Analog Devices

AD9847KST - 10-Bit 40 MSPS CCD Processor | Analog Devices

MPN: AD9847KST ✗ Cuối đời
3 V or 5 V Vdss up to 40 MHz Speed
MOQ: 1 |

AD9847KST Tóm tắt

The Analog Devices AD9847KST is a 10-bit, 40 MSPS CCD signal processor with an integrated programmable timing driver, operating from a 3 V or 5 V supply. It combines a complete analog front end and A/D conversion path for digital still-camera CCD imaging, with timing-clock adjustment at approximately 500 ps resolution. The device integrates the functions normally distributed across a CCD output amplifier, analog-to-digital converter, and external timing generator.

A CCD signal processor is an imaging IC that conditions analog pixel charges and converts them into digital words while also generating the multi-phase clocking required by the image sensor. In the hierarchy of semiconductor components, the AD9847 belongs to the CCD signal processor and sensor-interface class, which is part of the broader analog front end and integrated-circuit category. Its integrated architecture reduces interconnections between the CCD output, converter, and timing circuitry while simplifying system-level image acquisition.

Principal features include 10-bit quantization, a maximum conversion rate of 40 MSPS, operation from 3 V or 5 V, and programmable timing control with approximately 500 ps adjustment resolution. The timing-driver capability allows the sensor clock phases to be positioned accurately enough for high-speed pixel-transfer operations. The consolidated signal chain also reduces the number of external components required around a CCD output stage.

Technically, the AD9847 divides the imaging interface into three closely coupled functions: analog CCD-signal conditioning, 10-bit digital conversion, and programmable timing generation. The approximately 500 ps timing resolution supports precise control of high-speed clocks at 40 MHz. This integration is especially useful when the design must transfer successive image rows while maintaining repeatable timing relationships between the sensor and sampling circuitry.

Typical applications include digital still cameras, CCD-based imaging modules, industrial optical inspection systems, scientific cameras, and embedded vision equipment. In each case, the integrated timing driver can simplify clock generation while the 10-bit, 40 MSPS conversion path captures rapidly arriving analog pixel signals. Designers should still verify sensor timing, voltage levels, and output-noise requirements against the individual CCD and system requirements.

For layout, keep analog input routing compact and place decoupling capacitors close to the supply pins. Treat the AD9847 timing outputs and analog input section as sensitive high-speed paths, with impedance-controlled routing and a quiet return path. Verify the final clock sequence, converter timing, and sensor voltage levels on hardware rather than relying only on nominal timing values.

This page consolidates the manufacturer's key AD9847 specifications, application guidance, sourcing information, and replacement constraints into a design-focused reference. It also distinguishes documented device characteristics from parameters that require confirmation in the manufacturer datasheet, helping engineers plan CCD front-end development without relying on isolated distributor summaries.

Bộ thay thế dễ dàng lắp đặt cho AD9847KST — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

AD9847KST Tỷ lệ tối đa & tính chất điện

Product Type 10-bit CCD signal processor with integrated timing driver
ADC Resolution 10 bit
Maximum Sampling Rate 40 MSPS
Điện áp cung cấp 3 V or 5 V
Timing Adjustment Resolution approximately 500 ps
Timing Clock Frequency up to 40 MHz
Signal Processing Architecture complete analog front end, A/D conversion, and programmable timing driver
Primary Application digital still camera CCD imaging
Analog Front End integrated
Programmable Timing Driver integrated

Hướng dẫn cấu hình chân AD9847KST standard

Cấu hình chân cho AD9847KST (standard gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân standard cho AD9847KST

Không có dữ liệu chân cụ thể sẵn có cho AD9847KST.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

AD9847KST phù hợp cho 6 Áp dụngs: Digital Still Cameras, Industrial Vision Systems, Scientific CCD Cameras, Machine Inspection Cameras, Optical Measurement Equipment, Embedded Vision Modules.

📷

Digital Still Cameras

The AD9847KST is designed for digital still-camera CCD signal chains because it combines 10-bit conversion, a maximum sampling rate of 40 MSPS, and programmable timing generation in one device. Its analog front end processes the CCD output while the timing driver coordinates clock phases with approximately 500 ps adjustment resolution at speeds up to 40 MHz. This integration reduces the number of connections between the sensor, converter, and clock circuitry while supporting repeatable pixel acquisition. A camera designer should still match the device's analog input range, timing waveform, supply rail, and output interface to the selected CCD before releasing the layout.

🏭

Industrial Vision Systems

AD9847KST can support compact industrial vision systems that use a compatible CCD and sample image data at up to 40 MSPS. The integrated analog front end reduces the board area devoted to signal conditioning, while the programmable timing driver supports accurate coordination of image-transfer and conversion phases. The approximately 500 ps timing adjustment at clock speeds up to 40 MHz is useful when production-line cameras need repeatable timing across repeated exposures. Integration alone does not guarantee imaging performance: input bandwidth, sensor amplitude, clock levels, board return paths, and thermal conditions must be validated in the complete camera chain.

🔬

Scientific CCD Cameras

The AD9847KST fits scientific-camera front ends requiring a dedicated 10-bit CCD sampling path with controlled clock timing. Its integrated timing driver can establish repeatable phase relationships between CCD charge transfer and analog-to-digital sampling, while the 40 MSPS conversion capability supports rapidly delivered pixel bursts. For laboratory instruments, system timing margin is critical because sensor noise, clock jitter, and sampling aperture errors can affect measurement accuracy. Verify the converter's published noise, linearity, input bandwidth, and timing characteristics against the scientific imaging specification, then validate channel-to-channel performance on the assembled analog layout.

🤖

Machine Inspection Cameras

AD9847KST is applicable to machine-vision cameras that acquire images from CCD sensors during repetitive inspection cycles. The 10-bit quantization provides a practical balance between image data and interface complexity, while the integrated timing driver reduces the number of external clock-generation connections around the image sensor. At clock speeds up to 40 MHz, the approximately 500 ps adjustment resolution helps maintain controlled phase timing between sensor output and conversion. Inspection-system designers should also consider exposure timing, sensor charge-transfer behavior, analog input range, and downstream storage bandwidth so that the acquisition IC does not become the limiting element.

📊

Optical Measurement Equipment

AD9847KST can be used in CCD-based optical measurement instruments where repeatable charge-transfer and sampling timing are required. The programmable timing core, with approximately 500 ps resolution at clock speeds up to 40 MHz, allows phase relationships to be adjusted within the CCD acquisition interface. The integrated analog front end and 10-bit, 40 MSPS converter reduce assembly complexity compared with separate timing and conversion stages. For quantitative instruments, verify input noise, differential nonlinearity, integral nonlinearity, and channel timing directly against the manufacturer's electrical characteristics. Precision in the timing generator does not by itself compensate for unsuitable sensor noise or poorly controlled analog layout.

🧩

Embedded Vision Modules

AD9847KST can serve as the image-acquisition IC in a compact embedded-vision module built around a compatible CCD sensor. Combining analog conditioning, 10-bit A/D conversion, and programmable timing in one package simplifies the signal path from CCD output to digital processing. Its 40 MSPS maximum rate supports higher-frame-rate acquisition than slower serial-interface sensors, provided the parallel data path and downstream processor can consume the resulting throughput. Power and thermal design should account for the complete camera board because this legacy imaging IC may be supplied in a different package or temperature grade than newer system-on-chip sensors.

What is the AD9847KST?
The AD9847KST is a 10-bit, 40 MSPS CCD signal processor with an integrated timing driver. According to the Analog Devices manufacturer datasheet, it combines a complete analog front end, A/D conversion, and programmable timing generation for digital still-camera CCD imaging. Its timing core provides approximately 500 ps clock-adjustment resolution at clock speeds up to 40 MHz, reducing the external circuitry required to synchronize the sensor and converter.
What are the key specifications of AD9847KST that engineers should know?
The AD9847KST provides 10-bit conversion, a maximum sampling rate of 40 MSPS, and operation from a 3 V or 5 V supply. The Analog Devices manufacturer datasheet also identifies an integrated analog front end, programmable timing driver, and approximately 500 ps timing resolution at clocks up to 40 MHz. These figures make the device suitable for CCD imaging systems that require accurate pixel sampling and multi-phase timing control in one integrated component.
What is the operating voltage of AD9847KST?
The AD9847KST operates from a 3 V or 5 V supply. According to the Analog Devices manufacturer datasheet, the integrated CCD signal processor and timing driver are designed for low-voltage digital imaging systems. The selected supply rail should be matched to the external CCD, clock-generation requirements, and board-level signal levels rather than selected solely from the converter's operating range.
Where can I download the AD9847KST datasheet PDF?
The official AD9847 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9847.pdf. The document covers the analog front end, A/D converter, programmable timing driver, electrical characteristics, timing diagrams, and application information. Use the pin-description table in that document when assigning signals and the timing diagrams when configuring the external CCD.
Where can I find the AD9847KST pinout?
The AD9847KST pin assignment is found in the pin-description table of the Analog Devices manufacturer datasheet. The distributor search information identifies the device as a 10-bit, 40 MSPS CCD signal processor, but it does not publish a complete pin-number mapping. Use the official pin-description table and package drawing to connect supplies, analog inputs, digital outputs, control signals, and timing-driver outputs without inferring connections from similarly named devices.
What is the AD9847KST used for in digital cameras?
The AD9847KST is used to condition and digitize analog CCD pixel signals while generating the sensor's programmable timing clocks. The Analog Devices manufacturer datasheet identifies digital still cameras as its primary application and specifies 10-bit conversion at up to 40 MSPS. Integrating the analog front end, converter, and timing driver reduces external interconnections and simplifies synchronization between the CCD and image-acquisition electronics.
Can AD9847KST be used in industrial vision or inspection systems?
Yes, AD9847KST can be used in industrial vision systems that employ a compatible CCD and require a 10-bit sampling path operating at up to 40 MSPS. Its integrated programmable timing driver offers approximately 500 ps adjustment resolution at clock speeds up to 40 MHz. Confirm sensor polarity, analog input range, timing sequence, and supply requirements in the manufacturer datasheet before adapting the device outside its digital still-camera origin.
What is the timing resolution of AD9847KST?
The AD9847KST timing core provides approximately 500 ps adjustment resolution for high-speed clocks up to 40 MHz. According to the Analog Devices manufacturer datasheet, this programmable timing capability is combined with the 10-bit, 40 MSPS signal processor. The timing resolution is important because pixel-transfer phases must be positioned consistently relative to the CCD output and the A/D sampling instant.
Is AD9847KST suitable for scientific or industrial CCD cameras?
AD9847KST is suitable when the CCD interface and acquisition requirements fall within its 10-bit, 40 MSPS capabilities. The approximately 500 ps timing resolution and integrated clock driver can simplify scientific-camera and industrial-inspection front ends. Suitability still depends on the CCD's output amplitude, timing waveform, noise target, and power budget, all of which should be checked against the manufacturer datasheet.
When should I choose AD9847KST over a discrete CCD front end?
Choose AD9847KST when the design benefits from integrating CCD signal conditioning, 10-bit A/D conversion, and programmable timing generation into one device. The integrated approach can reduce external interconnections and simplify timing coordination compared with a discrete front end. Retain a discrete approach when the CCD interface, converter performance, clock architecture, or supply requirements exceed the AD9847's published operating envelope.
What can replace AD9847KST?
No validated pin-to-pin drop-in replacement for AD9847KST was established from the available manufacturer and cross-reference information. A replacement must preserve the package, pinout, 10-bit conversion rate, CCD analog interface, programmable timing outputs, and 3 V or 5 V operation. Tape-and-reel ordering codes and broader CCD signal processors should not be treated as drop-in substitutes without a documented pin and timing comparison.
Is AD9847KST the same as AD9849AKSTZ?
No, AD9847KST and AD9849AKSTZ are not established as interchangeable drop-in parts. The verified comparison identifies AD9849AKSTZ as a related device, while the manufacturer information describes AD9847KST as a 10-bit, 40 MSPS CCD signal processor. Because converter resolution, conversion rate, package details, and timing behavior may differ, the AD9849 must not replace the AD9847 without a complete pinout and system-timing review.
AD9847KST vs AD9849AKSTZ: which is better for a CCD camera?
AD9847KST is the better choice when the system specifically requires the documented 10-bit, 40 MSPS AD9847 CCD signal-processor interface. AD9849AKSTZ may suit a different CCD acquisition architecture, but it cannot be assumed to be a drop-in replacement. Compare analog input range, clock outputs, digital interface, resolution, sampling rate, power requirements, and package pin assignments before selecting either device for a new design.
Is AD9847KST the best drop-in replacement for an original AD9847?
AD9847KST is itself an ordering code for the AD9847 family, so it may serve as the correct source designation for an original AD9847 assembly when the package, temperature range, and qualification requirements match. It is not appropriate to present a reel-code variant or a different CCD processor as a universal drop-in replacement. Verify the original manufacturer markings and all suffix-dependent requirements before substitution.
Where can I buy AD9847KST and what is its price?
Use the Request a Quote form on this page to request AD9847KST pricing, stock, and lead time. Quote requests provide the exact ordering code and supply conditions needed for a current commercial response. The AD9847 is an older CCD signal-processor product, so lifecycle availability and traceability requirements should be confirmed before committing a new production design to it.
What is the lead time and stock status for AD9847KST?
Request current AD9847KST stock, minimum order quantity, and lead time through the Request a Quote form on this page. The manufacturer product page identifies AD9847 as an older CCD signal processor, while distributor search results reflect changing inventory from different channels. A quote response should state the exact MPN, package condition, traceability, quantity, and delivery schedule for the proposed order.
What is the lifecycle status of AD9847KST?
AD9847KST is classified as obsolete for this product record because the manufacturer documentation dates from the original AD9847 generation. According to the Analog Devices manufacturer page and datasheet, the device was introduced for 10-bit, 40 MSPS CCD imaging systems. New designs should confirm lifecycle status with the manufacturer, while existing industrial or scientific systems may still require sourced legacy inventory.

Dữ liệu tham khảo kỹ thuật cho AD9847KST — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose AD9847KST when the system specifically uses a compatible CCD interface requiring a 10-bit, 40 MSPS signal processor with an integrated programmable timing driver and 3 V or 5 V operation. The approximately 500 ps timing resolution at clock speeds up to 40 MHz is particularly useful for coordinating CCD transfer phases with conversion timing. The device is most appropriate for legacy digital-camera, industrial-vision, or scientific-imaging designs whose electrical interface matches the original AD9847 implementation. No pin-to-pin substitute was established because equivalent CCD processors must match the analog front end, timing outputs, digital interface, package, and operating requirements simultaneously. For new cameras, compare it with current CCD signal processors on image quality, clocking, power, software interface, availability, and long-term lifecycle support. For an existing AD9847 board, retain the original ordering code unless the manufacturer confirms that the exact suffix supplies every required electrical, temperature, and qualification condition.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Product Type 10-bit CCD signal processor with integrated timing driver
ADC Resolution 10 bit
Maximum Sampling Rate 40 MSPS
Supply Voltage 3 V or 5 V
Timing Resolution approximately 500 ps
Timing Clock Frequency up to 40 MHz
Brand Analog Devices
Analog Front End Integrated
Primary Application Digital still camera CCD imaging

Ghi chú thiết kế

Route the CCD analog output toward the AD9847 input pins with short, controlled-impedance traces and avoid crossing digital clock paths on adjacent layers. Keep the analog return path continuous beneath or immediately beside the signal route, and place the device's supply bypass capacitors close to their specified pins. The AD9847 combines analog conversion and programmable timing, so clock coupling into the CCD input path can affect image quality even when the digital data interface operates correctly.

Treat each phase of the programmable timing outputs as a high-speed clock signal and verify edge rate, amplitude, and timing margin at the CCD connection. The manufacturer identifies approximately 500 ps adjustment resolution at clock speeds up to 40 MHz, which supports precise phase placement but does not eliminate board-level skew. Match trace lengths where the CCD timing specification depends on symmetrical delays, and keep clock-routing geometry separate from the analog input and reference return paths.

Do not treat AD9849AKSTZ, another AD9847 ordering code, or a CCD signal processor with a similar package name as an automatic substitution. Confirm the complete package pinout, analog input range, clock-output arrangement, converter resolution, sampling rate, and supply sequencing requirements. For legacy production, also verify operating-temperature markings, traceability, and any manufacturer-specific ordering conditions before releasing the substitute into the assembly.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The AD9847 product information confirms an integrated CCD signal processor and timing driver. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements require confirmation from the manufacturer.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

AD9847KST datasheet AD9847KST datasheet pdf AD9847KST pinout AD9847KST specifications AD9847KST equivalent AD9847KST replacement AD9847KST cross reference AD9847KST footprint AD9847KST price AD9847KST stock Analog Devices AD9847KST AD9847 10-bit 40 MSPS CCD processor AD9847KST digital still camera AD9847KST vs AD9849AKSTZ

Các bộ phận và thuật ngữ liên quan

Analog Devices AD9847KST AD9847 AD9849AKSTZ CCD signal processor sensor interface IC analog front end A/D converter 10-bit ADC 40 MSPS programmable timing driver Precision Timing core 500 ps timing resolution 40 MHz clock digital still camera industrial vision system scientific CCD camera machine inspection camera optical measurement equipment embedded vision module 3 V supply 5 V supply RoHS REACH legacy semiconductor
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ