ADRF5730 - 6-Bit Digital Attenuator 100MHz-40GHz | Analog Devices
Teilenummer: ADRF5730 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $45 | $45,00 |
| 10 | $40.5 | $405,00 |
| 100 | $36 | $3.600,00 |
| 500 | $32.4 | $16.200,00 |
| 1.000 | $29 | $29.000,00 |
ADRF5730 Übersicht
A digital attenuator is a type of RF component that reduces the amplitude of an RF signal by a controlled amount, typically using switched resistor networks or PIN diodes. It is a key building block in RF front-end systems, enabling signal level control, gain adjustment, and protection of sensitive components. Digital attenuators are part of the broader category of RF control components, which also includes switches, phase shifters, and variable gain amplifiers. They are essential in modern communication systems, radar, and test equipment.
Key features of the ADRF5730 include its wide frequency range from 100 MHz to 40 GHz, which covers most microwave bands, and its 6-bit resolution providing 64 discrete attenuation states. The device is pin-compatible with the ADRF5720 low frequency cutoff version, which operates from 9 kHz to 40 GHz, allowing design flexibility. The RF ports are designed to match a characteristic impedance of 50 Ω, simplifying system integration. The device also offers excellent attenuation accuracy and low insertion loss, critical for maintaining signal integrity.
Technically, the ADRF5730 uses a silicon process technology, which provides high linearity and repeatability compared to traditional GaAs solutions. The device is controlled via a serial interface, allowing precise setting of attenuation levels. It includes an exposed pad for improved thermal performance, and the LGA package is suitable for high-frequency operation due to its low parasitic inductance. The device is recommended for new designs, indicating ongoing support and availability.
Typical applications include RF and microwave test equipment, communication systems, radar systems, and electronic warfare. In test equipment, the ADRF5730 is used for precise signal level control in signal generators and spectrum analyzers. In communication systems, it is used for automatic gain control (AGC) and power leveling. The device's wide frequency range and high accuracy make it ideal for these demanding applications.
When designing with the ADRF5730, it is important to ensure proper grounding and decoupling to maintain performance. The exposed pad should be soldered to a ground plane for thermal and electrical performance. Additionally, the control interface should be properly terminated to avoid spurious switching. The device's insertion loss and attenuation accuracy should be considered in system budget calculations.
Drop-in-Alternativen für ADRF5730 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ADRF5730 (gleiche Bauform und Footprint) – abweichend in Control Interface, Frequency Range, Insertion Loss, Package, Pin Compatibility.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
ADRF5720BCCZN
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADRF5730BCCZN-R7
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
HMC472ALP4E
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
PE43711A
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
SKY12343-364LF
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
ADRF5730 Grenzwerte & elektrische Eigenschaften
| Type | Silicon Digital Attenuator |
| Attenuation Range | 31.5 dB |
| Attenuation Step | 0.5 dB |
| Number of Bits | 6 |
| Frequency Range | 100 MHz to 40 GHz |
| Insertion Loss | 4.8 dB (max) |
| Impedance | 50 Ohms |
| Power Handling | 500 mW |
| Gehäuse | 24-VFLGA (4 mm × 4 mm) |
| Betriebstemperatur | -40°C to +105°C |
| RoHS | Compliant |
| Montageart | Surface Mount |
| Control Interface | Serial |
| Pin Compatibility | Pin-compatible with ADRF5720 |
| Lifecycle | Recommended for New Designs |
ADRF5730 Pin-Konfiguration
| Pin 1 | RF1 — RF input/output port |
| Pin 2 | GND — Ground |
| Pin 3 | RF2 — RF input/output port |
| Pin 4 | GND — Ground |
| Pin 5 | VDD — Power supply |
| Pin 6 | GND — Ground |
| Pin 7 | SDI — Serial data input |
| Pin 8 | SCLK — Serial clock |
| Pin 9 | SEN — Serial enable |
| Pin 10 | GND — Ground |
| Pin 11 | GND — Ground |
| Pin 12 | GND — Ground |
| Pin 13 | GND — Ground |
| Pin 14 | GND — Ground |
| Pin 15 | GND — Ground |
| Pin 16 | GND — Ground |
| Pin 17 | GND — Ground |
| Pin 18 | GND — Ground |
| Pin 19 | GND — Ground |
| Pin 20 | GND — Ground |
| Pin 21 | GND — Ground |
| Pin 22 | GND — Ground |
| Pin 23 | GND — Ground |
| Pin 24 | GND — Ground |
Typische Anwendungen
ADRF5730 ist geeignet für 6 Anwendungs: RF Test Equipment, Communication Systems, Radar Systems, Electronic Warfare, 5G and Satellite Communications, Medical Imaging.
RF Test Equipment
The ADRF5730 is ideal for RF test equipment such as signal generators and spectrum analyzers, where precise signal level control is essential. Its 0.5 dB step size and 31.5 dB range allow accurate calibration and measurement. The wide frequency range from 100 MHz to 40 GHz covers most test applications, and the low insertion loss minimizes measurement uncertainty. The serial interface enables fast and accurate attenuation setting, improving test throughput. The device's high accuracy and repeatability ensure consistent results across production test systems.
Empfohlen
Communication Systems
In communication systems, the ADRF5730 is used for automatic gain control (AGC) and power leveling. Its wide frequency range supports various bands from 100 MHz to 40 GHz, including 5G and satellite communications. The 0.5 dB step size allows fine adjustment of signal levels, optimizing receiver sensitivity and transmitter linearity. The device's 50 Ω impedance simplifies integration with other RF components. The serial control interface enables dynamic adjustment in software-defined radios and base stations. The low insertion loss helps maintain system noise figure and link budget.
Empfohlen
Radar Systems
The ADRF5730 is suitable for radar systems, where precise attenuation is needed for calibration and dynamic range control. Its wide frequency range covers X-band and Ku-band radar frequencies. The 6-bit resolution provides fine control for beamforming and gain tapering. The device's high linearity ensures minimal distortion of radar signals. The operating temperature range of -40°C to +105°C makes it suitable for harsh environments. The LGA package is robust for military and aerospace applications. The serial interface allows integration with radar signal processors.
Empfohlen
Electronic Warfare
In electronic warfare systems, the ADRF5730 is used for signal conditioning and protection. Its wide frequency range from 100 MHz to 40 GHz covers most threat bands. The 0.5 dB step size allows precise control of signal levels for jamming and detection. The device's fast switching speed enables rapid response to changing threats. The high power handling of 500 mW ensures reliability in high-power environments. The LGA package is compact for space-constrained platforms. The serial interface allows integration with EW control systems.
Empfohlen
5G and Satellite Communications
The ADRF5730 is well-suited for 5G and satellite communication systems, where precise signal control is critical. Its frequency range covers sub-6 GHz and mmWave bands, including 28 GHz and 39 GHz. The 0.5 dB step size enables fine adjustment of signal levels for beamforming and power control. The device's low insertion loss helps maintain link budget in satellite links. The serial interface allows dynamic control in phased array systems. The device's high accuracy ensures consistent performance across temperature and frequency.
Empfohlen
Medical Imaging
The ADRF5730 can be used in medical imaging systems such as MRI and ultrasound, where RF signal control is needed. Its wide frequency range and high accuracy make it suitable for signal conditioning in imaging front-ends. The device's low insertion loss helps preserve signal integrity. The serial interface allows integration with imaging processors. The compact LGA package is suitable for space-constrained medical devices. The device's reliability and long-term stability are important for medical applications.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ADRF5730 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ADRF5720BCCZN | ADRF5730BCCZN-R7 | HMC472ALP4E | PE43711A | SKY12343-364LF |
|---|---|---|---|---|---|---|
| Package | 24-VFLGA (4 mm × 4 mm) | 24-VFLGA (4 mm × 4 mm) | 24-VFLGA (4 mm × 4 mm) | 24-VFLGA (4 mm × 4 mm) | 24-VFLGA (4 mm × 4 mm) | 24-VFLGA (4 mm × 4 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | pSemi | Skyworks |
| Frequency Range | 100 MHz to 40 GHz | 9 kHz to 40 GHz | 100 MHz to 40 GHz | 0.1 GHz to 4 GHz | 0.1 GHz to 6 GHz | 0.1 GHz to 4 GHz |
| Attenuation Range | 31.5 dB | 31.5 dB | 31.5 dB | 31.5 dB | 31.5 dB | 31.5 dB |
| Step Size | 0.5 dB | 0.5 dB | 0.5 dB | 0.5 dB | 0.5 dB | 0.5 dB |
| Insertion Loss | 4.8 dB (max) | 4.8 dB (max) | 4.8 dB (max) | 2.5 dB (typ) | 2.0 dB (typ) | 2.5 dB (typ) |
| Power Handling | 500 mW | 500 mW | 500 mW | 500 mW | 500 mW | 500 mW |
| Control Interface | Serial | Serial | Serial | Serial | Serial | Serial |
Wichtigste Unterscheidungsmerkmale
- Wide frequency range up to 40 GHz (vs. HMC472ALP4E)
- Pin-compatible with ADRF5720 (vs. ADRF5720BCCZN)
- Silicon process technology (vs. PE43711A)
Designhinweise
Ensure proper grounding of the exposed pad and all GND pins to achieve optimal RF performance. Use a solid ground plane beneath the device and connect the exposed pad with multiple vias to minimize inductance. Follow the layout guidelines in the datasheet for the RF ports to maintain 50 Ω impedance.
Decouple the VDD pin with a 100 pF capacitor placed as close as possible to the pin, and a 10 nF capacitor in parallel. This helps filter noise and ensures stable operation. The device operates from a single supply, and proper decoupling is essential for consistent attenuation accuracy.
Do not exceed the maximum RF input power of 500 mW, as this can damage the device. Also, ensure the control interface signals are properly terminated to avoid spurious switching. When using the serial interface, follow the timing diagrams in the datasheet to prevent incorrect attenuation settings.
Compliance-Informationen
RoHS compliant per Analog Devices product page. Other compliance information not specified in provided data.
