Analog Devices

ADM3222ANZ - 460 kbps 3.3 V RS-232 Transceiver | Analog Devices

MPN: ADM3222ANZ ✓ Aktif
3.3 V Vdss 18-pin PDIP Package
MOQ: 1 |

ADM3222ANZ Ringkasan

Analog Devices ADM3222ANZ is a two-channel RS-232 transceiver with one driver and one receiver per channel, a maximum data rate of 460 kbps, and a single 3.3 V supply. The device is offered in an 18-pin PDIP package and includes low-power shutdown and enable control. Four external 0.1 µF charge-pump capacitors support its on-chip voltage-doubler and inverter functions.

An RS-232 transceiver is an interface IC that translates logic-level signals into RS-232-compatible line levels and converts received line signals back into digital logic. In the broader semiconductor hierarchy, the ADM3222ANZ belongs to the interface IC family and connects host controllers or programmable logic to serial equipment using the EIA-232E and CCITT V.28 signaling conventions.

Key features include a 460 kbps data rate, operation from a single 3.3 V supply, two transmit and two receive channels, 0.1 µF charge-pump capacitors, and low-power shutdown. The Analog Devices ADM3222 datasheet also identifies enhanced ESD protection to IEC 1000-4-2. These characteristics make the device suitable for industrial control links, portable equipment, data acquisition systems, and embedded serial ports that require a compact multi-channel RS-232 interface.

The internal charge-pump topology generates the positive and negative voltages required by RS-232 from the single low-voltage supply. Four external capacitors are required for the voltage doubler and inverter, while the enable and shutdown circuitry supports controlled power management. Because the interface maintains separate transmit and receive channels, two RS-232 ports can be implemented in a compact system.

Typical uses include configuration interfaces for industrial equipment, service and control ports on test systems, communication links between embedded controllers and legacy peripherals, and isolated or multi-port data acquisition equipment. The 460 kbps capability provides ample margin for common asynchronous serial protocols when the attached equipment supports the corresponding line rate.

PCB implementation should place the four charge-pump capacitors close to their associated device pins and preserve the recommended routing around the RS-232 driver outputs. Confirm line protection, cable length, ground-reference strategy, and signal-integrity requirements at the connector because logic-level specifications alone do not determine reliable behavior over an external RS-232 cable.

This product overview organizes the ADM3222ANZ electrical capabilities, package information, sourcing details, interface applications, and design guidance into one engineering reference. It also distinguishes verified drop-in alternatives from parts that differ in package, data rate, supply voltage, or shutdown behavior.

Alternatif penggantian untuk ADM3222ANZ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

ADM3222AN

✅ Drop-In
Analog Devices
📦 18-pin PDIP
Dual RS-232 transceiver · 2 channels · 2 transmitters · 2 receivers · 460 kbps · 3.3 V · EIA-232E and CCITT V.28 · 0.1 µF each; 4 capacitors required

Kontak untuk harga

Lihat Datasheet →

ADM3222ANZ Spesifikasi

Product Type 2-channel RS-232 transceiver
Number of Drivers 2 channels
Number of Receivers 2 channels
Maximum Data Rate 460 kbps
Tegangan Pemuat 3.3 V
Charge-Pump Capacitor 0.1 µF each; 4 external capacitors
Interface Standard EIA-232E
Signaling Standard CCITT V.28
Shutdown Function Low-power shutdown
Enable Control Yes
ESD Protection IEC 1000-4-2 (801.2)
Paket 18-pin PDIP
Tipe Mounting Through-hole
Status RoHS Compliant

ADM3222ANZ 18-pin pdip Diamant Konfigurasi Panduan

Konfigurasi pin untuk ADM3222ANZ (18-pin pdip pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 18-pin pdip untuk ADM3222ANZ

Tidak ada data diatribut pin yang tersedia untuk ADM3222ANZ.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

ADM3222ANZ cocok untuk 6 aplikasis: Industrial Controller Serial Ports, Portable Equipment Data Links, Test and Measurement Control, Data Acquisition Equipment, Embedded Legacy Peripheral Interfaces, Network and Communications Management Ports.

🏭

Industrial Controller Serial Ports

The ADM3222ANZ fits industrial controller designs that require two RS-232 channels while operating from a single 3.3 V rail. Its two transmitters and two receivers allow transmit and receive functions to be assigned independently, while the 460 kbps capability supports common asynchronous control protocols. The 18-pin PDIP package simplifies through-hole assembly and prototype rework. Place the four 0.1 µF charge-pump capacitors close to their associated pins, and route the RS-232 outputs toward connector protection components. Because industrial connectors can introduce external transients, the IEC 1000-4-2 ESD rating should be considered as part of the complete interface protection strategy.

📱

Portable Equipment Data Links

The ADM3222ANZ is appropriate for portable equipment that needs a low-voltage, low-power RS-232 interface. Operating from 3.3 V eliminates the need for a separate 5 V RS-232 supply arrangement, and the low-power shutdown function allows the interface to be disabled when it is not needed. The 460 kbps maximum rate is suitable for configuration, status, and diagnostic channels that do not require continuous high-bandwidth transfer. Check the enable and shutdown states against the host firmware so the receiver and transmitter outputs remain in the intended condition during sleep and wake transitions.

🔧

Test and Measurement Control

The ADM3222ANZ can provide dual RS-232 channels for test and measurement equipment that exchanges commands and results with a host controller. The 460 kbps rate provides sufficient bandwidth for many serial control protocols, while two transmit and two receive channels support simultaneous or multiplexed instrument interfaces. Its single 3.3 V operation is useful in compact instrument architectures. The external RS-232 connector should have suitable surge and ESD protection, and the PCB should separate charge-pump routing from sensitive input and output nets. Validate the complete interface across cable lengths and grounding arrangements used by the target instrument.

🖥️

Data Acquisition Equipment

The ADM3222ANZ supports data acquisition units that need to connect a controller to older RS-232 instruments or laboratory peripherals. Two RS-232 channels can serve separate devices when the system requires bidirectional command and measurement paths. The single 3.3 V supply simplifies mixed-signal and embedded power planning, while the 460 kbps rate is well suited to moderate-rate command and result traffic. Use the manufacturer pin description to assign channels consistently across multiple boards, and verify ground continuity between the data acquisition unit and attached equipment before enabling communication.

🔧

Embedded Legacy Peripheral Interfaces

The ADM3222ANZ is useful when a modern embedded controller must communicate with a legacy peripheral through an RS-232 port. The low-voltage 3.3 V supply allows the interface to coexist with contemporary control logic, and the 460 kbps capability covers numerous service and configuration protocols. The enable input supports controlled participation in a multi-function device, while shutdown can reduce consumption when the legacy link is inactive. Avoid assuming that all legacy peripherals use the same connector pinout; verify signal polarity, flow control, grounding, and baud-rate limits in the equipment documentation.

🌐

Network and Communications Management Ports

The ADM3222ANZ can serve as an auxiliary RS-232 management interface in network and communications equipment. Many systems require a local service port even when the primary data path uses a high-speed network interface. The ADM3222ANZ provides two RS-232 channels at up to 460 kbps from one 3.3 V supply and adds enable and shutdown control for system power management. In an enclosure with external connectors, add appropriate transient protection and maintain a controlled ground strategy. This use is particularly appropriate where a connector-defined RS-232 service channel is required alongside Ethernet or other communication interfaces.

What is the ADM3222ANZ?
The ADM3222ANZ is a dual-channel RS-232 transceiver with two driver and two receiver channels operating from a single 3.3 V supply. According to the Analog Devices ADM3222 datasheet, it supports data rates up to 460 kbps, uses four external 0.1 µF charge-pump capacitors, and includes enable and low-power shutdown circuitry. It is packaged in an 18-pin PDIP for through-hole PCB assembly.
What is the maximum data rate of ADM3222ANZ?
The ADM3222ANZ supports a maximum data rate of 460 kbps. According to the Analog Devices ADM3222 datasheet, this rate applies to its RS-232 interface implementation and exceeds the 230 kbps figure associated with several closely related devices in the family. The connected UART, cable, connector, and peripheral must also support the selected asynchronous baud rate.
What supply voltage does ADM3222ANZ use?
The ADM3222ANZ operates from a single 3.3 V supply. The Analog Devices ADM3222 datasheet states that four external 0.1 µF charge-pump capacitors generate the bipolar RS-232 line voltages required by EIA-232E signaling. This allows the interface to operate without a separate positive and negative supply rail.
Where can I download the ADM3222ANZ datasheet PDF?
The official Analog Devices ADM3222 product page provides access to the manufacturer datasheet and supporting technical information. The page also links to the ADM3222 family overview, which identifies the ADM3222 as a two-channel RS-232/V.28 interface operating from a single 3.3 V supply. Use the manufacturer documentation for the final pin, electrical, and application information.
Where is the ADM3222ANZ pinout located?
The ADM3222ANZ pinout is shown in the pin-description section of the Analog Devices ADM3222 datasheet. The exact order is the 18-pin PDIP version designated ADM3222ANZ. Use that table when assigning driver inputs, receiver outputs, enable, shutdown, supply, ground, and charge-pump capacitor connections to PCB nets.
Where can I buy ADM3222ANZ online?
The ADM3222ANZ can be requested through the Request a Quote form on this XAIPART product page. The form is the appropriate route for checking current commercial availability, lot conditions, and order handling. Provide the required quantity, package suffix, and target delivery location when submitting the request.
What is the lead time for ADM3222ANZ?
Current lead time for the ADM3222ANZ should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, production scheduling, package configuration, and supply status. Submitting the requested quantity and delivery schedule allows the commercial team to return the most relevant fulfillment information.
Is ADM3222ANZ in stock?
Current stock status for the ADM3222ANZ should be checked through the Request a Quote form on this page. The form supports an inquiry for the exact 18-pin PDIP order code and requested quantity. Avoid treating general marketplace inventory messages as a reservation, and use the quotation response for current availability.
What is the price of ADM3222ANZ?
Current pricing for the ADM3222ANZ is available through the Request a Quote form on this page. Include the required quantity and intended package or shipping configuration so the commercial response reflects the correct line item. Price and availability can change with quantity, supply position, and fulfillment requirements.
What is the difference between ADM3222ANZ and ADM3222AN?
The ADM3222ANZ and ADM3222AN are both Analog Devices 18-PDIP RS-232 interface versions associated with the same family, and both support 460 kbps operation. The available ordering information identifies ADM3222ANZ as the RoHS-compliant product. Confirm the suffix-specific ordering code, temperature grade, and marking directly in the manufacturer datasheet before treating them as interchangeable.
When should I choose ADM3222ANZ instead of ADM3222AN?
Choose ADM3222ANZ when the assembly requires the specifically identified RoHS-compliant 18-PDIP ordering variant. ADM3222AN may be considered only after confirming its suffix-specific grade, markings, and purchasing status. Both devices use the same family-level interface architecture, including 3.3 V operation, two RS-232 channels, enable control, and low-power shutdown.
Is ADM3222ANZ suitable for a two-port RS-232 interface?
Yes, the ADM3222ANZ is suitable for a two-port RS-232 interface because it contains two transmitters and two receivers. According to the Analog Devices ADM3222 datasheet, it also supports data rates up to 460 kbps and includes enable and shutdown control. PCB layout and connector protection must still be designed for the external RS-232 environment.
What can replace the ADM3222ANZ?
The verified same-package alternative identified for the ADM3222ANZ is the Analog Devices ADM3222AN, an 18-PDIP version with the same 460 kbps family architecture. A production substitution should still be checked for suffix-specific temperature grade, compliance, marking, and lifecycle requirements. The device must be mounted on the same 18-pin PDIP footprint and connected with the same pin assignments.
What is the best MAX3222 equivalent for ADM3222ANZ?
The MAX3222 is a functional RS-232 equivalent family member, but it cannot be presented as a verified pin-to-pin drop-in replacement for the ADM3222ANZ because the available cross-reference information does not establish identical 18-pin PDIP pinout, supply behavior, and functional equivalence. Review the manufacturer pinout and operating requirements for each device before selecting a replacement.
What are the key specifications of ADM3222ANZ that engineers should know?
The key ADM3222ANZ specifications are a 460 kbps maximum data rate, 3.3 V single-supply operation, two transmit and two receive channels, four external 0.1 µF charge-pump capacitors, low-power shutdown, and an 18-pin PDIP package. The Analog Devices ADM3222 datasheet also identifies EIA-232E and CCITT V.28 conformity and enhanced ESD protection to IEC 1000-4-2.

Data referensi engineering untuk ADM3222ANZ — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose ADM3222ANZ for a through-hole design that requires two RS-232 channels, operation from a single 3.3 V rail, and data rates up to 460 kbps. It is particularly suitable for embedded controllers, portable equipment, and test systems that need enable and low-power shutdown functions. ADM3222AN is the closest verified same-package alternative because it shares the 18-PDIP footprint, 460 kbps data rate, 3.3 V supply, and dual-channel architecture; check its suffix-specific grade and markings before substitution. Other RS-232 interface families should be considered only after verifying pinout, supply voltage, capacitor requirements, flow-control provisions, and shutdown behavior. Avoid choosing a device merely by package count or protocol label, since the ADM3222ANZ relies on a defined charge-pump network and specific control-pin arrangement.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini ADM3222AN
Package 18-pin PDIP 18-pin PDIP
Brand Analog Devices Analog Devices
Maximum Data Rate 460 kbps 460 kbps
Supply Voltage 3.3 V 3.3 V
Channel Configuration 2 transmitter and 2 receiver channels 2 transmitter and 2 receiver channels
Charge-Pump Capacitors 4 external 0.1 µF capacitors 4 external 0.1 µF capacitors
Shutdown Function Low-power shutdown Low-power shutdown
Interface Standards EIA-232E and CCITT V.28 EIA-232E and CCITT V.28

Diferensiator Kunci

  • Higher specified data rate than the 230 kbps family baseline (vsADM3222AN)
  • Two full RS-232 channels in one package (vsADM3222AN)
  • Single 3.3 V implementation with integrated charge-pump support (vsADM3222AN)

Catatan Desain

Place the four external 0.1 µF charge-pump capacitors adjacent to their corresponding ADM3222ANZ pins and use the shortest practical ground returns. Keep these high-current charge-pump paths compact and away from sensitive receiver inputs. Follow the Analog Devices datasheet capacitor connection and grounding arrangement because long or shared return paths can increase emitted noise and reduce transient robustness.

Treat the RS-232 connector as an external electromagnetic and ESD entry point. Route driver outputs through appropriately selected protection elements before reaching the connector, maintain a short return path to the interface ground, and avoid narrow stubs. The device's IEC 1000-4-2 ESD capability should be considered together with connector placement, enclosure behavior, and any cable-borne surge requirements rather than as a complete board-level protection solution.

Do not substitute a lower-voltage or lower-data-rate RS-232 device solely because it has a similar 18-pin package. Confirm the complete pin map, supply requirements, charge-pump capacitor connections, enable and shutdown behavior, and RS-232 signal levels in the manufacturer datasheet. Also verify that the system does not expect hardware flow control pins that are not present on the selected ADM3222 configuration.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

RoHS compliance is identified for the ADM3222ANZ. No additional compliance status is assigned.

Data disahkan pada: 2026-11-14 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

ADM3222ANZ datasheet ADM3222ANZ pinout ADM3222ANZ datasheet pdf ADM3222ANZ price ADM3222ANZ stock Analog Devices ADM3222ANZ ADM3222ANZ 460 kbps ADM3222ANZ 3.3 V RS-232 ADM3222ANZ 18-PDIP ADM3222ANZ replacement ADM3222ANZ equivalent ADM3222ANZ vs ADM3222AN ADM3222ANZ application circuit ADM3222ANZ RS-232 interface where to buy ADM3222ANZ

Komponen dan Istilah Terkait

Analog Devices ADM3222ANZ ADM3222AN RS-232 transceiver interface IC semiconductor EIA-232E CCITT V.28 IEC 1000-4-2 RoHS 18-pin PDIP PDIP package through-hole package 460 kbps 3.3 V power supply charge-pump capacitor low-power shutdown enable control industrial control portable equipment data acquisition RS-232 port ESD protection
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ