Analog Devices

ADF5355BCPZ-RL7 - 13.6 GHz Wideband PLL Synthesizer | Analog Devices

Артикул: ADF5355BCPZ-RL7 ✓ Активен
32-lead WFQFN CSP with exposed pad Package 6.8 GHz to 13.6 GHz Speed
MOQ: 1 |

ADF5355BCPZ-RL7 Обзор

Analog Devices ADF5355BCPZ-RL7 is a microwave wideband frequency synthesizer with an integrated voltage-controlled oscillator, operating from 6.8 GHz to 13.6 GHz at the main RF output. The device supports integer-N and fractional-N phase-locked-loop operation and is packaged in a 32-lead WFQFN CSP with an exposed pad. It is recommended by Analog Devices for new designs.

A frequency synthesizer is a clock-and-timing semiconductor that locks a controlled oscillator to a stable reference, then divides or multiplies that reference to produce a programmable output frequency. The ADF5355 belongs to the PLL frequency-synthesizer family and combines a wideband microwave VCO, programmable frequency dividers, a fractional-N divider, a phase detector, and serial programming interfaces in one device. This integration reduces the number of external high-frequency components required in a microwave signal chain.

Key capabilities include operation across the 6.8 GHz to 13.6 GHz VCO range, support for fractional-N or integer-N synthesis, and use with an external reference and loop filter. A divider chain supplies additional lower-frequency outputs. The RFOUTA and RFOUTB output stages can be controlled independently, while the mute-until-lock feature keeps the RFOUTA output stage shut down until the digital lock-detect circuitry confirms that the PLL has locked.

The integrated VCO allows the synthesizer to generate microwave signals directly instead of relying entirely on an external oscillator. Designers can select fractional-N operation when fine frequency resolution or reduced reference-frequency requirements are important, or integer-N operation when the required channel spacing aligns naturally with the reference and division ratio. Programming is performed through the device's serial control interface, and the external loop filter determines loop dynamics, phase noise, and reference-spur behavior.

Typical uses include microwave radio equipment, instrumentation, test and measurement systems, industrial RF equipment, and broadband communication infrastructure. Its wide tuning range is particularly useful where one synthesizer must cover several microwave bands. The ADF5355 is also suitable for local-oscillator generation, coherent test-tone generation, and frequency conversion stages requiring a programmable, phase-locked source.

PCB implementation requires careful treatment of the exposed thermal pad, supply bypassing, RF outputs, and the high-speed reference and program signals. Use the manufacturer's pin-description table when assigning tracks, keep decoupling capacitors adjacent to their supply pins, provide a continuous ground reference beneath the exposed pad, and follow the recommended RF-output routing and impedance-control practices.

This product data combines the ADF5355 technical specifications, sourcing information, confirmed same-brand drop-in options, and practical design guidance. It also highlights the functional limits of the alternatives so engineers can distinguish a true footprint-compatible replacement from a superficially similar PLL that requires register, filtering, or application-circuit changes.

Аналоги без доработки для ADF5355BCPZ-RL7 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с ADF5355BCPZ-RL7 (тот же форм-фактор и посадочное место) — отличается по Package, Loop Filter, Product Type, Reference Input.

Analog Devices
Package: 32-lead LFCSP with exposed pad
Product Type: Wideband PLL frequency synthesizer with integrated VCO
Сравнить с ADF5355BCPZ-RL7 →
Analog Devices
Package: 32-pin WFQFN with exposed pad
Loop Filter: External loop filter required
Product Type: Microwave wideband synthesizer with integrated VCO
Сравнить с ADF5355BCPZ-RL7 →

ADF5355BCPZ

✅ Прямая замена
Analog Devices
📦 32-lead WFQFN CSP with exposed pad
Microwave wideband synthesizer with integrated VCO · 13.6 GHz · Fractional-N or integer-N PLL · External reference frequency required · External loop filter required · 3.15 V to 3.45 V · 4.75 V to 5.25 V · 3-wire serial interface

Уточнить цену

Открыть даташит →

ADF4356BCPZ

✅ Прямая замена
Analog Devices
📦 32-lead CSP with exposed pad
Wideband PLL frequency synthesizer with integrated VCO · 6800 MHz · 53.125 MHz · Fractional-N and integer-N · 1 clock output · 3-wire serial interface · 3.15 V to 3.45 V

Уточнить цену

Открыть даташит →

ADF5355BCPZ-RL7 Характеристики

Device Type Microwave wideband fractional-N and integer-N frequency synthesizer with integrated VCO
VCO Output Frequency Range 6.8 GHz to 13.6 GHz
Maximum RF Output Frequency 13.6 GHz
Minimum RF Output Frequency 6.8 GHz
Output Channels 2 RF outputs with divider-chain outputs
PLL Modes Fractional-N and integer-N
Reference Input External reference frequency
Loop Filter External
Mute Until Lock Detect Enabled through Register 6, Bit DB11
Диапазон рабочих температур -40°C to +85°C
Корпус 32-lead WFQFN CSP with exposed pad
Тип монтажа Surface mount
Manufacturing Status Recommended for new designs

Руководство по цоколевке ADF5355BCPZ-RL7 в корпусе 32-lead wfqfn csp with exposed pad

Цоколевка для ADF5355BCPZ-RL7 (корпус 32-lead wfqfn csp with exposed pad). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 32-lead wfqfn csp with exposed pad для ADF5355BCPZ-RL7

Нет подробных данных о распиновке для ADF5355BCPZ-RL7.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ADF5355BCPZ-RL7 подходит для 6 применениеs: Microwave Local Oscillator Generation, Communications RF Signal Source, RF Test and Measurement, Industrial RF Instrumentation, Broadband Frequency Conversion, Clocked Microwave Test Tone Generation.

🌐

Microwave Local Oscillator Generation

The ADF5355BCPZ-RL7 fits microwave local-oscillator generation because its integrated VCO covers 6.8 GHz to 13.6 GHz and supports both fractional-N and integer-N synthesis. Place the device in a PLL loop with an external reference and loop filter, then use one RF output for the local oscillator and the other as a spare or divided source when required. The broad tuning range permits one synthesizer platform to address multiple microwave bands, although phase noise and spur performance must be checked against the receiver's conversion requirements.

📡

Communications RF Signal Source

For communications RF signal sources, the ADF5355BCPZ-RL7 provides programmable output from 6.8 GHz to 13.6 GHz with fractional-N or integer-N loop operation. The device can produce a stable carrier for modulation, frequency-conversion, or interference testing, while the divider chain supplies lower-frequency signals for synchronization or auxiliary clocking. Because an external loop filter shapes the phase noise and spur performance, tune its component values for the selected reference frequency, division ratio, and required spectral mask.

🖥️

RF Test and Measurement

The ADF5355BCPZ-RL7 is appropriate for automated RF test equipment that needs a programmable microwave excitation source over 6.8 GHz to 13.6 GHz. Its serial control interface permits test-system software to set operating parameters, while lock detection can be used to qualify source readiness before a measurement begins. The mute-until-lock function helps prevent the RFOUTA stage from producing output before the PLL settles. Final measurement accuracy still depends on the reference source, loop filter, calibration process, and output-power stability.

🏭

Industrial RF Instrumentation

Industrial RF instrumentation can use the ADF5355BCPZ-RL7 to create a compact, digitally controlled microwave source for sensing, process monitoring, or equipment calibration. Integrating the VCO and divider functions into one 32-lead WFQFN CSP reduces the component count associated with a discrete oscillator-and-divider implementation. The operating range of -40°C to +85°C supports industrial equipment, while an external reference allows synchronization to the instrument master clock. Designers must preserve thermal paths under the exposed pad and isolate sensitive RF nodes from noisy control and power routing.

📶

Broadband Frequency Conversion

The ADF5355BCPZ-RL7 can serve as a local oscillator in up-conversion or down-conversion signal chains where a programmable source is needed across 6.8 GHz to 13.6 GHz. The fractional-N mode permits fine frequency placement, and the divider chain offers additional lower-frequency outputs that can support auxiliary mixing or synchronization functions. In a converter design, source phase noise and spurious signals translate directly into modulation quality and false-signal rejection, so loop-filter optimization and careful isolation between the VCO output and RF input are essential.

📡

Clocked Microwave Test Tone Generation

The ADF5355BCPZ-RL7 can generate coherent microwave test tones for receiver characterization, gain calibration, and interference testing. Setting the reference and PLL ratios allows the equipment to move between channels while retaining phase coherence with the measurement system. The RFOUTA and RFOUTB stages support flexible source allocation, and digital lock indication can prevent measurements from starting on an unlocked carrier. For high-accuracy results, use a low-noise reference, characterize output amplitude across temperature, and calibrate residual frequency and power errors in the test fixture.

What are the key specifications of ADF5355BCPZ-RL7 that engineers should know?
The ADF5355BCPZ-RL7 combines an integrated 6.8 GHz to 13.6 GHz VCO with fractional-N and integer-N PLL synthesis in a 32-lead WFQFN CSP. It provides two RF output paths, an external reference input, an external loop filter, programmable frequency dividers, and digital lock detection. According to the Analog Devices ADF5355 data sheet, the RFOUTA stage can remain shut down until lock through the mute-until-lock function.
Where can I download the ADF5355BCPZ-RL7 datasheet PDF?
The official ADF5355BCPZ-RL7 data sheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF5355.pdf. The document contains the device description, electrical characteristics, register information, pin descriptions, application information, and recommended implementation details. The product page at analog.com/en/products/adf5355.html also links to the latest data sheet and supporting design resources.
Where can I find the ADF5355BCPZ-RL7 pinout and package information?
The ADF5355BCPZ-RL7 uses a 32-lead WFQFN CSP with an exposed thermal pad. Use the pin-description table and package outline in the official Analog Devices ADF5355 data sheet to assign signals and land patterns; that table is the authoritative source for pin numbers, exposed-pad connections, and test-point access. Keep the exposed pad connected to the PCB ground plane as specified by the manufacturer.
What frequency range does the ADF5355BCPZ-RL7 generate?
The integrated VCO in the ADF5355BCPZ-RL7 operates from 6.8 GHz to 13.6 GHz at the RF output. Lower frequencies are available through the device's frequency-divider chain. According to the Analog Devices ADF5355 data sheet, the architecture supports both fractional-N and integer-N operation with an external reference and external loop filter.
When should I choose the ADF5355BCPZ-RL7 over a discrete VCO and PLL solution?
Choose the ADF5355BCPZ-RL7 when a design needs programmable microwave generation across 6.8 GHz to 13.6 GHz without implementing a separate VCO, PLL, divider chain, and reference-control network. Its integrated VCO and divider architecture reduces assembly complexity and board area, while fractional-N operation supports fine channel spacing. The external loop filter and reference still require careful RF layout and stability analysis.
Is the ADF5355BCPZ-RL7 suitable for microwave test equipment?
The ADF5355BCPZ-RL7 is suitable for programmable local-oscillator and test-signal generation in microwave instrumentation because it covers 6.8 GHz to 13.6 GHz and supports both fractional-N and integer-N synthesis. Phase-noise, spur, and output-power performance must be checked against the required measurement limits at each operating frequency. The external loop filter is especially important when optimizing close-in and far-out phase noise.
How does the ADF5355BCPZ-RL7 compare with ADF5355BCPZ?
The ADF5355BCPZ-RL7 and ADF5355BCPZ identify the same ADF5355 core and 32-lead WFQFN CSP family, but the ordering suffix identifies a different delivery form. The -RL7 version is supplied in a reeled form for production handling. Confirm package dimensions, exposed-pad construction, temperature grade, and reel orientation against the official data sheet before treating either ordering code as a board-level substitute.
ADF5355BCPZ-RL7 vs ADF4356BCPZ - which is better for a 6.8 GHz to 13.6 GHz design?
The ADF5355BCPZ-RL7 is the closer functional match when the design requires the ADF5355's 6.8 GHz to 13.6 GHz integrated-VCO range, fractional-N behavior, divider chain, and mute-until-lock feature. The ADF4356BCPZ covers a different wideband synthesis range and has a distinct register set and output implementation. Although both use 32-lead CSP-style packages, engineers should verify every pin, supply, RF output, and control signal before considering a footprint change.
What is the best drop-in replacement for ADF5355BCPZ-RL7?
The closest confirmed same-brand drop-in is ADF5355BCPZ because it retains the ADF5355 core and 32-lead WFQFN CSP family; the ordering-form suffix must still be checked for assembly requirements. No cross-brand drop-in replacement was established. ADF4356BCPZ is a functionally related wideband synthesizer, but Analog Devices application note AN-1460 describes hardware and software changes when upgrading from ADF5355 to ADF5356-style platforms, so it should not be treated as an automatic substitute.
Can ADF4356BCPZ replace ADF5355BCPZ-RL7 without a PCB redesign?
An ADF4356BCPZ substitution requires a complete pin-by-pin and firmware review rather than assuming automatic drop-in compatibility. Both devices appear in 32-lead CSP-related listings, but RF output behavior, tuning range, register organization, reference handling, and lock-control implementation differ. Treat the pinout as unverified until it is compared with the official ADF5355 and ADF4356 data sheets, then update the control firmware and loop-filter design accordingly.
When should I choose ADF5355BCPZ-RL7 over ADF4356BCPZ?
Choose ADF5355BCPZ-RL7 when the system is designed around the ADF5355 feature set, particularly its 6.8 GHz to 13.6 GHz main-output range, fractional-N and integer-N modes, divider-chain outputs, and mute-until-lock behavior. ADF4356BCPZ may be attractive for a different frequency plan, but adopting it can require hardware, loop-filter, register, and firmware changes. Use the selection decision as a design-platform decision rather than a simple MPN substitution.
Is ADF5355BCPZ-RL7 in stock, and what is its lead time?
Current stock and production lead time should be requested through the Request a Quote form on this page. The manufacturer identifies ADF5355 as recommended for new designs, indicating active product support, but lifecycle status does not by itself establish available inventory, allocated quantity, or delivery timing. Include your required quantity, reel format, date code preference, and destination country when requesting the quotation.
Where can I buy ADF5355BCPZ-RL7 online?
Use the Request a Quote form on this page to request ADF5355BCPZ-RL7 availability, current commercial terms, and a delivery quotation. The exact ordering code, reel format, quantity, and destination affect allocation and logistics. A lifecycle designation of active confirms current manufacturer support for new designs, but it is not a guarantee of immediate stock or a fixed lead time.
What is the price of ADF5355BCPZ-RL7?
Submit the ADF5355BCPZ-RL7 quantity and reel requirements through the Request a Quote form on this page for the current commercial response. Pricing can vary with order quantity, date-code condition, packaging format, market demand, and delivery terms. The quote workflow is preferable to a static price because the component is a high-value wideband synthesizer with configuration-sensitive supply requirements.
What can replace ADF5355BCPZ-RL7?
The closest supported replacement path starts with ADF5355BCPZ, subject to confirming the ordering form and reel orientation against the manufacturer's package information. ADF4356BCPZ offers a related wideband-synthesizer function but requires validation of the footprint, RF outputs, registers, reference arrangement, loop filter, and firmware. No confirmed cross-brand drop-in replacement was identified, so use the Request a Quote form when sourcing the exact MPN or an approved engineering alternative.

Справочные инженерные данные для ADF5355BCPZ-RL7 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Select ADF5355BCPZ-RL7 for a new microwave design that needs programmable output from 6.8 GHz to 13.6 GHz, fractional-N or integer-N operation, integrated VCO and divider functions, and the established ADF5355 control architecture. Choose ADF5355BCPZ when its assembly form and reel configuration fit the manufacturing flow better; its functional core is the closest match, but confirm the ordering details before substitution. Consider ADF4356BCPZ only when its broader upper-frequency capability or other device characteristics justify a redesign review. The shared 32-lead CSP-style format does not establish automatic interchangeability, so validate RF outputs, power rails, reference circuitry, lock detection, registers, and firmware. For production procurement, request an exact-MPN quotation through the Request a Quote form.

Сравнение с аналогами

Параметр Этот товар ADF5355BCPZ ADF4356BCPZ
Brand Analog Devices Analog Devices Analog Devices
Package 32-lead WFQFN CSP with exposed pad 32-lead WFQFN CSP with exposed pad 32-lead CSP with exposed pad
Device Architecture Integrated wideband VCO frequency synthesizer Integrated wideband VCO frequency synthesizer Integrated wideband VCO frequency synthesizer
Maximum Advertised RF Frequency 13.6 GHz 13.6 GHz 18 GHz
PLL Modes Fractional-N and integer-N Fractional-N and integer-N Fractional-N and integer-N
Reference Input External reference External reference External reference
Loop Filter External External External

Ключевые отличия

  • Identical ADF5355 core and package for the closest ordering-form alternative (против ADF5355BCPZ)
  • Upper frequency limit matches the target for the direct family comparison (против ADF4356BCPZ)
  • Established mute-until-lock control for output management (против ADF4356BCPZ)

Заметки по проектированию

Treat the exposed pad as a heat-spreading and electrical connection to the PCB ground plane. Use the manufacturer package drawing for the pad geometry, via pattern, and solder-mask clearance. Do not isolate the pad unless the official pin description explicitly permits it. Maintain uninterrupted ground copper beneath the device and avoid cutting thermal pathways beneath the package when planning other board layers.

Place all supply-decoupling capacitors immediately adjacent to their corresponding pins, with the shortest possible ground return. Follow the Analog Devices data-sheet reference layout for the 32-lead WFQFN CSP rather than treating it as a generic QFN. Keep the reference and program traces away from the RF output routing, and use controlled-impedance connections for RF paths where the application requires it.

Design the external loop filter for the selected reference frequency, N division ratio, phase-margin target, and expected phase-noise requirement. Incorrect loop bandwidth can produce ringing, poor lock behavior, or excessive reference spurs. Include a per-channel or in-channel power-down sequence in firmware when multiple ADF5355 devices share a reference, because independent VCOs can disturb one another through power-supply coupling.

Do not assume that identical package dimensions guarantee an interchangeable design. Before replacing ADF5355BCPZ-RL7 with ADF4356BCPZ, compare every pin, RF-output impedance, reference voltage, supply sequence, register definition, and lock-detection behavior against the official data sheets. Analog Devices application note AN-1460 identifies hardware and software changes associated with upgrading to the newer synthesizer family.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer product page identifies ADF5355 as recommended for new designs, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the cited product materials.

Данные проверены: 2026-11-20 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

adf5355bcpz datasheet ADF5355BCPZ-RL7 datasheet ADF5355BCPZ-RL7 datasheet pdf ADF5355BCPZ-RL7 pinout ADF5355BCPZ-RL7 equivalent ADF5355BCPZ-RL7 replacement ADF5355BCPZ-RL7 cross reference ADF5355BCPZ-RL7 vs ADF4356BCPZ ADF5355BCPZ-RL7 application circuit ADF5355BCPZ-RL7 price ADF5355BCPZ-RL7 stock Analog Devices ADF5355BCPZ-RL7 ADF5355BCPZ-RL7 schematic ADF5355BCPZ 32 WFQFN pinout ADF5355 fractional N synthesizer

Связанные компоненты & термины

Analog Devices ADF5355BCPZ-RL7 ADF5355BCPZ ADF4356BCPZ ADF5355 ADF5356 frequency synthesizer phase-locked loop PLL integer-N fractional-N integrated voltage-controlled oscillator VCO clock and timing IC digital lock detect mute-until-lock external reference external loop filter frequency divider RFOUTA RFOUTB 32-lead WFQFN CSP QFN family surface mount SMD 6.8 GHz to 13.6 GHz microwave local oscillator RoHS REACH AEC-Q100
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ