ADS1201UG4 - 24-Bit 1 kSPS Delta-Sigma ADC | Texas Instruments
Référence : ADS1201UG4 ✗ Fin de vieADS1201UG4 Présentation
A delta-sigma ADC is a type of analog-to-digital converter that oversamples its input and uses digital filtering and noise shaping to deliver high effective resolution. Within the data-converter hierarchy, the ADS1201UG4 combines a sigma-delta modulator with an integrated digital filter, making it suitable for sensors and instrumentation signals that can be sampled at relatively low rates. Its serial output reduces the number of PCB traces required in space-constrained designs.
The principal characteristics are 24-bit nominal resolution, a 1 kSPS maximum sampling rate, a serial interface, and a single 4.75 V to 5.25 V analog supply range. These specifications suit bridge sensors, pressure transducers, temperature measurement systems, and other slowly changing analog signals. The industrial temperature grade supports use across extended commercial and industrial ambient conditions when the complete circuit is designed for the same environmental range.
Technically, the converter prioritizes effective resolution and noise performance rather than conversion latency or multiplexing. A 1 kSPS conversion rate is sufficient for many instrumentation, weighing, process-control, and low-frequency sensor applications. The serial interface allows the converter to communicate with a microcontroller or digital signal controller while keeping the external footprint compact. Designers should treat the ADC as a precision measurement element whose usable accuracy also depends on reference quality, input conditioning, grounding, and digital filtering.
Typical uses include industrial pressure and flow instrumentation, strain-gauge and load-cell signal chains, temperature measurement, low-frequency vibration monitoring, and embedded data-acquisition systems. The device can reduce the need for a separate low-noise front end when the input bandwidth is appropriately limited. Its 16-pin SOIC package also simplifies assembly compared with leadless packages requiring a thermal-pad land pattern.
The principal design consideration is power-supply cleanliness. A 5 V analog rail should be decoupled close to the supply pins, the analog and digital return paths should be managed carefully, and the voltage reference must remain stable throughout measurement. Follow the pin-description and layout guidance in the manufacturer datasheet when assigning nets and grounding the exposed system board.
This page combines the exact ADS1201UG4 package and conversion characteristics, procurement guidance, lifecycle context, replacement considerations, and practical PCB design notes to help engineers evaluate this precision delta-sigma ADC before integrating it into a measurement design.
Alternatives de remplacement direct pour ADS1201UG4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesADS1201UG4 Valeurs maximales et caractéristiques électriques
| Converter Type | Delta-sigma modulator ADC |
| Résolution | 24 bit |
| Maximum Sampling Rate | 1 kSPS |
| Input Supply Voltage Range | 4.75 V to 5.25 V |
| Nominal Supply Voltage | 5 V |
| Interface | Serial |
| Boîtier | 16-SOIC (0.295 inch, 7.50 mm width) |
| Package Code | SOP |
| Terminal Count | 16 |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Industrial |
| Type de montage | Surface mount |
| Shipping Form | Tube |
| Statut RoHS | ROHS3 compliant |
Guide de configuration des broches du ADS1201UG4 rectangular
Configuration des broches du ADS1201UG4 (boîtier rectangular). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour ADS1201UG4.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ADS1201UG4 convient pour 6 applications: Industrial Pressure Transmitters, Load Cell and Weighing Systems, Temperature Measurement Systems, Low-Frequency Vibration Monitoring, Process Flow and Level Instrumentation, Embedded Data Acquisition.
Industrial Pressure Transmitters
The ADS1201UG4 fits slow-changing pressure signals from resistive bridge sensors because its 24-bit nominal resolution and 1 kSPS conversion rate emphasize precision rather than waveform speed. It can sit behind the bridge excitation and analog front end as the final quantization stage. The 4.75 V to 5.25 V operating range fits 5 V industrial instrumentation, while the 16-pin SOIC is straightforward to assemble. Overall system accuracy will also depend on bridge excitation stability, reference accuracy, input filtering, and protection from sensor wiring transients.
Recommandé
Load Cell and Weighing Systems
The ADS1201UG4 is appropriate for weighing platforms, force sensors, and compact industrial scales whose mechanical response is slow compared with the 1 kSPS conversion limit. Its 24-bit resolution provides a useful starting point for extracting small bridge imbalance voltages without sacrificing compactness. Designers should place a low-noise instrumentation amplifier or suitable analog front end between the load cell and converter, then use filtering and calibration to remove offset, gain, and drift errors. The serial interface simplifies connection to a display or controller.
Recommandé
Temperature Measurement Systems
The ADS1201UG4 can digitize slow temperature signals from RTDs, thermistors, or thermocouple instrumentation circuits when the required measurement bandwidth is below 1 kSPS. Its high nominal resolution supports systems that need fine resolution over a restricted range, although the real accuracy is governed by sensor linearity, cold-junction compensation, input excitation, and reference stability. The 16-pin SOIC package allows the converter to be placed near the analog sensor circuitry, reducing sensitivity to board-level noise when grounding and decoupling follow the manufacturer layout guidance.
Recommandé
Low-Frequency Vibration Monitoring
The ADS1201UG4 is suitable for condition-monitoring systems that measure low-frequency vibration or displacement rather than high-bandwidth acoustic waveforms. A 1 kSPS conversion rate can capture changes in machine state, shaft position, or structural vibration when the useful signal bandwidth remains well below the Nyquist limit. The analog front end must provide gain, anti-alias filtering, and input protection appropriate for the transducer. Digital processing can then perform frequency analysis without requiring a high-speed ADC in the signal path.
Recommandé
Process Flow and Level Instrumentation
The ADS1201UG4 can serve as the digitization stage for differential pressure, liquid-level, and flow measurements whose sensor outputs change gradually compared with the 1 kSPS sampling limit. Its 24-bit nominal resolution is useful when the system must preserve fine changes around a calibrated operating point. Practical implementation requires a differential analog front end, reference with low drift, input overvoltage protection, and careful grounding. The serial interface allows the converter to connect to a microcontroller responsible for compensation, alarms, and communications.
Recommandé
Embedded Data Acquisition
The ADS1201UG4 is useful in compact data-acquisition modules that monitor one or more slowly changing analog channels through a dedicated serial interface. Its 16-pin SOIC package consumes less board area than many leadless options and simplifies hand or automated assembly. A suitable multiplexing strategy can extend channel count when the signals have compatible bandwidth and settling requirements. The design must budget conversion time for synchronization, reference buffering, input settling, and digital filtering, especially when multiplexing sensors with large source impedances.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ADS1201UG4 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | Texas Instruments |
| Package | 16-SOIC (0.295 inch, 7.50 mm width) |
| Converter Type | Delta-sigma modulator ADC |
| Resolution | 24 bit |
| Maximum Sampling Rate | 1 kSPS |
| Interface | Serial |
| Supply Voltage Range | 4.75 V to 5.25 V |
| Temperature Grade | Industrial |
| Mounting Type | Surface mount |
| RoHS Status | ROHS3 compliant |
Notes de conception
Place the input, reference, and supply bypass capacitors directly beside their associated pins, and route high-impedance analog traces away from digital clock and serial-interface lines. The manufacturer datasheet pin configuration and application layout should determine whether the analog and digital grounds meet at the device, beneath the converter, or at another intentional point. Keep the converter close to the front end to minimize board-level noise pickup and provide a low-impedance ground reference.
Use a clean 5 V source within the 4.75 V to 5.25 V operating range. Verify startup and shutdown sequencing so the supply remains within absolute-maximum limits at every stage. The reference network must also remain stable because reference error contributes directly to gain error. Confirm output settling and filtering behavior at the selected digital-filter setting, particularly in multiplexed systems where the sensor source impedance may require additional acquisition time.
Do not interpret 24-bit nominal resolution as guaranteed 24-bit total accuracy. Offset, gain error, nonlinearity, reference drift, analog noise, and incomplete input settling can reduce usable resolution. Select the converter mode and digital filter for the actual signal bandwidth, allow the front end to settle before conversion, and include calibration in the production design. An anti-alias filter is essential when the analog input contains frequencies above the retained measurement bandwidth.
Informations de conformité
The product listing identifies the ADS1201UG4 as ROHS3 compliant. No qualifying AEC-Q100 designation, REACH declaration, halogen-free statement, lead-free statement, or conflict-minerals declaration was identified.