Analog Devices

ADM208EARS - Quad RS-232 Transceiver | Analog Devices

Teilenummer: ADM208EARS ✓ Aktiv
4.5 V to 5.5 V Vdss 13 mA Id EIA-232-E and CCITT V.28 Rds(on) 24-pin SSOP Package
MOQ: 1 |

ADM208EARS Übersicht

The Analog Devices ADM208EARS is a four-driver, four-receiver RS-232 transceiver operating from a single +5 V supply in a 24-pin SSOP package. It supports data rates up to 230 kbps, implements four transmit channels and four receive channels, and is designed for EIA-232-E and CCITT V.28 interfaces. The device also provides ±15 kV ESD protection for ports exposed to electrostatic discharge during industrial, communications, and instrumentation applications.

An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and the voltage levels used by RS-232 communications links. It belongs to the line-driver and line-receiver hierarchy, combines bidirectional interface channels in one package, and removes the need for separate driver and receiver ICs when several serial ports share the same board.

The ADM208EARS provides a 4.5 V to 5.5 V operating supply range and approximately 13 mA operating supply current. Four driver outputs support point-to-point RS-232 links, while four receiver inputs support independent receive channels. Its 230 kbps maximum data rate supports legacy serial communications, industrial equipment, data acquisition, point-of-sale terminals, and control systems that rely on the established RS-232 electrical interface.

The single-supply architecture simplifies power planning compared with conventional RS-232 implementations requiring positive and negative rails. Internal level translation allows CMOS or TTL-compatible logic signals to connect to RS-232 lines. The E suffix identifies the enhanced device family, whose published features include conformance with EIA-232-E and CCITT V.28, EMI/EMC protection considerations, and enhanced ESD protection. The ADM208EARS is offered in a 24-pin SSOP package for compact surface-mount designs.

Typical uses include multi-port instrumentation, test equipment, industrial controllers, security systems, and service interfaces. Four transmitters and four receivers can support several unidirectional or full-duplex RS-232 connections when the port allocation permits. The device is particularly useful when a design needs multiple RS-232 channels without allocating separate packages for every driver and receiver.

Place the 0.1 µF decoupling capacitor close to the +5 V supply pin and ground return, and route each interface trace to minimize exposure to fast-edge and ESD events. Confirm signal polarity, receiver thresholds, and connector-side protection against the pin-description table in the manufacturer datasheet before assigning PCB nets.

This product record combines interface architecture, operating limits, package details, practical decoupling guidance, and a pin-compatible substitution review. It is intended to help engineers select the correct quad transceiver, plan a reliable RS-232 port, and distinguish functional compatibility from changes that require board-level validation.

Drop-in-Alternativen für ADM208EARS – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

ADM208EARSZ-REEL

✅ Drop-In
📦 24-pin SSOP
Same 4 drivers, 4 receivers, 230 kbps data rate, 4.5 V to 5.5 V supply, and 13 mA operating current; orderable suffix and reel presentation differ

📋 Referenzalternative (nicht im Katalog)

ADM208EARS Technische Daten

Product Type RS-232 transceiver
Number of Drivers 4 drivers
Number of Receivers 4 receivers
Maximum Data Rate 230 kbps
Supply Voltage Range 4.5 V to 5.5 V
Nominal Supply Voltage +5 V
Operating Supply Current 13 mA
Gehäuse 24-pin SSOP
Montageart Surface mount
Interface Standards EIA-232-E and CCITT V.28
ESD Protection ±15 kV
EMI/EMC Protection Protected RS-232 line drivers and receivers
Logic Compatibility +5 V CMOS-compatible logic interface
Power Supply Architecture Single-supply operation
Decoupling Requirement 0.1 µF

ADM208EARS 24-pin ssop Pinbelegungsleitfaden

Pinbelegung für ADM208EARS (24-pin ssop-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für ADM208EARS im 24-pin ssop-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ADM208EARS.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ADM208EARS ist geeignet für 6 Anwendungs: Multi-Port Industrial Controller, Data-Acquisition Instrument, Point-of-Sale Terminal, Security and Access-Control Panel, Telecommunications Service Interface, Embedded Service and Configuration Port.

🏭

Multi-Port Industrial Controller

The ADM208EARS fits controllers that must connect several legacy RS-232 devices through one compact interface package. Four drivers and four receivers provide flexible channel allocation without requiring separate driver and receiver ICs, while the 230 kbps maximum data rate covers common supervisory and configuration links. Its 4.5 V to 5.5 V operating range simplifies integration with +5 V control logic. Keep each cable-side port subject to appropriate surge and ESD protection, especially when connected to external equipment through long conductors.

🔧

Data-Acquisition Instrument

The ADM208EARS is useful in laboratory and industrial data-acquisition equipment that requires several RS-232 command or control channels. The four transmitters support outbound requests, while four receivers can collect responses from independent devices. Operation from a single +5 V supply and a maximum data rate of 230 kbps align with traditional serial-instrument protocols. For bench equipment, include a defined ground strategy, connect unused receiver inputs appropriately, and protect externally accessible connectors against electrostatic discharge.

🖥️

Point-of-Sale Terminal

Retail terminals often combine one RS-232 link for a printer or scanner with additional service or peripheral ports. The ADM208EARS places four drivers and four receivers in one 24-pin SSOP, allowing unused channels to support future accessories without immediately adding another interface package. Its +5 V supply operation and CMOS-compatible logic side simplify integration into embedded terminal hardware. Validate the peripheral's signal levels, handshake requirements, connector wiring, and cable length before assigning every transceiver channel.

🎥

Security and Access-Control Panel

The ADM208EARS can support multiple RS-232 connections in an access-control panel, programmable lock controller, or surveillance system where readers, keypads, or configuration tools use legacy serial protocols. Four receiver channels can monitor several devices, while four driver channels can issue commands. The 230 kbps capability supports many legacy control protocols, and the 4.5 V to 5.5 V supply range is suitable for embedded +5 V systems. Use chassis grounding and transient protection appropriate to the installation environment.

🌐

Telecommunications Service Interface

The ADM208EARS is applicable to network equipment and service modules that retain RS-232 for local configuration, diagnostics, or equipment-to-equipment links. A single +5 V supply is convenient in telecommunications boards, and the quad-transceiver configuration can consolidate several service ports. Its conformance with EIA-232-E and CCITT V.28 supports established interface behavior. The circuit must still account for connector geometry, ground offsets, cable transients, and the limited drive capability inherent in point-to-point RS-232 links.

🧩

Embedded Service and Configuration Port

The ADM208EARS can consolidate several service-oriented serial interfaces on an embedded controller, including local programming, diagnostics, and configuration links. Four transmit and four receive channels offer flexibility for asynchronous command protocols, while the single +5 V supply reduces the number of external rails required around the interface. Its 24-pin SSOP package also saves board area compared with separate quad-driver and quad-receiver packages. Confirm logic polarity and pin assignments in the manufacturer pin-description table.

What is the operating voltage of ADM208EARS?
The ADM208EARS operates from a single +5 V supply over a 4.5 V to 5.5 V range. According to the Analog Devices manufacturer datasheet, the single-supply architecture supports CMOS-compatible logic interfacing while providing the bipolar signal levels required by RS-232. Place the specified 0.1 µF bypass capacitor close to the supply pins and return its ground connection directly to the ground plane.
What is the maximum data rate of ADM208EARS?
The ADM208EARS supports data rates up to 230 kbps. Analog Devices states that the ADM208E family conforms to the EIA-232-E and CCITT V.28 specifications, making it appropriate for conventional point-to-point serial links. The maximum signaling rate is sufficient for many industrial controls, data-acquisition systems, service ports, and legacy peripheral interfaces.
How many RS-232 drivers and receivers does ADM208EARS contain?
The ADM208EARS contains four RS-232 drivers and four RS-232 receivers in one 24-pin SSOP package. According to the Analog Devices product description, this 4/4 arrangement allows one IC to implement several serial channels. Each channel can be assigned to a point-to-point connection, subject to the electrical limitations of the RS-232 interface and the port requirements of the connected equipment.
Where can I download the ADM208EARS datasheet PDF?
The ADM208EARS datasheet and supporting documentation are available from the Analog Devices ADM208E product page at https://www.analog.com/en/products/adm208e.html. The manufacturer datasheet contains the pin-description table, electrical characteristics, interface standards, ESD information, and recommended application details that should govern PCB implementation.
Where can I find the ADM208EARS pinout?
The ADM208EARS pinout is defined by the 24-pin SSOP pin-description table in the Analog Devices manufacturer datasheet. Use that table when assigning driver outputs, receiver inputs, supply pins, ground connections, and control functions. Do not infer a complete pin map from a generic quad-transceiver diagram because ordering and exposed functionality can differ between RS-232 families.
What is the best drop-in replacement for ADM208EARS?
The ADM208EARSZ-REEL is a documented parametric equivalent that provides the same four-driver, four-receiver, 230 kbps RS-232 function in the same 24-pin SSOP footprint. According to the manufacturer comparison information, the supply range and operating current also match. Final substitution approval should still include pin assignment, ordering-code, qualification, and lifecycle review for the intended production build.
Can ADM208EARSZ-REEL replace ADM208EARS?
Yes, the ADM208EARSZ-REEL can serve as a pin-compatible functional substitute for the ADM208EARS. The documented comparison identifies the same 230 kbps data rate, four drivers, four receivers, 4.5 V to 5.5 V supply range, 13 mA operating current, and 24-pin SSOP package. The principal difference is the orderable suffix and reel presentation, so purchasing and documentation systems must reflect the replacement MPN.
What can replace ADM208EARS in a pin-compatible design?
The ADM208EARSZ-REEL is the clearest pin-compatible replacement identified for the ADM208EARS because it retains the four-driver, four-receiver configuration and 24-pin SSOP package. The two devices also share a 230 kbps maximum data rate and 4.5 V to 5.5 V supply range. Review lifecycle notices and approve the exact orderable MPN before using it as a lifecycle or assembly-form change.
Where can I buy ADM208EARS online?
Use the Request a Quote form on this page to request ADM208EARS availability, lead time, order quantity, and a current quotation. The request allows the exact ADM208EARS MPN and 24-pin SSOP configuration to be confirmed before procurement. Production planners should also verify the manufacturer lifecycle status and any date-code or traceability requirements.
What is the price of ADM208EARS?
Use the Request a Quote form on this page for the current ADM208EARS price and volume terms. A firm quotation should reflect the requested quantity, date code, delivery packaging, and current production status. Engineers evaluating a replacement should quote ADM208EARS and the ADM208EARSZ-REEL separately if the assembly can accept the alternative orderable suffix.
What is the lead time for ADM208EARS?
The current lead time for ADM208EARS should be confirmed through the Request a Quote form on this page. Include the required quantity, target delivery date, acceptable date-code range, and whether tube or reel presentation is acceptable. This lets procurement validate supply without treating a generic catalog lead time as a guaranteed production schedule.
Is ADM208EARS in stock?
Request current ADM208EARS inventory and lead-time confirmation through the Request a Quote form on this page. Include the planned order quantity and required production date because inventory can change independently of the product lifecycle. For dual sourcing, request availability for both ADM208EARS and the pin-compatible ADM208EARSZ-REEL option.
ADM208EARS vs ADM208EARSZ-REEL - which is better for an RS-232 design?
The ADM208EARS and ADM208EARSZ-REEL provide the same core interface specification: four drivers, four receivers, up to 230 kbps, a 4.5 V to 5.5 V supply range, and a 24-pin SSOP package. According to the Analog Devices comparison information, their operating current is also approximately 13 mA. Selection should therefore focus on orderable suffix, packaging preference, lifecycle, and supply availability rather than interface performance.
When should I choose ADM208EARS over another quad RS-232 transceiver?
Choose the ADM208EARS when the design requires four RS-232 drivers, four receivers, a 230 kbps maximum data rate, single +5 V operation, and a compact 24-pin SSOP implementation. It is particularly suitable when multiple legacy serial ports are required on a space-constrained controller board. If an alternative changes supply architecture, logic levels, channel count, or package dimensions, treat it as a redesign rather than a drop-in substitution.
Is ADM208EARS suitable for industrial and harsh electrical environments?
The ADM208EARS is suitable for industrial interface equipment when its published electrical limits and system protection requirements are observed. According to the Analog Devices manufacturer datasheet, the ADM208E family conforms to EIA-232-E and CCITT V.28, provides ±15 kV ESD protection, and addresses EMI/EMC requirements. External surge and cable protection may still be needed for long or exposed industrial cables.

Technische Referenzdaten für ADM208EARS – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the ADM208EARS when a design needs four RS-232 transmitters and four receivers, a maximum signaling rate of 230 kbps, and operation from a single +5 V supply in a 24-pin SSOP package. It is well suited to multi-port instrumentation, industrial controllers, service interfaces, and embedded systems that retain legacy RS-232 peripherals. The ADM208EARSZ-REEL offers the same documented channel count, data rate, supply range, operating current, and package, making it the practical alternative when the reel orderable suffix is acceptable. Treat any other transceiver with different logic levels, supply architecture, channel allocation, or package geometry as a potential redesign. Before releasing a PCB, verify the pin-description table, connector wiring, unused-channel connections, decoupling placement, and cable-side protection against the manufacturer datasheet.

Vergleich mit Alternativen

Parameter Dieses Produkt ADM208EARSZ-REEL
Brand Analog Devices Analog Devices
Package 24-pin SSOP 24-pin SSOP
Transmitter Count 4 drivers 4 drivers
Receiver Count 4 receivers 4 receivers
Maximum Data Rate 230 kbps 230 kbps
Operating Supply Range 4.5 V to 5.5 V 4.5 V to 5.5 V
Operating Supply Current 13 mA 13 mA
Interface Standards EIA-232-E and CCITT V.28 RS-232 and V.28
Supply Architecture Single +5 V supply Single +5 V supply

Wichtigste Unterscheidungsmerkmale

  • Consolidates eight configurable interface functions (vs. ADM208EARSZ-REEL)
  • Supports established asynchronous RS-232 data rates (vs. ADM208EARSZ-REEL)
  • Single-supply implementation simplifies board power (vs. ADM208EARSZ-REEL)

Designhinweise

Place the 0.1 µF bypass capacitor directly beside the ADM208EARS supply and ground pins. Keep the connection short and use a ground-plane return rather than routing the capacitor through peripheral traces. This reduces supply impedance at switching edges and limits coupling between adjacent digital, logic-level, and cable-side RS-232 nodes.

Keep logic-level inputs and outputs away from RS-232 driver outputs and connector entries. Route driver traces as short as practical, preserve a continuous ground reference, and avoid placing sensitive logic beneath cable connectors. The driver channels are designed for point-to-point links, so minimize intermediate stubs and branching on cable-side nets.

Do not substitute a receiver or driver for the complete transceiver without reviewing every pin assignment. Verify the number of drivers, number of receivers, logic polarity, supply range, and package drawing in the manufacturer pin-description table. A matching package alone does not establish functional interchangeability, especially when enable, shutdown, or unused-channel treatment differs.

For externally accessible cables, combine the device's ±15 kV ESD capability with appropriate connector-level protection and chassis-grounding strategy. The integrated protection reduces susceptibility to electrostatic discharge, but long cables can also expose the interface to surge events outside that rating. Validate the complete protection network and enclosure grounding in the final equipment.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Analog Devices states that the ADM208E family conforms to EIA-232-E and CCITT V.28 and provides ±15 kV ESD protection. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the referenced product information.

Ähnliche Suchanfragen

ADM208EARS datasheet ADM208EARS pinout ADM208EARS datasheet pdf ADM208EARS specifications ADM208EARS 230 kbps ADM208EARS 24-pin SSOP ADM208EARS equivalent ADM208EARS drop-in replacement ADM208EARS vs ADM208EARSZ-REEL Analog Devices ADM208EARS ADM208EARS RS-232 transceiver ADM208EARS price ADM208EARS stock ADM208EARS industrial interface ADM208EARS ESD protection

Verwandte Bauteile & Begriffe

Analog Devices ADM208EARS ADM208EARSZ-REEL RS-232 transceiver line driver line receiver EIA-232-E CCITT V.28 CMOS logic single +5 V supply 230 kbps data rate 4.5 V to 5.5 V operating supply 13 mA operating current ±15 kV ESD protection 24-pin SSOP SSOP package family surface-mount technology industrial automation data acquisition instrumentation point-of-sale terminal security access control EMI/EMC protection point-to-point serial interface
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen