ADM208EARS - Quad RS-232 Transceiver | Analog Devices
MPN: ADM208EARS ✓ فعالADM208EARS نمای کلی
An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and the voltage levels used by RS-232 communications links. It belongs to the line-driver and line-receiver hierarchy, combines bidirectional interface channels in one package, and removes the need for separate driver and receiver ICs when several serial ports share the same board.
The ADM208EARS provides a 4.5 V to 5.5 V operating supply range and approximately 13 mA operating supply current. Four driver outputs support point-to-point RS-232 links, while four receiver inputs support independent receive channels. Its 230 kbps maximum data rate supports legacy serial communications, industrial equipment, data acquisition, point-of-sale terminals, and control systems that rely on the established RS-232 electrical interface.
The single-supply architecture simplifies power planning compared with conventional RS-232 implementations requiring positive and negative rails. Internal level translation allows CMOS or TTL-compatible logic signals to connect to RS-232 lines. The E suffix identifies the enhanced device family, whose published features include conformance with EIA-232-E and CCITT V.28, EMI/EMC protection considerations, and enhanced ESD protection. The ADM208EARS is offered in a 24-pin SSOP package for compact surface-mount designs.
Typical uses include multi-port instrumentation, test equipment, industrial controllers, security systems, and service interfaces. Four transmitters and four receivers can support several unidirectional or full-duplex RS-232 connections when the port allocation permits. The device is particularly useful when a design needs multiple RS-232 channels without allocating separate packages for every driver and receiver.
Place the 0.1 µF decoupling capacitor close to the +5 V supply pin and ground return, and route each interface trace to minimize exposure to fast-edge and ESD events. Confirm signal polarity, receiver thresholds, and connector-side protection against the pin-description table in the manufacturer datasheet before assigning PCB nets.
This product record combines interface architecture, operating limits, package details, practical decoupling guidance, and a pin-compatible substitution review. It is intended to help engineers select the correct quad transceiver, plan a reliable RS-232 port, and distinguish functional compatibility from changes that require board-level validation.
جایگزینهای drop-in برای ADM208EARS — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
ADM208EARSZ-REEL
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ADM208EARS مشخصات
| Product Type | RS-232 transceiver |
| Number of Drivers | 4 drivers |
| Number of Receivers | 4 receivers |
| Maximum Data Rate | 230 kbps |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Nominal Supply Voltage | +5 V |
| Operating Supply Current | 13 mA |
| بستهبندی | 24-pin SSOP |
| نوع نصب | Surface mount |
| Interface Standards | EIA-232-E and CCITT V.28 |
| ESD Protection | ±15 kV |
| EMI/EMC Protection | Protected RS-232 line drivers and receivers |
| Logic Compatibility | +5 V CMOS-compatible logic interface |
| Power Supply Architecture | Single-supply operation |
| Decoupling Requirement | 0.1 µF |
راهنمای پیکربندی پین ADM208EARS 24-pin ssop
پیکربندی پین برای ADM208EARS (پکیج 24-pin ssop). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای ADM208EARS.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ADM208EARS مناسب است برای 6 کاربردs: Multi-Port Industrial Controller, Data-Acquisition Instrument, Point-of-Sale Terminal, Security and Access-Control Panel, Telecommunications Service Interface, Embedded Service and Configuration Port.
Multi-Port Industrial Controller
The ADM208EARS fits controllers that must connect several legacy RS-232 devices through one compact interface package. Four drivers and four receivers provide flexible channel allocation without requiring separate driver and receiver ICs, while the 230 kbps maximum data rate covers common supervisory and configuration links. Its 4.5 V to 5.5 V operating range simplifies integration with +5 V control logic. Keep each cable-side port subject to appropriate surge and ESD protection, especially when connected to external equipment through long conductors.
پیشنهادی
Data-Acquisition Instrument
The ADM208EARS is useful in laboratory and industrial data-acquisition equipment that requires several RS-232 command or control channels. The four transmitters support outbound requests, while four receivers can collect responses from independent devices. Operation from a single +5 V supply and a maximum data rate of 230 kbps align with traditional serial-instrument protocols. For bench equipment, include a defined ground strategy, connect unused receiver inputs appropriately, and protect externally accessible connectors against electrostatic discharge.
پیشنهادی
Point-of-Sale Terminal
Retail terminals often combine one RS-232 link for a printer or scanner with additional service or peripheral ports. The ADM208EARS places four drivers and four receivers in one 24-pin SSOP, allowing unused channels to support future accessories without immediately adding another interface package. Its +5 V supply operation and CMOS-compatible logic side simplify integration into embedded terminal hardware. Validate the peripheral's signal levels, handshake requirements, connector wiring, and cable length before assigning every transceiver channel.
پیشنهادی
Security and Access-Control Panel
The ADM208EARS can support multiple RS-232 connections in an access-control panel, programmable lock controller, or surveillance system where readers, keypads, or configuration tools use legacy serial protocols. Four receiver channels can monitor several devices, while four driver channels can issue commands. The 230 kbps capability supports many legacy control protocols, and the 4.5 V to 5.5 V supply range is suitable for embedded +5 V systems. Use chassis grounding and transient protection appropriate to the installation environment.
پیشنهادی
Telecommunications Service Interface
The ADM208EARS is applicable to network equipment and service modules that retain RS-232 for local configuration, diagnostics, or equipment-to-equipment links. A single +5 V supply is convenient in telecommunications boards, and the quad-transceiver configuration can consolidate several service ports. Its conformance with EIA-232-E and CCITT V.28 supports established interface behavior. The circuit must still account for connector geometry, ground offsets, cable transients, and the limited drive capability inherent in point-to-point RS-232 links.
پیشنهادی
Embedded Service and Configuration Port
The ADM208EARS can consolidate several service-oriented serial interfaces on an embedded controller, including local programming, diagnostics, and configuration links. Four transmit and four receive channels offer flexibility for asynchronous command protocols, while the single +5 V supply reduces the number of external rails required around the interface. Its 24-pin SSOP package also saves board area compared with separate quad-driver and quad-receiver packages. Confirm logic polarity and pin assignments in the manufacturer pin-description table.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ADM208EARS — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ADM208EARSZ-REEL |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 24-pin SSOP | 24-pin SSOP |
| Transmitter Count | 4 drivers | 4 drivers |
| Receiver Count | 4 receivers | 4 receivers |
| Maximum Data Rate | 230 kbps | 230 kbps |
| Operating Supply Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Operating Supply Current | 13 mA | 13 mA |
| Interface Standards | EIA-232-E and CCITT V.28 | RS-232 and V.28 |
| Supply Architecture | Single +5 V supply | Single +5 V supply |
تفاوتهای کلیدی
- Consolidates eight configurable interface functions (در مقابلADM208EARSZ-REEL)
- Supports established asynchronous RS-232 data rates (در مقابلADM208EARSZ-REEL)
- Single-supply implementation simplifies board power (در مقابلADM208EARSZ-REEL)
یادداشتهای طراحی
Place the 0.1 µF bypass capacitor directly beside the ADM208EARS supply and ground pins. Keep the connection short and use a ground-plane return rather than routing the capacitor through peripheral traces. This reduces supply impedance at switching edges and limits coupling between adjacent digital, logic-level, and cable-side RS-232 nodes.
Keep logic-level inputs and outputs away from RS-232 driver outputs and connector entries. Route driver traces as short as practical, preserve a continuous ground reference, and avoid placing sensitive logic beneath cable connectors. The driver channels are designed for point-to-point links, so minimize intermediate stubs and branching on cable-side nets.
Do not substitute a receiver or driver for the complete transceiver without reviewing every pin assignment. Verify the number of drivers, number of receivers, logic polarity, supply range, and package drawing in the manufacturer pin-description table. A matching package alone does not establish functional interchangeability, especially when enable, shutdown, or unused-channel treatment differs.
For externally accessible cables, combine the device's ±15 kV ESD capability with appropriate connector-level protection and chassis-grounding strategy. The integrated protection reduces susceptibility to electrostatic discharge, but long cables can also expose the interface to surge events outside that rating. Validate the complete protection network and enclosure grounding in the final equipment.
اطلاعات انطباق
Analog Devices states that the ADM208E family conforms to EIA-232-E and CCITT V.28 and provides ±15 kV ESD protection. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the referenced product information.