ADA4522-2ARZ-RL7 - Dual 55V Zero-Drift Op Amp | Analog Devices
Teilenummer: ADA4522-2ARZ-RL7 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $3.42 | $3,42 |
| 10 | $3.08 | $30,80 |
| 100 | $2.74 | $274,00 |
| 500 | $2.47 | $1.235,00 |
| 1.000 | $2.19 | $2.190,00 |
ADA4522-2ARZ-RL7 Übersicht
Zero-drift amplifiers, also known as chopper-stabilized or auto-zero amplifiers, are a class of operational amplifiers that continuously correct their input offset voltage and drift, achieving near-zero offset and extremely low offset drift over temperature and time. This makes them ideal for precision signal conditioning, sensor interfaces, and instrumentation where accuracy is paramount. The ADA4522-2 belongs to the family of zero-drift op amps, which are a subset of precision operational amplifiers, which in turn fall under the broader category of linear integrated circuits.
Key features of the ADA4522-2 include a maximum offset voltage of 5 µV, an extremely low offset voltage drift of 22 nV/°C, and a low voltage noise density of 5.8 nV/√Hz typical. The input bias current is only 50 pA typical, and the device provides 117 nV p-p typical noise from 0.1 Hz to 10 Hz. The amplifier also features on-chip EMI filtering, achieving high immunity to electromagnetic interference, and is fully specified over the extended industrial temperature range.
The ADA4522-2 uses a proprietary zero-drift architecture that combines a precision CMOS input stage with a chopper stabilization technique. This results in excellent DC accuracy and low noise, making it suitable for high-resolution data acquisition systems, precision current sensing, and bridge amplifiers. The rail-to-rail output stage allows maximum dynamic range, and the ground-sensing inputs enable true single-supply operation.
Typical applications include precision instrumentation, medical devices, industrial process control, and automotive sensor interfaces. The wide supply voltage range and low noise make it particularly well-suited for battery-powered and high-voltage systems. The device is also available in single (ADA4522-1) and quad (ADA4522-4) versions, providing design flexibility.
When designing with the ADA4522-2, it is important to provide proper decoupling on the power supply pins and to consider the effects of input bias current on high-impedance sources. The device's low offset and drift eliminate the need for external trimming in most applications, simplifying the design and improving long-term reliability.
Drop-in-Alternativen für ADA4522-2ARZ-RL7 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ADA4522-2ARZ-RL7 (gleiche Bauform und Footprint) – abweichend in Package, Amplifier Type, Operating Temperature Range, RoHS Status, Supply Voltage Range.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
ADA4522-2ARZ
✅ Drop-In✓ Auf Lager
$3.9 / Stück
Datenblatt ansehen →ADA4522-2ARZ-R7
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADA4522-1ARZ
✅ Drop-In✓ Auf Lager
$1.42 / Stück
Datenblatt ansehen →OPA2189
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
LTC2057
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
AD8628ARZ
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$1.49 / Stück
Datenblatt ansehen →ADA4522-2ARZ-RL7 Grenzwerte & elektrische Eigenschaften
| Number of Channels | 2 |
| Supply Voltage Range | 4.5 V to 55 V |
| Supply Voltage Range (Dual) | ±2.25 V to ±27.5 V |
| Offset Voltage (Max) | 5 µV |
| Offset Voltage Drift (Max) | 22 nV/°C |
| Voltage Noise Density (Typ) | 5.8 nV/√Hz |
| Input Bias Current (Typ) | 50 pA |
| Noise (0.1 Hz to 10 Hz) | 117 nV p-p typical |
| Ausgangstyp | Rail-to-Rail |
| Input Type | Ground-Sensing |
| EMI Immunity | Enhanced (on-chip filtering) |
| Betriebstemperaturbereich | -40°C to +125°C |
| Gehäuse | 8-Lead SOIC (SOIC-8) |
| Montageart | Surface Mount |
| Amplifier Type | Zero-Drift |
ADA4522-2ARZ-RL7 Pin-Konfiguration
| Pin 1 | OUT A — Output of amplifier A |
| Pin 2 | -IN A — Inverting input of amplifier A |
| Pin 3 | +IN A — Non-inverting input of amplifier A |
| Pin 4 | V- — Negative supply (or ground in single-supply operation) |
| Pin 5 | +IN B — Non-inverting input of amplifier B |
| Pin 6 | -IN B — Inverting input of amplifier B |
| Pin 7 | OUT B — Output of amplifier B |
| Pin 8 | V+ — Positive supply |
Typische Anwendungen
ADA4522-2ARZ-RL7 ist geeignet für 6 Anwendungs: Precision Instrumentation, Medical Devices, Industrial Process Control, Automotive Sensor Interfaces, Test and Measurement, Energy Harvesting Systems.
Precision Instrumentation
The ADA4522-2ARZ-RL7's ultra-low offset voltage (5 µV max) and drift (22 nV/°C) make it ideal for precision instrumentation such as data acquisition systems, weigh scales, and bridge amplifiers. Its low noise (5.8 nV/√Hz) ensures accurate measurement of small signals, while the wide supply range (up to 55V) accommodates industrial sensor interfaces. The ground-sensing inputs allow true single-supply operation, simplifying design in battery-powered instruments.
Empfohlen
Medical Devices
In medical devices such as patient monitors and diagnostic equipment, the ADA4522-2ARZ-RL7 provides the accuracy and low noise required for biosignal amplification. Its low input bias current (50 pA) minimizes errors when interfacing with high-impedance electrodes, and the rail-to-rail output maximizes dynamic range for ADC interfaces. The extended temperature range (-40°C to +125°C) ensures reliable operation in clinical environments.
Empfohlen
Industrial Process Control
The ADA4522-2ARZ-RL7 is well-suited for industrial process control loops, where long-term stability and accuracy are critical. Its zero-drift architecture eliminates offset drift over temperature, reducing calibration requirements. The wide supply voltage (up to 55V) allows direct interfacing with 24V industrial buses, and the enhanced EMI immunity ensures reliable operation in noisy factory environments. The device can be used in PID controllers, valve positioners, and pressure transmitters.
Empfohlen
Automotive Sensor Interfaces
For automotive sensor interfaces, the ADA4522-2ARZ-RL7 offers the precision and robustness needed for applications like battery monitoring, motor control, and pressure sensing. Its wide supply range (up to 55V) handles automotive battery voltage transients, and the low offset drift ensures accurate measurement over the -40°C to +125°C temperature range. The ground-sensing inputs enable high-side and low-side current sensing without level shifting.
Empfohlen
Test and Measurement
In test and measurement equipment, the ADA4522-2ARZ-RL7 provides the accuracy and low noise required for high-resolution measurements. Its low offset and drift enable precise DC measurements, while the wide bandwidth and rail-to-rail output support AC signal conditioning. The device is ideal for use in digital multimeters, source measure units, and precision voltage references. The enhanced EMI immunity ensures accurate readings in electrically noisy environments.
Empfohlen
Energy Harvesting Systems
The ADA4522-2ARZ-RL7 is suitable for energy harvesting systems where low power consumption and high accuracy are essential. Its low quiescent current and wide supply range allow operation from variable energy sources such as solar cells and thermoelectric generators. The zero-drift architecture ensures accurate signal conditioning of small sensor outputs, and the rail-to-rail output maximizes the usable signal range for energy-efficient ADCs.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ADA4522-2ARZ-RL7 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ADA4522-2ARZ | ADA4522-2ARZ-R7 | OPA2189 | LTC2057 |
|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Analog Devices |
| Number of Channels | 2 | 2 | 2 | 2 | 2 |
| Supply Voltage Range | 4.5V to 55V | 4.5V to 55V | 4.5V to 55V | 4.5V to 36V | 4.75V to 36V |
| Offset Voltage (Max) | 5 µV | 5 µV | 5 µV | 4 µV | 0.5 µV |
| Offset Drift (Max) | 22 nV/°C | 22 nV/°C | 22 nV/°C | 0.04 µV/°C | 0.01 µV/°C |
| Voltage Noise Density | 5.8 nV/√Hz | 5.8 nV/√Hz | 5.8 nV/√Hz | 5.2 nV/√Hz | 7.5 nV/√Hz |
| Input Bias Current | 50 pA | 50 pA | 50 pA | 150 pA | 20 pA |
Wichtigste Unterscheidungsmerkmale
- Wide supply voltage range up to 55V (vs. OPA2189)
- Enhanced EMI immunity (vs. LTC2057)
- Ground-sensing inputs (vs. OPA2189)
Designhinweise
The ADA4522-2ARZ-RL7 operates from 4.5V to 55V. For best performance, use a low-noise power supply and place a 0.1µF ceramic capacitor close to each supply pin (V+ and V-). For single-supply operation, connect V- to ground and ensure the input common-mode range includes ground (ground-sensing inputs).
To minimize noise pickup, keep the input traces short and shielded. Use a solid ground plane under the device and avoid routing high-frequency digital signals near the inputs. The ADA4522-2 has enhanced EMI immunity, but proper layout still improves performance. Place decoupling capacitors as close as possible to the supply pins.
Do not exceed the absolute maximum supply voltage of 60V. Also, ensure the input voltages do not exceed the supply rails. The device has internal ESD protection, but external protection diodes may be needed for harsh environments. For high-impedance sources, consider the input bias current (50 pA) and use a guard ring if necessary.
Compliance-Informationen
RoHS compliant per Analog Devices product page. Not AEC-Q100 qualified. Lead-free finish.
