Analog Devices

ADF4110BRUZ-RL7 - 550MHz Integer-N PLL | Analog Devices

Teilenummer: ADF4110BRUZ-RL7 ✓ Aktiv
16-TSSOP, 4.40 mm width Package 550 MHz Speed
MOQ: 1 |

ADF4110BRUZ-RL7 Übersicht

Analog Devices ADF4110BRUZ-RL7 is a single integer-N phase-locked loop frequency synthesizer with a maximum RF input frequency of 550 MHz, programmable reference and feedback counters, a programmable prescaler, and a phase-frequency detector. The device is packaged in a 16-lead TSSOP measuring 4.40 mm wide.

A PLL frequency synthesizer is a timing and frequency-control IC that locks an output frequency to a stable reference. Its hierarchy extends from RF clock and frequency synthesizer to phase-locked loop, clock-generation IC, and power-management-independent signal-chain device. The ADF4110 family supports wireless receiver and transmitter local oscillators by combining a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, 6-bit A counter, 13-bit B counter, and dual-modulus P/P+1 prescaler.

Key features include the 550 MHz maximum synthesizer frequency, integer-N architecture, programmable prescaler, programmable A and B counters, and a programmable reference divider. The charge-pump and phase-frequency detector support closed-loop frequency generation, while the counters establish the required multiplication ratio. These functions make the ADF4110 suitable for RF local-oscillator generation, modulation and demodulation systems, wireless transceiver tuning, and precision test equipment.

The ADF4110BRUZ-RL7 is identified as a production device by Analog Devices. Its 16-TSSOP package supports compact surface-mount layouts, although the relatively narrow package requires careful fanout from the fine-pitch leads. The suffix identifies the specific orderable package, temperature, and reel configuration; the manufacturer product page and family datasheet should be used for final manufacturing and lot-control requirements.

Typical applications include GSM and other wireless receiver local oscillators, wireless transmitter up-conversion and down-conversion paths, industrial RF test equipment, and instrumentation requiring programmable synthesized RF. In these systems, a crystal oscillator or TCXO can provide the reference signal, while the ADF4110 produces a programmable output locked to that reference for coherent mixing or channel selection.

PCB design should keep the reference, charge-pump, and RF feedback paths compact and away from noisy switching nodes. Confirm loop-filter component values, prescaler selection, counter limits, and allowable operating regions against the manufacturer datasheet before tuning. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks, and preserve the specified decoupling and grounding layout to minimize phase noise and spurious signals.

Drop-in-Alternativen für ADF4110BRUZ-RL7 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit ADF4110BRUZ-RL7 (gleiche Bauform und Footprint) – abweichend in Prescaler, Package, Product Type, A Counter, B Counter.

Analog Devices
Prescaler: Dual-modulus P/P + 1
Package: 16-lead TSSOP, 0.173 inch width, 4.40 mm width
Product Type: Integer-N PLL frequency synthesizer
Vergleichen mit ADF4110BRUZ-RL7 →
Analog Devices
Prescaler: Programmable
Package: 16-pin TSSOP
Vergleichen mit ADF4110BRUZ-RL7 →
Analog Devices
Prescaler: Programmable dual-modulus prescaler
Package: 16-lead TSSOP, 0.173 in (4.40 mm) width
A Counter: 6-bit
Vergleichen mit ADF4110BRUZ-RL7 →
Analog Devices
Prescaler: Programmable dual-modulus P/P+1 prescaler
Product Type: Single integer-N RF frequency synthesizer
Vergleichen mit ADF4110BRUZ-RL7 →
Analog Devices
Prescaler: Dual-modulus P/P+1
Package: 16-pin TSSOP
A Counter: Programmable
Vergleichen mit ADF4110BRUZ-RL7 →

ADF4111BRUZ-RL7

✅ Drop-In
Analog Devices
📦 16-TSSOP
Single, integer-N PLL frequency synthesizer · 1.4 GHz · 1.2 GHz · 1 · Integer-N · Programmable dual-modulus prescaler · 6-bit · 13-bit

Preis auf Anfrage

Datenblatt ansehen →

ADF4112BRUZ

✅ Drop-In
Analog Devices
📦 16-TSSOP
Single integer-N RF frequency synthesizer · 3 GHz · 2.7 V to 5.5 V · 3 V · 6.5 mA · Integer-N frequency synthesis · 1 channel · BiCMOS

Preis auf Anfrage

Datenblatt ansehen →

ADF4113BRUZ

✅ Drop-In
Analog Devices
📦 16-TSSOP
Single integer-N RF PLL frequency synthesizer · 4 GHz · Integer-N · 1 · 16-pin TSSOP · 4.40 mm · 0.173 inch · Surface mount

Preis auf Anfrage

Datenblatt ansehen →

ADF4116BRUZ-REEL7

✅ Drop-In
📦 16-TSSOP
Same 16-TSSOP family footprint; higher-family RF capability and register behavior differ from the 550 MHz target

📋 Referenzalternative (nicht im Katalog)

ADF4107BRU-REEL

✅ Drop-In
Analog Devices
📦 16-TSSOP
Integer-N PLL frequency synthesizer · 7 GHz · 1 GHz to 7 GHz · 6-bit programmable · 13-bit programmable · Dual-modulus P/P + 1 · Programmable · Precision charge pump

Preis auf Anfrage

Datenblatt ansehen →

ADF4110BRUZ-RL7 Technische Daten

Product Type Single integer-N RF PLL frequency synthesizer
Maximum RF Input Frequency 550 MHz
Architecture Integer-N phase-locked loop
Number of Channels 1 channel
A Counter Width 6 bits
B Counter Width 13 bits
Prescaler Programmable dual-modulus P/P+1
Reference Divider Programmable
Phase Detector Low-noise digital phase-frequency detector
Charge Pump Precision charge pump
Gehäuse 16-TSSOP, 4.40 mm width
Package Lead Width 0.173 inch
Betriebstemperatur -40 °C to +85 °C
Montageart Surface mount
Production Status Production

ADF4110BRUZ-RL7 0.173 inch Pinbelegungsleitfaden

Pinbelegung für ADF4110BRUZ-RL7 (0.173 inch-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für ADF4110BRUZ-RL7 im 0.173 inch-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ADF4110BRUZ-RL7.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ADF4110BRUZ-RL7 ist geeignet für 6 Anwendungs: Wireless Receiver Local Oscillator, Wireless Transmitter Frequency Generation, RF Test and Measurement Instrument, GSM Receiver Frequency Plan, Industrial RF Control and Monitoring, Frequency-Synchronized Instrumentation.

🌐

Wireless Receiver Local Oscillator

The ADF4110BRUZ-RL7 is suitable for generating a programmable local-oscillator signal in wireless receiver front ends. Its integer-N PLL combines a phase-frequency detector, precision charge pump, programmable reference divider, 6-bit A counter, 13-bit B counter, and dual-modulus prescaler to translate a stable reference into the required RF channel. The 550 MHz maximum input frequency defines the upper RF planning boundary. In an up-conversion or down-conversion path, the synthesized signal can drive a mixer while remaining phase-locked to the system reference. Designers should select the prescaler and counter values that satisfy the target channel plan, then validate lock range, reference spurs, and phase noise on the final reference and loop-filter implementation.

📡

Wireless Transmitter Frequency Generation

The ADF4110BRUZ-RL7 can provide the programmable frequency source required by wireless transmitter signal chains. Placing the PLL upstream of a mixer or up-conversion stage allows the carrier to be derived coherently from a shared reference rather than from an independent resonator. The device's 550 MHz maximum RF input frequency and programmable dual-modulus prescaler support integer-N channel planning, while the 6-bit A and 13-bit B counters establish the multiplication ratio. For transmitter designs, phase noise and reference spurs can affect modulation quality and adjacent-channel performance, so loop-filter tuning, reference-source isolation, PCB return paths, and conducted/radiated emissions must be evaluated together rather than relying on nominal register settings alone.

🖥️

RF Test and Measurement Instrument

The ADF4110BRUZ-RL7 is appropriate for programmable RF test equipment that requires an accurate synthesized source with multiple channel selections. A reference oscillator can feed the PLL, and the integer-N architecture can generate the local-oscillator frequency required by a receiver test, mixer test, or signal-generation block. The 550 MHz RF limit provides a clear boundary for test-plan planning, while the programmable reference divider and counters allow multiple division and multiplication ratios. Instrument designers should account for reference purity, loop bandwidth, calibration, and settling time. A representative implementation should use short RF feedback tracks, a compact loop filter, and a layout that prevents digital-control return current from coupling into the reference or prescaler nodes.

📱

GSM Receiver Frequency Plan

The ADF4110BRUZ-RL7 can support the programmable local oscillator required in GSM receiver architectures. The ADF4110 family documentation explicitly describes use in wireless receiver and transmitter local oscillators, and its programmable reference divider, counters, and dual-modulus prescaler allow a common reference to be translated into channel-specific RF frequencies. The target's 550 MHz maximum input frequency must be checked against every intermediate frequency and prescaler operating point in the receiver plan. Designers should also evaluate phase noise, lock time, reference spurs, and acquisition margin under the required temperature range. The family datasheet's reference-input and application guidance should form the basis of the PCB layout and component-selection review.

🏭

Industrial RF Control and Monitoring

The ADF4110BRUZ-RL7 can serve as the programmable RF element in an industrial monitoring or control system that performs coherent mixing, interrogation, or frequency-selective measurement. Its integer-N topology gives the controller a deterministic relationship between a stable reference and the selected RF output, while the programmable counters and prescaler support multiple operating channels. The 550 MHz maximum frequency should be treated as an upper RF constraint rather than a guarantee that every desired plan is achievable with one prescaler. Engineering validation should cover reference jitter, loop-filter behavior, output buffering, PCB isolation, and stable operation from -40 °C to +85 °C. Digital programming lines should be routed away from sensitive analog nodes to reduce coupling into the feedback divider.

🔧

Frequency-Synchronized Instrumentation

The ADF4110BRUZ-RL7 is useful in instrumentation that must derive multiple RF-related frequencies from one stable reference. A laboratory or industrial instrument can program the reference divider, A counter, B counter, and prescaler to establish a repeatable synthesis ratio, reducing reliance on separate free-running oscillators. Its 550 MHz RF input ceiling supports designs within that range, while the phase-frequency detector and precision charge pump establish the PLL's control loop. Practical implementation requires a reference source with adequate phase noise and low ripple, a carefully calculated loop filter, and controlled grounding around the feedback network. Engineers should measure phase noise, reference spurs, lock behavior, and temperature drift across the operating range before using the output for precision measurement.

What is the ADF4110BRUZ-RL7?
The ADF4110BRUZ-RL7 is a single-channel, integer-N RF PLL frequency synthesizer with a maximum input frequency of 550 MHz. According to the Analog Devices ADF4110 product page, it combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus P/P+1 prescaler. It is packaged in a 16-TSSOP and is intended primarily for wireless receiver and transmitter local-oscillator synthesis.
What are the key specifications of ADF4110BRUZ-RL7 that engineers should know?
The ADF4110BRUZ-RL7 combines a 550 MHz maximum RF input frequency with integer-N frequency synthesis and a 16-TSSOP package. Analog Devices identifies a programmable prescaler, programmable reference divider, 6-bit A counter, 13-bit B counter, low-noise digital phase-frequency detector, and precision charge pump as the core functional blocks. Its operating temperature range is -40 °C to +85 °C. These features determine loop-filter design, counter programming, and RF layout requirements.
What is the difference between ADF4110 and ADF4111?
The ADF4110BRUZ-RL7 is the 550 MHz member of the ADF4110 frequency-synthesizer family, while the ADF4111 is a different member of the same 16-TSSOP family. The manufacturer family documentation covers both devices, but the exact maximum operating frequencies, prescaler choices, and register differences must be checked before substituting them. For a frequency plan requiring the ADF4110's 550 MHz limit, use the ADF4110 unless the replacement has been validated against every required RF and lock-range condition.
When should I choose ADF4110BRUZ-RL7 over ADF4112BRUZ?
Choose ADF4110BRUZ-RL7 when the required RF plan is covered by its 550 MHz maximum input frequency and an integer-N architecture. ADF4112 is a related family member with potentially different RF limits and prescaler or counter capabilities, so it should be selected only when its frequency coverage and register programming exceed the ADF4110 requirement. The relevant engineering checks are maximum RF input, prescaler range, reference-divider range, counter limits, and loop bandwidth.
Can ADF4111BRUZ-RL7 replace ADF4110BRUZ-RL7?
ADF4111BRUZ-RL7 can be considered only after confirming device-specific frequency and register compatibility. Both belong to the Analog Devices ADF4110 family and use the 16-TSSOP package, but a common package alone does not guarantee identical prescaler ranges, operating limits, or programming behavior. Validate the intended reference frequency, target output frequency, prescaler value, counter sequence, lock behavior, and PCB footprint against the manufacturer data before approving the replacement.
What can replace ADF4110BRUZ-RL7?
The closest same-family candidates identified for review are ADF4111BRUZ-RL7, ADF4112BRUZ, ADF4113BRUZ, and ADF4116BRUZ-REEL7, all associated with the ADF4110 family or its 16-TSSOP variants. Replacement requires more than matching the 16-TSSOP footprint: the RF input limit, prescaler options, counter widths, reference handling, register map, and target frequency plan must align. Use the manufacturer family documentation to verify each substitution for the specific design.
What is the best Analog Devices equivalent for ADF4110BRUZ-RL7?
ADF4111BRUZ-RL7 is the closest same-brand family candidate for an engineering review because it appears in a direct comparison with the target and shares the ADF4110 family architecture. It should not be treated as an automatic substitute because maximum frequency, prescaler behavior, and programming details may differ. Confirm that its 16-TSSOP pinout, operating limits, and frequency plan satisfy the target circuit before releasing a replacement design.
Where can I download the ADF4110BRUZ-RL7 datasheet PDF?
Download the manufacturer ADF4110 family datasheet from the Analog Devices technical-documentation link on this page. The document is titled ADF4110_4111_4112_4113.pdf and covers the target device together with related family members. Use its pin-description table, electrical characteristics, application circuit, and reference-input guidance for board design. The Analog Devices product page provides the current production status and linked documentation.
Where can I find the ADF4110BRUZ-RL7 pinout?
The ADF4110BRUZ-RL7 pinout is found in the pin-description table of the Analog Devices ADF4110_4111_4112_4113 family datasheet. The package is a 16-TSSOP with a stated body width of 4.40 mm and lead width of 0.173 inch. Because this page does not reproduce every numbered terminal name, use the manufacturer table directly for PCB routing and verify the exposed package geometry and pin numbering against the selected footprint.
Where can I buy ADF4110BRUZ-RL7 online?
Use the Request a Quote form on this page to request ADF4110BRUZ-RL7 availability, quotation, and lead time from XAIPART. The form is the appropriate route for current commercial terms because pricing and inventory can change rapidly. Confirm the exact orderable MPN, reel configuration, quantity, and required lifecycle grade when submitting the request so the manufacturing quote matches the intended BOM item.
What is the price of ADF4110BRUZ-RL7?
Submit an ADF4110BRUZ-RL7 request through the Request a Quote form on this page for the current unit price and volume breaks. The quote should be tied to the exact MPN and requested quantities because reel packing, order volume, and market conditions affect commercial terms. Do not substitute an ADF4110BRUZ base-part quotation or another package suffix without confirming that the delivered part is exactly ADF4110BRUZ-RL7.
What is the lead time for ADF4110BRUZ-RL7?
Request the current lead time for ADF4110BRUZ-RL7 through the Request a Quote form on this page. Analog Devices lists the ADF4110 as a production family, but manufacturing availability can vary by exact suffix, quantity, and reel configuration. Include the required quantity and scheduled production date in the request so XAIPART can confirm a practical delivery commitment for the specific orderable device.
Is ADF4110BRUZ-RL7 in stock?
Request current stock status for ADF4110BRUZ-RL7 through the Request a Quote form on this page. The product is identified as a production Analog Devices device, but that status does not guarantee immediate availability of every orderable suffix. Provide the required quantity and packaging details in the request. XAIPART will confirm current inventory and the expected lead time for the exact MPN.
Does the ADF4110BRUZ-RL7 need a loop filter?
The ADF4110BRUZ-RL7 uses a charge-pump phase-locked loop and requires an external loop-filter network connected to the charge-pump and phase-detector path. Component values depend on the reference frequency, target output frequency, prescaler, phase detector gain, charge-pump current, and desired loop bandwidth. Start with the manufacturer's application guidance and then validate lock range, reference spurs, phase noise, and acquisition behavior on the final PCB.
How should the ADF4110BRUZ-RL7 be laid out for low phase noise?
Place the ADF4110BRUZ-RL7 reference and RF feedback connections as short as practical, keep the loop filter close to its associated pins, and provide a quiet ground return around sensitive high-frequency nodes. Route high-energy switching and digital signals away from the reference input, prescaler output, and feedback divider. Preserve the reference and decoupling layout shown in the manufacturer application guidance, and evaluate the assembled board for periodic spurs before finalizing channel spacing.

Technische Referenzdaten für ADF4110BRUZ-RL7 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose ADF4110BRUZ-RL7 when the RF frequency plan requires a 550 MHz maximum input frequency and an integer-N PLL with programmable reference division, prescaler, 6-bit A counter, and 13-bit B counter. It is well suited to wireless local oscillators, receiver and transmitter signal chains, and programmable RF test equipment. Consider ADF4111BRUZ-RL7 or ADF4112BRUZ only after checking their frequency ceilings, prescaler ranges, and register behavior. ADF4113BRUZ and ADF4116BRUZ-REEL7 may be useful when their additional family-specific capabilities satisfy the design, but their exact electrical differences must be reviewed. ADF4107BRU-REEL is a separate related PLL family member and should be selected only when its RF range and programming architecture match the required plan. In every case, package equality is not enough: validate reference input, prescaler, counter limits, loop-filter calculations, lock behavior, and register compatibility before approving a substitution.

Vergleich mit Alternativen

Parameter Dieses Produkt ADF4111BRUZ-RL7 ADF4112BRUZ ADF4113BRUZ ADF4116BRUZ-REEL7 ADF4107BRU-REEL
Package 16-TSSOP, 4.40 mm width 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
PLL Architecture Integer-N Integer-N Integer-N Integer-N Integer-N Integer-N
Number of Channels 1 channel 1 channel 1 channel 1 channel 1 channel 1 channel
Special Features Programmable reference divider, A counter, B counter, and prescaler Programmable frequency-synthesis functions Programmable frequency-synthesis functions Programmable frequency-synthesis functions Programmable frequency-synthesis functions Programmable frequency-synthesis functions

Wichtigste Unterscheidungsmerkmale

  • 550 MHz maximum RF input frequency (vs. ADF4116BRUZ-REEL7)
  • Defined 6-bit A counter and 13-bit B counter (vs. ADF4112BRUZ)
  • Programmable reference divider and dual-modulus prescaler (vs. ADF4107BRU-REEL)
  • Production status with a documented 550 MHz family member (vs. ADF4111BRUZ-RL7)

Designhinweise

Keep the reference input, prescaler feedback, RF input, and loop-filter connections short and compact. The 16-TSSOP body is only 4.40 mm wide, so fanout routing can increase parasitic inductance and coupling between the feedback divider, charge pump, and digital programming lines. Use a stable ground reference, place input and output decoupling according to the manufacturer layout, and keep switching-node copper away from the sensitive reference and feedback paths. Review the final assembly for exposed-package and lead-clearance constraints before releasing the fabrication data.

Plan the loop filter around the actual reference frequency, target channel, prescaler, phase-detector gain, charge-pump current, and required settling time. A narrow loop can reduce reference-spur energy but may slow acquisition, while a wider loop can improve capture behavior yet increase integrated phase noise. Validate both lock behavior and spectral purity using the final reference source, charge-pump settings, divider layout, and PCB parasitics. Compare the measured output against the phase-noise and spur limits of the receiver, transmitter, or instrument being developed.

Do not select a replacement solely because it uses a 16-TSSOP package. Before substituting ADF4111BRUZ-RL7, ADF4112BRUZ, ADF4113BRUZ, ADF4116BRUZ-REEL7, or ADF4107BRU-REEL, verify maximum RF frequency, prescaler values, reference-divider range, counter limits, register behavior, and electrical limits. A valid footprint match still requires a valid frequency plan. Also confirm the exact reel suffix and temperature grade so the approved part matches the original assembly documentation.

Separate high-speed digital programming activity from the reference and feedback network. Route the charge-pump return and sensitive analog ground through a low-impedance path rather than relying on fragmented plane currents. Place loop-filter components close to their associated device pins and use component orientations that minimize loop area. After assembly, inspect the reference and RF output for unexpected harmonics, periodic spurs, and sensitivity to nearby digital activity; these tests often reveal grounding or return-path errors more effectively than a static schematic review.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Analog Devices identifies the ADF4110 as a production device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for the exact ADF4110BRUZ-RL7 orderable MPN were not established by the available manufacturer page excerpt.

Daten verifiziert am: 2026-11-20 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

ADF4110BRUZ-RL7 datasheet ADF4110BRUZ-RL7 pinout ADF4110BRUZ-RL7 datasheet pdf ADF4110BRUZ-RL7 550MHz ADF4110BRUZ-RL7 equivalent ADF4110BRUZ-RL7 replacement ADF4110BRUZ-RL7 vs ADF4111BRUZ-RL7 ADF4110BRUZ-RL7 vs ADF4112BRUZ ADF4110BRUZ-RL7 TSSOP-16 ADF4110BRUZ-RL7 price ADF4110BRUZ-RL7 stock Analog Devices ADF4110BRUZ-RL7

Verwandte Bauteile & Begriffe

Analog Devices ADF4110 ADF4110BRUZ-RL7 ADF4111BRUZ-RL7 ADF4112BRUZ ADF4113BRUZ ADF4116BRUZ-REEL7 ADF4107BRU-REEL integer-N PLL frequency synthesizer phase-locked loop clock and timing IC phase-frequency detector precision charge pump dual-modulus P/P+1 prescaler programmable reference divider 6-bit A counter 13-bit B counter 16-TSSOP TSSOP package family surface-mount package RF local oscillator wireless receiver wireless transmitter 550 MHz
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen