference return paths.
Do not treat AD9849AKSTZ, another AD9847 ordering code, or a CCD signal processor with a similar package name as an automatic substitution. Confirm the complete package pinout, analog input range, clock-output arrangement, converter resolution, sampling rate, and supply sequencing requirements. For legacy production, also verify operating-temperature markings, traceability, and any manufacturer-specific ordering conditions before releasing the substitute into the assembly.
Compliance-Informationen
The AD9847 product information confirms an integrated CCD signal processor and timing driver. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements require confirmation from the manufacturer.