Analog Devices

ADM3068EBRZ - 50 Mbps RS-485 Transceiver | Analog Devices

Teilenummer: ADM3068EBRZ ✓ Aktiv
3.0 V to 5.5 V Vdss 14-Lead SOIC_N Package 50 Mbps Speed
MOQ: 1 |

ADM3068EBRZ Übersicht

The Analog Devices ADM3068EBRZ is a 3.0 V to 5.5 V, full-duplex RS-485 transceiver with a 50 Mbps high-speed data rate, 500 kbps low-speed rate, and ±12 kV IEC ESD protection in a 14-lead SOIC_N package. One driver and one receiver provide a complete point-to-point differential bus interface for industrial control, instrumentation, robotics, and data-acquisition equipment.

An RS-485 transceiver is an interface integrated circuit that combines a differential line driver and a differential receiver. It belongs to the RS-485 interface family within the broader category of interface ICs, allowing logic-level UART, SPI, or microcontroller signals to travel across a balanced, noise-resistant cable. Full duplex means the transmitter and receiver can operate simultaneously rather than sharing one bidirectional bus in the same way as half-duplex implementations.

Key electrical features include a 3.0 V to 5.5 V supply range, operation from -40°C to +125°C, and ±12 kV IEC-compliant ESD protection on the bus-facing pins. The device supports both 500 kbps and 50 Mbps communication rates, making it suitable for legacy control networks as well as faster data links. Analog Devices also offers a matching EVAL-ADM3068EEBZ evaluation board with a footprint for the ADM3068EBRZ.

The ADM3068E family combines high-speed differential signaling with integrated protection in several space-saving packages, including 10-lead LFCSP, 8-lead and 10-lead MSOP, and 8-lead and 14-lead SOIC_N options. The 14-lead SOIC_N version provides a conventional surface-mount footprint and 0.154-inch lead pitch, simplifying assembly where very small package types would complicate inspection or manual rework.

Typical uses include industrial sensor networks, motor-control systems, factory automation links, building controls, and test equipment requiring a robust balanced interface. The full-duplex architecture can reduce protocol complexity in point-to-point links because separate transmit and receive paths can be active at the same time.

Designers should follow the pin-description and termination guidance in the manufacturer datasheet, including the requirements for bus biasing, common-mode jumper selection, and cable termination. Place the transceiver close to the connector, route the differential pair as a tightly coupled pair, and provide a low-impedance return path to reduce radiated emissions and susceptibility to external interference.

This page combines manufacturer specifications, package and interface details, sourcing information, and practical RS-485 design guidance to help engineers evaluate the ADM3068EBRZ for industrial and embedded communication links.

Drop-in-Alternativen für ADM3068EBRZ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit ADM3068EBRZ (gleiche Bauform und Footprint) – abweichend in RoHS Status.

Analog Devices
RoHS Status: Compliant
Vergleichen mit ADM3068EBRZ →

ADM3068EARZ

✅ Drop-In
Analog Devices
📦 14-Lead SOIC_N
RS-485 transceiver · 1/1 full duplex · 500 kbps · 50 Mbps · 3.0 V to 5.5 V · 5.5 V · EIA-485 · 14

Preis auf Anfrage

Datenblatt ansehen →

ADM3068EBRZ Technische Daten

Product Type RS-485 Transceiver
Supply Voltage Range 3.0 V to 5.5 V
High-Speed Data Rate 50 Mbps
Low-Speed Data Rate 500 kbps
ESD Protection ±12 kV IEC ESD
Duplex Mode Full Duplex
Number of Drivers 1
Number of Receivers 1
Betriebstemperaturbereich -40°C to +125°C
Package Type 14-Lead SOIC_N
Package Width 3.90 mm
Lead Pitch 0.154 inch
Montagestil SMD/SMT
Packing Method Tube
Evaluation Board EVAL-ADM3068EEBZ
RoHS-Status unknown
REACH Status unknown
AEC-Q100 Qualification unknown

ADM3068EBRZ 3.90 mm Pinbelegungsleitfaden

Pinbelegung für ADM3068EBRZ (3.90 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für ADM3068EBRZ im 3.90 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ADM3068EBRZ.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ADM3068EBRZ ist geeignet für 6 Anwendungs: Industrial Sensor and Controller Networks, Factory Automation Equipment Links, Robotics and Motion Control, Building and HVAC Control Systems, Test and Measurement Data Acquisition, Instrumentation and Process-Control Links.

🏭

Industrial Sensor and Controller Networks

The ADM3068EBRZ fits point-to-point links between industrial controllers, remote sensor nodes, and actuator modules because it provides a 3.0 V to 5.5 V supply range, full-duplex operation, and ±12 kV IEC ESD protection. The 50 Mbps capability permits rapid transfer of sensor batches, configuration data, and diagnostic packets while the 500 kbps rate supports conventional control traffic. Place the transceiver near the field connector, route the differential pair as a coupled pair, and apply the termination and biasing shown in the manufacturer application circuit.

🏭

Factory Automation Equipment Links

Use the ADM3068EBRZ for high-speed communication between PLCs, motion controllers, production stations, and inspection equipment when the physical layer must tolerate industrial electrical noise. Full-duplex operation allows each station to transmit and receive without shared-bus direction arbitration, while the 50 Mbps rate supports dense telemetry and synchronized machine data. Its -40°C to +125°C operating range supports factory-floor temperature extremes, and the ±12 kV IEC ESD rating strengthens protection at exposed cable interfaces.

🤖

Robotics and Motion Control

The ADM3068EBRZ is appropriate for encoder feedback, motor-command feedback, and joint-controller communication links that require deterministic bidirectional transfer. Its 50 Mbps high-speed mode reduces transfer time for position, velocity, and diagnostic information compared with a 500 kbps-only interface. Full-duplex behavior simplifies the physical layer in point-to-point robot connections, while the narrow-body 14-lead SOIC_N package is practical for compact controller boards and automated assembly.

🏠

Building and HVAC Control Systems

The ADM3068EBRZ can connect room controllers, HVAC equipment, dampers, and supervisory panels over balanced RS-485 wiring. The 3.0 V to 5.5 V operating range allows integration with both 3.3 V microcontrollers and 5 V interface circuits, while full-duplex operation supports continuous command exchange and status reporting. The ±12 kV IEC ESD protection is especially useful where internal boards connect to long field cables, although cable routing, grounding, and surge mitigation still require system-level engineering.

📟

Test and Measurement Data Acquisition

The ADM3068EBRZ is useful in instruments that transfer digitized measurements, calibration tables, or configuration data between a host and remote acquisition hardware. A 50 Mbps bus rate can shorten transfer time for large waveform and diagnostic payloads, and the 500 kbps mode accommodates low-rate control traffic. The full-duplex arrangement permits simultaneous status monitoring and command traffic, while the 14-lead SOIC_N package supports conventional PCB assembly and rework processes.

🌐

Instrumentation and Process-Control Links

The ADM3068EBRZ supports communication between process transmitters, analyzers, remote I/O, and a central control unit where reliable differential signaling is required. Its full-duplex configuration reduces contention logic, the 50 Mbps mode handles high-volume process data, and the 500 kbps rate remains available for slower legacy equipment. The -40°C to +125°C range suits many industrial environments, and ±12 kV IEC ESD protection adds a useful layer of ruggedness at externally accessible interfaces.

Zusammenfassung der empfohlenen Produkte

ADM3068EARZ Analog Devices Verwendet in: Industrial Sensor and Controller Networks, Factory Automation Equipment Links, Robotics and Motion Control, Building and HVAC Control Systems, Test and Measurement Data Acquisition, Instrumentation and Process-Control Links EVAL-ADM3068EEBZ Evaluation board with ADM3068EBRZ footprint Verwendet in: Industrial Sensor and Controller Networks, Robotics and Motion Control, Test and Measurement Data Acquisition, Instrumentation and Process-Control Links
What is the ADM3068EBRZ and what is its main data rate?
The ADM3068EBRZ is a single-channel, full-duplex RS-485 transceiver from Analog Devices with a 50 Mbps high-speed communication rate and a 500 kbps low-speed rate. According to the ADM3068E family datasheet, the device combines one differential driver, one differential receiver, a 3.0 V to 5.5 V supply range, and ±12 kV IEC ESD protection. It is supplied in a 14-lead SOIC_N package for surface-mount industrial and instrumentation applications.
What is the operating voltage range of the ADM3068EBRZ?
The ADM3068EBRZ operates from a 3.0 V to 5.5 V supply, making it compatible with both 3.3 V and 5 V logic systems. The Analog Devices ADM3068E datasheet identifies the ADM3068EBRZ as a 14-lead SOIC_N RS-485 transceiver, and the matching EVAL-ADM3068EEBZ board includes a footprint for this device. Confirm the interface signal levels and supply tolerances in the datasheet before designing a new board.
Where can I download the ADM3068EBRZ datasheet PDF?
The ADM3068E family datasheet is available directly from Analog Devices as a PDF and covers the ADM3061E through ADM3068E devices. Use the manufacturer datasheet for the ADM3068EBRZ pin descriptions, recommended application circuit, electrical characteristics, and package drawings. The Analog Devices product page and the EVAL-ADM3068EEBZ user guide provide additional board-level information for evaluating the transceiver.
Where can I find the ADM3068EBRZ pinout?
The ADM3068EBRZ pinout is shown in the pin-description table and package outline of the Analog Devices ADM3068E datasheet. The device has 14 pins in a narrow-body SOIC_N package. Use that table when assigning driver, receiver, supply, ground, common-mode-jumper, and exposed-circuitry connections so each PCB net matches the manufacturer's recommended configuration.
What are the key specifications of the ADM3068EBRZ that engineers should know?
The ADM3068EBRZ provides full-duplex RS-485 operation, a 3.0 V to 5.5 V supply range, 500 kbps and 50 Mbps data-rate operation, and ±12 kV IEC ESD protection. It uses one driver and one receiver in a 14-lead SOIC_N package rated for -40°C to +125°C operation. These characteristics place it between conventional slow RS-485 links and high-speed specialized transceivers.
Is the ADM3068EBRZ full duplex or half duplex?
The ADM3068EBRZ is a full-duplex RS-485 transceiver. Its separate driver and receiver paths permit simultaneous transmission and reception, which is useful for point-to-point links where both ends need immediate access to the bus. This differs from a half-duplex arrangement in which the driver and receiver share a single bus path and require direction-control logic.
What can replace the ADM3068EBRZ on the same PCB footprint?
The closest same-footprint option identified for the ADM3068EBRZ is the Analog Devices ADM3068EARZ, which uses the same 14-lead SOIC_N package and the same ADM3068E transceiver family. Its RS-485 function and 50 Mbps capability match the target, but ordering-code suffixes can identify different temperature, grade, or packing options. Confirm the complete suffix, operating-temperature range, and device status against the manufacturer documentation before substitution.
Is the ADM3068EARZ the same as the ADM3068EBRZ?
The ADM3068EARZ and ADM3068EBRZ belong to the same Analog Devices ADM3068E family and share the 14-lead SOIC_N footprint, but the complete ordering codes should not be assumed to be interchangeable without checking their suffix definitions. A replacement should match the pin configuration, electrical limits, temperature range, ESD rating, packing method, and qualification requirements. The Analog Devices product page is the controlling source for those distinctions.
When should I choose the ADM3068EBRZ instead of a slower RS-485 transceiver?
Choose the ADM3068EBRZ when the link must support high-speed data transfer while retaining full-duplex operation and integrated ESD protection. Its 50 Mbps capability is substantially higher than the 500 kbps operating rate also supported by the family, while the 3.0 V to 5.5 V supply range supports common industrial logic levels. A slower transceiver may be preferable when the application prioritizes cost, low EMI, or legacy compatibility over throughput.
Is the ADM3068EBRZ suitable for industrial automation and factory control systems?
The ADM3068EBRZ is well suited to industrial automation links because it provides ±12 kV IEC ESD protection, full-duplex operation, and an operating temperature range of -40°C to +125°C. These features support controller-to-controller, sensor-hub, and equipment-interface connections exposed to electrically noisy environments. Industrial suitability still depends on the complete system design, including isolation, cable routing, grounding, and regulatory testing.
How much ESD protection does the ADM3068EBRZ provide?
The ADM3068EBRZ provides ±12 kV IEC ESD protection, as specified by Analog Devices for the ADM3068E family. This rating strengthens the bus-facing interface against electrostatic discharge encountered during installation, servicing, and equipment handling. The complete protection configuration, including applicable contact and air-discharge test methods, is defined in the manufacturer datasheet and should be considered alongside connector and enclosure design.
What is the lead time for the ADM3068EBRZ?
The current lead time for the ADM3068EBRZ should be requested through the Request a Quote form on this page. The manufacturer lists the ADM3068E family and an evaluation board that accepts the ADM3068EBRZ, confirming family availability, but production scheduling varies by order quantity and market conditions. Confirm the exact suffix, quantity, and delivery schedule when placing an order.
Is the ADM3068EBRZ in stock and where can I buy it?
Current stock, volume pricing, and scheduled delivery for the ADM3068EBRZ can be requested through the Request a Quote form on this page. Stock status changes by quantity and purchase timing, so it should be confirmed for the exact ordering code rather than assumed from a general family listing. Specify the required quantity, packaging preference, and target date in the request.
What is the price of the ADM3068EBRZ?
The current customer price for the ADM3068EBRZ is presented through the Request a Quote form on this page. Because distributor pricing changes with quantity, availability, and sourcing channel, request a quotation for the exact MPN and required quantity. The form can also be used to confirm packaging, lead time, and production-scheduling information.
How should an RS-485 bus be laid out around the ADM3068EBRZ?
Place the ADM3068EBRZ close to the RS-485 connector, route the differential pair together with a controlled impedance and controlled skew, and keep the pair away from switching nodes and high-current paths. Use the bus termination, common-mode-jumper, and biasing arrangement specified in the Analog Devices ADM3068E datasheet. The manufacturer evaluation board provides a proven platform for checking termination placement, signal integrity, and bus behavior.

Technische Referenzdaten für ADM3068EBRZ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the ADM3068EBRZ for a full-duplex RS-485 link that may need to operate as fast as 50 Mbps and requires ±12 kV IEC ESD protection in a 14-lead SOIC_N footprint. Its 3.0 V to 5.5 V range supports both 3.3 V and 5 V systems, and the 500 kbps rate provides compatibility with slower control traffic. The ADM3068EARZ is the closest identified same-family drop-in option; use it only after confirming the complete ordering code, temperature grade, qualification, and packing requirements. A slower RS-485 transceiver may be preferable for cost-sensitive, low-rate installations, while a different interface type may be appropriate for isolated or non-RS-485 networks. Confirm bus topology, termination, common-mode range, cable characteristics, and ESD strategy in the manufacturer datasheet before finalizing the design.

Vergleich mit Alternativen

Parameter Dieses Produkt ADM3068EARZ
Package 14-Lead SOIC_N 14-Lead SOIC_N - same footprint
Brand Analog Devices Analog Devices
Product Type Full-Duplex RS-485 Transceiver Full-Duplex RS-485 Transceiver
High-Speed Data Rate 50 Mbps 50 Mbps
Low-Speed Data Rate 500 kbps 500 kbps
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V
ESD Protection ±12 kV IEC ESD ±12 kV IEC ESD
Operating Temperature Range -40°C to +125°C -40°C to +125°C
Driver and Receiver Count 1 Driver, 1 Receiver 1 Driver, 1 Receiver
Mounting Style SMD/SMT SMD/SMT

Wichtigste Unterscheidungsmerkmale

  • High-speed full-duplex RS-485 in a 14-lead SOIC package (vs. ADM3068EARZ)
  • Integrated bus-side ESD robustness (vs. ADM3068EARZ)
  • Dual operating-rate capability (vs. ADM3068EARZ)

Designhinweise

Place the ADM3068EBRZ close to the RS-485 connector and route the two bus conductors as a tightly coupled differential pair. Keep the pair away from switching-regulator outputs, relay contacts, and high-current return paths. Follow the manufacturer evaluation-board layout and datasheet guidance for the common-mode jumper, bus termination, and grounding arrangement. These steps reduce radiated emissions and improve noise immunity in industrial environments.

Do not treat the ±12 kV IEC ESD rating as a substitute for surge protection, isolation, or cable design. ESD protection addresses electrostatic discharge, while transients coupled from field wiring can require separate surge-mitigation components. Verify the complete ordering-code suffix, temperature range, termination configuration, and bus-topology limits in the ADM3068E datasheet before releasing a production design.

Use the termination and fail-safe bias network specified for the selected bus topology, and observe the datasheet limits for common-mode voltage and driver loading. For high-speed operation, avoid stubs, maintain a continuous reference plane, and keep connector transitions short. The 50 Mbps capability provides link margin, but it does not compensate for poor cable topology or uncontrolled board-level reflections.

Decouple the 3.0 V to 5.5 V supply close to the device with the capacitance and placement specified in the manufacturer datasheet. Route the return current through the same reference system used by the transceiver, and keep supply noise out of the sensitive receive path. Verify the supply level, startup behavior, and interface thresholds against the selected system voltage rather than assuming 3.3 V or 5 V compatibility for every configuration.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The ±12 kV IEC ESD rating is an interface protection specification rather than an environmental or material-compliance declaration. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration.

Ähnliche Suchanfragen

ADM3068EBRZ datasheet ADM3068EBRZ pinout ADM3068EBRZ datasheet pdf ADM3068EBRZ equivalent ADM3068EBRZ replacement ADM3068EBRZ vs ADM3068EARZ ADM3068EBRZ price ADM3068EBRZ stock Analog Devices ADM3068EBRZ ADM3068EBRZ 50 Mbps transceiver ADM3068EBRZ SOIC-14 footprint ADM3068EBRZ industrial RS-485

Verwandte Bauteile & Begriffe

Analog Devices ADM3068EBRZ ADM3068EARZ EVAL-ADM3068EEBZ ADM3068E RS-485 RS-422 transceiver full duplex differential line driver differential receiver interface IC SOIC_N 14-lead SOIC surface mount IEC ESD protection 50 Mbps 500 kbps industrial automation robotics process control differential pair common-mode jumper bus termination
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen