ADF5355BCPZ-RL7 - 13.6 GHz Wideband PLL Synthesizer | Analog Devices
Teilenummer: ADF5355BCPZ-RL7 ✓ AktivADF5355BCPZ-RL7 Übersicht
A frequency synthesizer is a clock-and-timing semiconductor that locks a controlled oscillator to a stable reference, then divides or multiplies that reference to produce a programmable output frequency. The ADF5355 belongs to the PLL frequency-synthesizer family and combines a wideband microwave VCO, programmable frequency dividers, a fractional-N divider, a phase detector, and serial programming interfaces in one device. This integration reduces the number of external high-frequency components required in a microwave signal chain.
Key capabilities include operation across the 6.8 GHz to 13.6 GHz VCO range, support for fractional-N or integer-N synthesis, and use with an external reference and loop filter. A divider chain supplies additional lower-frequency outputs. The RFOUTA and RFOUTB output stages can be controlled independently, while the mute-until-lock feature keeps the RFOUTA output stage shut down until the digital lock-detect circuitry confirms that the PLL has locked.
The integrated VCO allows the synthesizer to generate microwave signals directly instead of relying entirely on an external oscillator. Designers can select fractional-N operation when fine frequency resolution or reduced reference-frequency requirements are important, or integer-N operation when the required channel spacing aligns naturally with the reference and division ratio. Programming is performed through the device's serial control interface, and the external loop filter determines loop dynamics, phase noise, and reference-spur behavior.
Typical uses include microwave radio equipment, instrumentation, test and measurement systems, industrial RF equipment, and broadband communication infrastructure. Its wide tuning range is particularly useful where one synthesizer must cover several microwave bands. The ADF5355 is also suitable for local-oscillator generation, coherent test-tone generation, and frequency conversion stages requiring a programmable, phase-locked source.
PCB implementation requires careful treatment of the exposed thermal pad, supply bypassing, RF outputs, and the high-speed reference and program signals. Use the manufacturer's pin-description table when assigning tracks, keep decoupling capacitors adjacent to their supply pins, provide a continuous ground reference beneath the exposed pad, and follow the recommended RF-output routing and impedance-control practices.
This product data combines the ADF5355 technical specifications, sourcing information, confirmed same-brand drop-in options, and practical design guidance. It also highlights the functional limits of the alternatives so engineers can distinguish a true footprint-compatible replacement from a superficially similar PLL that requires register, filtering, or application-circuit changes.
Drop-in-Alternativen für ADF5355BCPZ-RL7 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ADF5355BCPZ-RL7 (gleiche Bauform und Footprint) – abweichend in Package, Loop Filter, Product Type, Reference Input.
ADF5355BCPZ
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →ADF4356BCPZ
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →ADF5355BCPZ-RL7 Technische Daten
| Device Type | Microwave wideband fractional-N and integer-N frequency synthesizer with integrated VCO |
| VCO Output Frequency Range | 6.8 GHz to 13.6 GHz |
| Maximum RF Output Frequency | 13.6 GHz |
| Minimum RF Output Frequency | 6.8 GHz |
| Output Channels | 2 RF outputs with divider-chain outputs |
| PLL Modes | Fractional-N and integer-N |
| Reference Input | External reference frequency |
| Loop Filter | External |
| Mute Until Lock Detect | Enabled through Register 6, Bit DB11 |
| Betriebstemperaturbereich | -40°C to +85°C |
| Gehäuse | 32-lead WFQFN CSP with exposed pad |
| Montageart | Surface mount |
| Manufacturing Status | Recommended for new designs |
ADF5355BCPZ-RL7 32-lead wfqfn csp with exposed pad Pinbelegungsleitfaden
Pinbelegung für ADF5355BCPZ-RL7 (32-lead wfqfn csp with exposed pad-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für ADF5355BCPZ-RL7.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ADF5355BCPZ-RL7 ist geeignet für 6 Anwendungs: Microwave Local Oscillator Generation, Communications RF Signal Source, RF Test and Measurement, Industrial RF Instrumentation, Broadband Frequency Conversion, Clocked Microwave Test Tone Generation.
Microwave Local Oscillator Generation
The ADF5355BCPZ-RL7 fits microwave local-oscillator generation because its integrated VCO covers 6.8 GHz to 13.6 GHz and supports both fractional-N and integer-N synthesis. Place the device in a PLL loop with an external reference and loop filter, then use one RF output for the local oscillator and the other as a spare or divided source when required. The broad tuning range permits one synthesizer platform to address multiple microwave bands, although phase noise and spur performance must be checked against the receiver's conversion requirements.
Empfohlen
Communications RF Signal Source
For communications RF signal sources, the ADF5355BCPZ-RL7 provides programmable output from 6.8 GHz to 13.6 GHz with fractional-N or integer-N loop operation. The device can produce a stable carrier for modulation, frequency-conversion, or interference testing, while the divider chain supplies lower-frequency signals for synchronization or auxiliary clocking. Because an external loop filter shapes the phase noise and spur performance, tune its component values for the selected reference frequency, division ratio, and required spectral mask.
Empfohlen
RF Test and Measurement
The ADF5355BCPZ-RL7 is appropriate for automated RF test equipment that needs a programmable microwave excitation source over 6.8 GHz to 13.6 GHz. Its serial control interface permits test-system software to set operating parameters, while lock detection can be used to qualify source readiness before a measurement begins. The mute-until-lock function helps prevent the RFOUTA stage from producing output before the PLL settles. Final measurement accuracy still depends on the reference source, loop filter, calibration process, and output-power stability.
Empfohlen
Industrial RF Instrumentation
Industrial RF instrumentation can use the ADF5355BCPZ-RL7 to create a compact, digitally controlled microwave source for sensing, process monitoring, or equipment calibration. Integrating the VCO and divider functions into one 32-lead WFQFN CSP reduces the component count associated with a discrete oscillator-and-divider implementation. The operating range of -40°C to +85°C supports industrial equipment, while an external reference allows synchronization to the instrument master clock. Designers must preserve thermal paths under the exposed pad and isolate sensitive RF nodes from noisy control and power routing.
Empfohlen
Broadband Frequency Conversion
The ADF5355BCPZ-RL7 can serve as a local oscillator in up-conversion or down-conversion signal chains where a programmable source is needed across 6.8 GHz to 13.6 GHz. The fractional-N mode permits fine frequency placement, and the divider chain offers additional lower-frequency outputs that can support auxiliary mixing or synchronization functions. In a converter design, source phase noise and spurious signals translate directly into modulation quality and false-signal rejection, so loop-filter optimization and careful isolation between the VCO output and RF input are essential.
Empfohlen
Clocked Microwave Test Tone Generation
The ADF5355BCPZ-RL7 can generate coherent microwave test tones for receiver characterization, gain calibration, and interference testing. Setting the reference and PLL ratios allows the equipment to move between channels while retaining phase coherence with the measurement system. The RFOUTA and RFOUTB stages support flexible source allocation, and digital lock indication can prevent measurements from starting on an unlocked carrier. For high-accuracy results, use a low-noise reference, characterize output amplitude across temperature, and calibrate residual frequency and power errors in the test fixture.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ADF5355BCPZ-RL7 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ADF5355BCPZ | ADF4356BCPZ |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 32-lead WFQFN CSP with exposed pad | 32-lead WFQFN CSP with exposed pad | 32-lead CSP with exposed pad |
| Device Architecture | Integrated wideband VCO frequency synthesizer | Integrated wideband VCO frequency synthesizer | Integrated wideband VCO frequency synthesizer |
| Maximum Advertised RF Frequency | 13.6 GHz | 13.6 GHz | 18 GHz |
| PLL Modes | Fractional-N and integer-N | Fractional-N and integer-N | Fractional-N and integer-N |
| Reference Input | External reference | External reference | External reference |
| Loop Filter | External | External | External |
Wichtigste Unterscheidungsmerkmale
- Identical ADF5355 core and package for the closest ordering-form alternative (vs. ADF5355BCPZ)
- Upper frequency limit matches the target for the direct family comparison (vs. ADF4356BCPZ)
- Established mute-until-lock control for output management (vs. ADF4356BCPZ)
Designhinweise
Treat the exposed pad as a heat-spreading and electrical connection to the PCB ground plane. Use the manufacturer package drawing for the pad geometry, via pattern, and solder-mask clearance. Do not isolate the pad unless the official pin description explicitly permits it. Maintain uninterrupted ground copper beneath the device and avoid cutting thermal pathways beneath the package when planning other board layers.
Place all supply-decoupling capacitors immediately adjacent to their corresponding pins, with the shortest possible ground return. Follow the Analog Devices data-sheet reference layout for the 32-lead WFQFN CSP rather than treating it as a generic QFN. Keep the reference and program traces away from the RF output routing, and use controlled-impedance connections for RF paths where the application requires it.
Design the external loop filter for the selected reference frequency, N division ratio, phase-margin target, and expected phase-noise requirement. Incorrect loop bandwidth can produce ringing, poor lock behavior, or excessive reference spurs. Include a per-channel or in-channel power-down sequence in firmware when multiple ADF5355 devices share a reference, because independent VCOs can disturb one another through power-supply coupling.
Do not assume that identical package dimensions guarantee an interchangeable design. Before replacing ADF5355BCPZ-RL7 with ADF4356BCPZ, compare every pin, RF-output impedance, reference voltage, supply sequence, register definition, and lock-detection behavior against the official data sheets. Analog Devices application note AN-1460 identifies hardware and software changes associated with upgrading to the newer synthesizer family.
Compliance-Informationen
The manufacturer product page identifies ADF5355 as recommended for new designs, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the cited product materials.