Texas Instruments

ADS1201UG4 - 24-Bit 1 kSPS Delta-Sigma ADC | Texas Instruments

Teilenummer: ADS1201UG4 ✗ Abgekündigt
4.75 V to 5.25 V Vdss 16-SOIC (0.295 inch, 7.50 mm width) Package
MOQ: 1 |

ADS1201UG4 Übersicht

The Texas Instruments ADS1201UG4 is a 24-bit, 1 kSPS delta-sigma modulator ADC with a serial interface, supplied in a 16-pin SOIC package. It operates from 4.75 V to 5.25 V and is designed for precision signal conversion where high resolution, low power consumption, and compact implementation are more important than high-speed sampling. The industrial-temperature device uses a 0.295-inch, 7.50 mm-wide gull-wing package.

A delta-sigma ADC is a type of analog-to-digital converter that oversamples its input and uses digital filtering and noise shaping to deliver high effective resolution. Within the data-converter hierarchy, the ADS1201UG4 combines a sigma-delta modulator with an integrated digital filter, making it suitable for sensors and instrumentation signals that can be sampled at relatively low rates. Its serial output reduces the number of PCB traces required in space-constrained designs.

The principal characteristics are 24-bit nominal resolution, a 1 kSPS maximum sampling rate, a serial interface, and a single 4.75 V to 5.25 V analog supply range. These specifications suit bridge sensors, pressure transducers, temperature measurement systems, and other slowly changing analog signals. The industrial temperature grade supports use across extended commercial and industrial ambient conditions when the complete circuit is designed for the same environmental range.

Technically, the converter prioritizes effective resolution and noise performance rather than conversion latency or multiplexing. A 1 kSPS conversion rate is sufficient for many instrumentation, weighing, process-control, and low-frequency sensor applications. The serial interface allows the converter to communicate with a microcontroller or digital signal controller while keeping the external footprint compact. Designers should treat the ADC as a precision measurement element whose usable accuracy also depends on reference quality, input conditioning, grounding, and digital filtering.

Typical uses include industrial pressure and flow instrumentation, strain-gauge and load-cell signal chains, temperature measurement, low-frequency vibration monitoring, and embedded data-acquisition systems. The device can reduce the need for a separate low-noise front end when the input bandwidth is appropriately limited. Its 16-pin SOIC package also simplifies assembly compared with leadless packages requiring a thermal-pad land pattern.

The principal design consideration is power-supply cleanliness. A 5 V analog rail should be decoupled close to the supply pins, the analog and digital return paths should be managed carefully, and the voltage reference must remain stable throughout measurement. Follow the pin-description and layout guidance in the manufacturer datasheet when assigning nets and grounding the exposed system board.

This page combines the exact ADS1201UG4 package and conversion characteristics, procurement guidance, lifecycle context, replacement considerations, and practical PCB design notes to help engineers evaluate this precision delta-sigma ADC before integrating it into a measurement design.

Drop-in-Alternativen für ADS1201UG4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

ADS1201UG4 Grenzwerte & elektrische Eigenschaften

Converter Type Delta-sigma modulator ADC
Auflösung 24 bit
Maximum Sampling Rate 1 kSPS
Input Supply Voltage Range 4.75 V to 5.25 V
Nominal Supply Voltage 5 V
Schnittstelle Serial
Gehäuse 16-SOIC (0.295 inch, 7.50 mm width)
Package Code SOP
Terminal Count 16
Terminal Form Gull wing
Package Shape Rectangular
Temperature Grade Industrial
Montageart Surface mount
Shipping Form Tube
RoHS-Status ROHS3 compliant

ADS1201UG4 rectangular Pinbelegungsleitfaden

Pinbelegung für ADS1201UG4 (rectangular-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für ADS1201UG4 im rectangular-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ADS1201UG4.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ADS1201UG4 ist geeignet für 6 Anwendungs: Industrial Pressure Transmitters, Load Cell and Weighing Systems, Temperature Measurement Systems, Low-Frequency Vibration Monitoring, Process Flow and Level Instrumentation, Embedded Data Acquisition.

🏭

Industrial Pressure Transmitters

The ADS1201UG4 fits slow-changing pressure signals from resistive bridge sensors because its 24-bit nominal resolution and 1 kSPS conversion rate emphasize precision rather than waveform speed. It can sit behind the bridge excitation and analog front end as the final quantization stage. The 4.75 V to 5.25 V operating range fits 5 V industrial instrumentation, while the 16-pin SOIC is straightforward to assemble. Overall system accuracy will also depend on bridge excitation stability, reference accuracy, input filtering, and protection from sensor wiring transients.

⚖️

Load Cell and Weighing Systems

The ADS1201UG4 is appropriate for weighing platforms, force sensors, and compact industrial scales whose mechanical response is slow compared with the 1 kSPS conversion limit. Its 24-bit resolution provides a useful starting point for extracting small bridge imbalance voltages without sacrificing compactness. Designers should place a low-noise instrumentation amplifier or suitable analog front end between the load cell and converter, then use filtering and calibration to remove offset, gain, and drift errors. The serial interface simplifies connection to a display or controller.

🌡️

Temperature Measurement Systems

The ADS1201UG4 can digitize slow temperature signals from RTDs, thermistors, or thermocouple instrumentation circuits when the required measurement bandwidth is below 1 kSPS. Its high nominal resolution supports systems that need fine resolution over a restricted range, although the real accuracy is governed by sensor linearity, cold-junction compensation, input excitation, and reference stability. The 16-pin SOIC package allows the converter to be placed near the analog sensor circuitry, reducing sensitivity to board-level noise when grounding and decoupling follow the manufacturer layout guidance.

🏭

Low-Frequency Vibration Monitoring

The ADS1201UG4 is suitable for condition-monitoring systems that measure low-frequency vibration or displacement rather than high-bandwidth acoustic waveforms. A 1 kSPS conversion rate can capture changes in machine state, shaft position, or structural vibration when the useful signal bandwidth remains well below the Nyquist limit. The analog front end must provide gain, anti-alias filtering, and input protection appropriate for the transducer. Digital processing can then perform frequency analysis without requiring a high-speed ADC in the signal path.

🛢️

Process Flow and Level Instrumentation

The ADS1201UG4 can serve as the digitization stage for differential pressure, liquid-level, and flow measurements whose sensor outputs change gradually compared with the 1 kSPS sampling limit. Its 24-bit nominal resolution is useful when the system must preserve fine changes around a calibrated operating point. Practical implementation requires a differential analog front end, reference with low drift, input overvoltage protection, and careful grounding. The serial interface allows the converter to connect to a microcontroller responsible for compensation, alarms, and communications.

🖥️

Embedded Data Acquisition

The ADS1201UG4 is useful in compact data-acquisition modules that monitor one or more slowly changing analog channels through a dedicated serial interface. Its 16-pin SOIC package consumes less board area than many leadless options and simplifies hand or automated assembly. A suitable multiplexing strategy can extend channel count when the signals have compatible bandwidth and settling requirements. The design must budget conversion time for synchronization, reference buffering, input settling, and digital filtering, especially when multiplexing sensors with large source impedances.

Zusammenfassung der empfohlenen Produkte

ADS1201UG4 Texas Instruments Verwendet in: Industrial Pressure Transmitters, Load Cell and Weighing Systems, Temperature Measurement Systems, Low-Frequency Vibration Monitoring, Process Flow and Level Instrumentation, Embedded Data Acquisition ADS1204 Texas Instruments delta-sigma converter family option Verwendet in: Industrial Pressure Transmitters, Temperature Measurement Systems, Embedded Data Acquisition ADS1209 Texas Instruments precision converter family option Verwendet in: Load Cell and Weighing Systems, Process Flow and Level Instrumentation ADS1252U Texas Instruments Verwendet in: Low-Frequency Vibration Monitoring
Where can I buy the ADS1201UG4?
The ADS1201UG4 can be requested through the “Request a Quote” form on this product page. The form supports an inquiry for the exact Texas Instruments part number, tube packaging, quantity, and required delivery schedule. Because lifecycle and inventory status can change, buyers should include the target quantity and any date-sensitive production requirements in the request rather than assuming a historical listing reflects current availability.
What is the price of the ADS1201UG4?
Current commercial pricing for the ADS1201UG4 is handled through the “Request a Quote” form on this page. The request should specify the required quantity, tube packaging, destination, and expected delivery date. The ADS1201UG4 is an obsolete device, so procurement teams should verify lifecycle status, lot traceability, and authorized-channel documentation before committing it to a new production design.
What is the lead time for the ADS1201UG4?
Lead time for the ADS1201UG4 should be confirmed through the “Request a Quote” form on this page. The manufacturer’s lifecycle information identifies the ADS1201 family as obsolete, so new production demand may involve remaining-channel inventory rather than a normal active-production schedule. Include the required quantity, date code requirements, and inspection requirements so the supplier can return a meaningful lead-time commitment.
Is the ADS1201UG4 in stock?
Current ADS1201UG4 stock should be confirmed through the “Request a Quote” form on this page. Marketplace snippets may reflect historical inventory rather than a live, guaranteed allocation, particularly for this obsolete precision ADC. Buyers should request quantity confirmation and traceable lot information. For a new design, also request an active replacement recommendation rather than relying on an uncontrolled stock allocation.
What are the key specifications of the ADS1201UG4?
The ADS1201UG4 is a 24-bit, 1 kSPS delta-sigma modulator ADC with a serial interface and a 4.75 V to 5.25 V supply range. According to the manufacturer datasheet, the device is packaged in a 16-pin SOIC measuring 0.295 inch, or 7.50 mm, in width. Its industrial temperature grade and surface-mount construction suit precision measurement equipment requiring high nominal resolution rather than high-speed conversion.
What is the ADS1201UG4 used for?
The ADS1201UG4 is used for precision conversion of low-frequency analog sensor signals, including pressure, temperature, load, and process-control measurements. Its 24-bit resolution and 1 kSPS sampling rate favor stable instrumentation signals over fast-changing waveforms. The manufacturer datasheet identifies it as a delta-sigma modulator ADC, so input bandwidth, filtering, reference stability, and front-end noise determine the practical accuracy of the complete measurement chain.
What is the operating voltage of the ADS1201UG4?
The ADS1201UG4 operates from 4.75 V to 5.25 V. According to the manufacturer datasheet, the range corresponds to a nominal 5 V analog supply, with 4.75 V and 5.25 V defining the specified operating limits. The supply should be decoupled near the device, and the reference and input circuits must remain within their corresponding absolute-maximum ratings during power-up, shutdown, and fault conditions.
What resolution and sampling rate does the ADS1201UG4 provide?
The ADS1201UG4 provides 24-bit resolution and a maximum sampling rate of 1 kSPS. According to the manufacturer datasheet, it is a single-channel delta-sigma modulator ADC using a serial output interface. This combination is appropriate for slow sensor signals where effective resolution is valuable, but it is not intended for waveforms requiring megahertz-class sampling or minimal conversion latency.
Where can I download the ADS1201UG4 datasheet PDF?
The ADS1201UG4 manufacturer datasheet can be opened through the datasheet link on this page. It is the appropriate document for confirming the electrical characteristics, pin descriptions, supply requirements, interface timing, recommended application circuit, and package drawings. Engineers should use the manufacturer document rather than a marketplace summary when assigning PCB nets or calculating measurement performance.
Where can I find the ADS1201UG4 pinout?
The ADS1201UG4 pinout is documented in the pin-configuration section of the manufacturer datasheet. The device uses a 16-pin SOIC, and the numbered package drawing should be used alongside the electrical tables when assigning analog inputs, supply pins, reference connections, ground returns, and serial-interface signals. Use the manufacturer’s numbering diagram to avoid errors caused by differences in package drawing style.
ADS1201UG4 vs ADS1201U/1KG4 — which is the better choice?
The ADS1201UG4 and ADS1201U/1KG4 are identified as the same 24-bit, 1 kSPS, 16-pin SOIC ADS1201 device in different ordering or packaging forms. The functional choice is therefore driven by assembly method, current procurement conditions, and traceability requirements rather than a change in nominal resolution or conversion rate. Compare the exact suffix, package orientation, tube or reel handling, and lot documentation before approving either ordering code.
ADS1201UG4 vs ADS1252U — which is better for precision measurement?
The ADS1201UG4 and ADS1252U are both precision Texas Instruments data converters, but their sampling-rate classes and package details determine the appropriate use. The ADS1201UG4 is specified at 24 bits and 1 kSPS in a 16-pin SOIC, while the ADS1252U belongs to a different converter family with different performance and package characteristics. Select by required bandwidth, conversion speed, digital interface, and PCB footprint rather than by nominal resolution alone.
When should I choose the ADS1201UG4 for a new design?
Choose the ADS1201UG4 for a new design only when the 24-bit, 1 kSPS measurement bandwidth, 16-pin SOIC footprint, and serial interface satisfy the system requirements and the lifecycle status is acceptable for the production plan. For new industrial or consumer programs, an active converter is generally preferable. The ADS1201UG4 is more appropriate for repair, qualification continuity, or controlled legacy production where the exact device is required.
Is the ADS1201UG4 suitable for a pressure transmitter?
The ADS1201UG4 is suitable for many slow-changing pressure-transmitter signals when the required bandwidth is below 1 kSPS and the circuit can achieve the required noise performance. Its 24-bit nominal resolution is well matched to bridge-based pressure sensing, while the 4.75 V to 5.25 V supply range suits 5 V instrumentation. Input excitation, reference accuracy, filtering, and front-end protection remain essential to the final accuracy.
What can replace the ADS1201UG4?
A replacement must be selected by input range, reference voltage, effective resolution, sampling rate, digital interface, pinout, package, and lifecycle status—not by the “24-bit ADC” label alone. The ADS1201U/1KG4 is an ordering and packaging counterpart of the target, while ADS1204 and ADS1209 are other members discussed in the manufacturer’s substitution guidance. Use the “Request a Quote” form on this page to request a verified replacement and current sourcing assessment.
Is the ADS1201UG4 the same as ADS1201U/1KG4?
The ADS1201UG4 and ADS1201U/1KG4 are functionally equivalent ADS1201 ordering variants with a single-channel, 24-bit, 1 kSPS delta-sigma ADC and a 16-pin SOIC. Their listed electrical characteristics are consistent, although the suffix controls ordering and packaging details. Confirm the exact package orientation and procurement format before treating one as a substitute for a tube-mounted or reel-mounted production line.
What is the best cross-brand equivalent for the ADS1201UG4?
No cross-brand drop-in equivalent for the ADS1201UG4 is established by the available substitution records. A valid cross-brand replacement would need the same 16-pin SOIC footprint, pin-to-pin signal arrangement, compatible 4.75 V to 5.25 V supply, reference interface, serial protocol, and comparable 24-bit, 1 kSPS performance. Submit the required electrical and mechanical criteria through the “Request a Quote” form on this page for a controlled substitution review.

Technische Referenzdaten für ADS1201UG4 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the ADS1201UG4 when a controlled legacy system specifically requires a 24-bit, 1 kSPS Texas Instruments delta-sigma modulator ADC in a 16-pin SOIC with a 4.75 V to 5.25 V supply. Its nominal resolution is suitable for slow bridge, pressure, temperature, force, and low-frequency vibration measurements, and its serial interface simplifies connection to embedded controllers. For new production programs, favor an active converter because the ADS1201 family is obsolete. The ADS1201U/1KG4 is the closest ordering counterpart when its packaging and traceability requirements fit the assembly line. ADS1204, ADS1209, and ADS1252U belong to related decision points, but they must be evaluated separately for exact pinout, package, sampling rate, interface, and lifecycle requirements rather than treated as automatic drop-in replacements.

Vergleich mit Alternativen

Parameter Dieses Produkt
Brand Texas Instruments
Package 16-SOIC (0.295 inch, 7.50 mm width)
Converter Type Delta-sigma modulator ADC
Resolution 24 bit
Maximum Sampling Rate 1 kSPS
Interface Serial
Supply Voltage Range 4.75 V to 5.25 V
Temperature Grade Industrial
Mounting Type Surface mount
RoHS Status ROHS3 compliant

Designhinweise

Place the input, reference, and supply bypass capacitors directly beside their associated pins, and route high-impedance analog traces away from digital clock and serial-interface lines. The manufacturer datasheet pin configuration and application layout should determine whether the analog and digital grounds meet at the device, beneath the converter, or at another intentional point. Keep the converter close to the front end to minimize board-level noise pickup and provide a low-impedance ground reference.

Use a clean 5 V source within the 4.75 V to 5.25 V operating range. Verify startup and shutdown sequencing so the supply remains within absolute-maximum limits at every stage. The reference network must also remain stable because reference error contributes directly to gain error. Confirm output settling and filtering behavior at the selected digital-filter setting, particularly in multiplexed systems where the sensor source impedance may require additional acquisition time.

Do not interpret 24-bit nominal resolution as guaranteed 24-bit total accuracy. Offset, gain error, nonlinearity, reference drift, analog noise, and incomplete input settling can reduce usable resolution. Select the converter mode and digital filter for the actual signal bandwidth, allow the front end to settle before conversion, and include calibration in the production design. An anti-alias filter is essential when the analog input contains frequencies above the retained measurement bandwidth.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The product listing identifies the ADS1201UG4 as ROHS3 compliant. No qualifying AEC-Q100 designation, REACH declaration, halogen-free statement, lead-free statement, or conflict-minerals declaration was identified.

Daten verifiziert am: 2026-11-14 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

ADS1201UG4 datasheet ADS1201UG4 pinout ADS1201UG4 datasheet pdf ADS1201UG4 equivalent ADS1201UG4 replacement ADS1201UG4 cross reference ADS1201UG4 vs ADS1252U ADS1201UG4 SOIC-16 ADS1201UG4 application circuit Texas Instruments ADS1201UG4 ADS1201UG4 price ADS1201UG4 stock

Verwandte Bauteile & Begriffe

Texas Instruments ADS1201UG4 ADS1201U/1KG4 ADS1204 ADS1209 ADS1252U delta-sigma ADC analog-to-digital converter data converter integrated circuit semiconductor 24-bit resolution 1 kSPS sampling rate serial interface 16-pin SOIC SOIC package family surface-mount package SMD precision measurement pressure sensor load cell temperature measurement low-frequency vibration monitoring RoHS industrial temperature grade
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen