ADM3222ANZ - 460 kbps 3.3 V RS-232 Transceiver | Analog Devices
Teilenummer: ADM3222ANZ ✓ AktivADM3222ANZ Übersicht
An RS-232 transceiver is an interface IC that translates logic-level signals into RS-232-compatible line levels and converts received line signals back into digital logic. In the broader semiconductor hierarchy, the ADM3222ANZ belongs to the interface IC family and connects host controllers or programmable logic to serial equipment using the EIA-232E and CCITT V.28 signaling conventions.
Key features include a 460 kbps data rate, operation from a single 3.3 V supply, two transmit and two receive channels, 0.1 µF charge-pump capacitors, and low-power shutdown. The Analog Devices ADM3222 datasheet also identifies enhanced ESD protection to IEC 1000-4-2. These characteristics make the device suitable for industrial control links, portable equipment, data acquisition systems, and embedded serial ports that require a compact multi-channel RS-232 interface.
The internal charge-pump topology generates the positive and negative voltages required by RS-232 from the single low-voltage supply. Four external capacitors are required for the voltage doubler and inverter, while the enable and shutdown circuitry supports controlled power management. Because the interface maintains separate transmit and receive channels, two RS-232 ports can be implemented in a compact system.
Typical uses include configuration interfaces for industrial equipment, service and control ports on test systems, communication links between embedded controllers and legacy peripherals, and isolated or multi-port data acquisition equipment. The 460 kbps capability provides ample margin for common asynchronous serial protocols when the attached equipment supports the corresponding line rate.
PCB implementation should place the four charge-pump capacitors close to their associated device pins and preserve the recommended routing around the RS-232 driver outputs. Confirm line protection, cable length, ground-reference strategy, and signal-integrity requirements at the connector because logic-level specifications alone do not determine reliable behavior over an external RS-232 cable.
This product overview organizes the ADM3222ANZ electrical capabilities, package information, sourcing details, interface applications, and design guidance into one engineering reference. It also distinguishes verified drop-in alternatives from parts that differ in package, data rate, supply voltage, or shutdown behavior.
Drop-in-Alternativen für ADM3222ANZ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
ADM3222AN
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →ADM3222ANZ Technische Daten
| Product Type | 2-channel RS-232 transceiver |
| Number of Drivers | 2 channels |
| Number of Receivers | 2 channels |
| Maximum Data Rate | 460 kbps |
| Versorgungsspannung | 3.3 V |
| Charge-Pump Capacitor | 0.1 µF each; 4 external capacitors |
| Interface Standard | EIA-232E |
| Signaling Standard | CCITT V.28 |
| Shutdown Function | Low-power shutdown |
| Enable Control | Yes |
| ESD Protection | IEC 1000-4-2 (801.2) |
| Gehäuse | 18-pin PDIP |
| Montageart | Through-hole |
| RoHS-Status | Compliant |
ADM3222ANZ 18-pin pdip Pinbelegungsleitfaden
Pinbelegung für ADM3222ANZ (18-pin pdip-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für ADM3222ANZ.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ADM3222ANZ ist geeignet für 6 Anwendungs: Industrial Controller Serial Ports, Portable Equipment Data Links, Test and Measurement Control, Data Acquisition Equipment, Embedded Legacy Peripheral Interfaces, Network and Communications Management Ports.
Industrial Controller Serial Ports
The ADM3222ANZ fits industrial controller designs that require two RS-232 channels while operating from a single 3.3 V rail. Its two transmitters and two receivers allow transmit and receive functions to be assigned independently, while the 460 kbps capability supports common asynchronous control protocols. The 18-pin PDIP package simplifies through-hole assembly and prototype rework. Place the four 0.1 µF charge-pump capacitors close to their associated pins, and route the RS-232 outputs toward connector protection components. Because industrial connectors can introduce external transients, the IEC 1000-4-2 ESD rating should be considered as part of the complete interface protection strategy.
Portable Equipment Data Links
The ADM3222ANZ is appropriate for portable equipment that needs a low-voltage, low-power RS-232 interface. Operating from 3.3 V eliminates the need for a separate 5 V RS-232 supply arrangement, and the low-power shutdown function allows the interface to be disabled when it is not needed. The 460 kbps maximum rate is suitable for configuration, status, and diagnostic channels that do not require continuous high-bandwidth transfer. Check the enable and shutdown states against the host firmware so the receiver and transmitter outputs remain in the intended condition during sleep and wake transitions.
Test and Measurement Control
The ADM3222ANZ can provide dual RS-232 channels for test and measurement equipment that exchanges commands and results with a host controller. The 460 kbps rate provides sufficient bandwidth for many serial control protocols, while two transmit and two receive channels support simultaneous or multiplexed instrument interfaces. Its single 3.3 V operation is useful in compact instrument architectures. The external RS-232 connector should have suitable surge and ESD protection, and the PCB should separate charge-pump routing from sensitive input and output nets. Validate the complete interface across cable lengths and grounding arrangements used by the target instrument.
Data Acquisition Equipment
The ADM3222ANZ supports data acquisition units that need to connect a controller to older RS-232 instruments or laboratory peripherals. Two RS-232 channels can serve separate devices when the system requires bidirectional command and measurement paths. The single 3.3 V supply simplifies mixed-signal and embedded power planning, while the 460 kbps rate is well suited to moderate-rate command and result traffic. Use the manufacturer pin description to assign channels consistently across multiple boards, and verify ground continuity between the data acquisition unit and attached equipment before enabling communication.
Embedded Legacy Peripheral Interfaces
The ADM3222ANZ is useful when a modern embedded controller must communicate with a legacy peripheral through an RS-232 port. The low-voltage 3.3 V supply allows the interface to coexist with contemporary control logic, and the 460 kbps capability covers numerous service and configuration protocols. The enable input supports controlled participation in a multi-function device, while shutdown can reduce consumption when the legacy link is inactive. Avoid assuming that all legacy peripherals use the same connector pinout; verify signal polarity, flow control, grounding, and baud-rate limits in the equipment documentation.
Network and Communications Management Ports
The ADM3222ANZ can serve as an auxiliary RS-232 management interface in network and communications equipment. Many systems require a local service port even when the primary data path uses a high-speed network interface. The ADM3222ANZ provides two RS-232 channels at up to 460 kbps from one 3.3 V supply and adds enable and shutdown control for system power management. In an enclosure with external connectors, add appropriate transient protection and maintain a controlled ground strategy. This use is particularly appropriate where a connector-defined RS-232 service channel is required alongside Ethernet or other communication interfaces.
Technische Referenzdaten für ADM3222ANZ – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ADM3222AN |
|---|---|---|
| Package | 18-pin PDIP | 18-pin PDIP |
| Brand | Analog Devices | Analog Devices |
| Maximum Data Rate | 460 kbps | 460 kbps |
| Supply Voltage | 3.3 V | 3.3 V |
| Channel Configuration | 2 transmitter and 2 receiver channels | 2 transmitter and 2 receiver channels |
| Charge-Pump Capacitors | 4 external 0.1 µF capacitors | 4 external 0.1 µF capacitors |
| Shutdown Function | Low-power shutdown | Low-power shutdown |
| Interface Standards | EIA-232E and CCITT V.28 | EIA-232E and CCITT V.28 |
Wichtigste Unterscheidungsmerkmale
- Higher specified data rate than the 230 kbps family baseline (vs. ADM3222AN)
- Two full RS-232 channels in one package (vs. ADM3222AN)
- Single 3.3 V implementation with integrated charge-pump support (vs. ADM3222AN)
Designhinweise
Place the four external 0.1 µF charge-pump capacitors adjacent to their corresponding ADM3222ANZ pins and use the shortest practical ground returns. Keep these high-current charge-pump paths compact and away from sensitive receiver inputs. Follow the Analog Devices datasheet capacitor connection and grounding arrangement because long or shared return paths can increase emitted noise and reduce transient robustness.
Treat the RS-232 connector as an external electromagnetic and ESD entry point. Route driver outputs through appropriately selected protection elements before reaching the connector, maintain a short return path to the interface ground, and avoid narrow stubs. The device's IEC 1000-4-2 ESD capability should be considered together with connector placement, enclosure behavior, and any cable-borne surge requirements rather than as a complete board-level protection solution.
Do not substitute a lower-voltage or lower-data-rate RS-232 device solely because it has a similar 18-pin package. Confirm the complete pin map, supply requirements, charge-pump capacitor connections, enable and shutdown behavior, and RS-232 signal levels in the manufacturer datasheet. Also verify that the system does not expect hardware flow control pins that are not present on the selected ADM3222 configuration.
Compliance-Informationen
RoHS compliance is identified for the ADM3222ANZ. No additional compliance status is assigned.