Texas Instruments

ADS1212UG4 - 22-Bit Delta-Sigma ADC | Texas Instruments

Teilenummer: ADS1212UG4 ✓ Aktiv
+5 V Vdss 18-pin SOP Package
MOQ: 1 |

ADS1212UG4 Übersicht

The Texas Instruments ADS1212UG4 is a precision 22-bit delta-sigma analog-to-digital converter with one differential input channel, a 6.25 kSPS conversion rate, and a single +5 V supply. The device is offered in an 18-pin SOP package and combines programmable gain, low power consumption, and an SPI-compatible serial interface for precision measurement systems.

A delta-sigma analog-to-digital converter is an ADC category that uses oversampling, noise shaping, and digital filtering to provide high resolution and excellent noise performance. The ADS1212 belongs to the broader ADC and data-converter hierarchy, where its differential input architecture helps reject common-mode noise when measuring low-level signals from sensors, bridges, strain gauges, and transducers. Its internal digital filter provides a conventional conversion result while the serial interface transfers data to a controller.

The manufacturer describes 22-bit resolution with no missing codes and up to 24-bit ADC resolution. Effective resolution is 20 bits at a 10 Hz data rate and 16 bits at 1000 Hz. Differential inputs support direct connection to low-level voltage sources, while the programmable gain amplifier allows the front end to scale small sensor outputs before conversion. Low power consumption of 1.4 mW is useful in portable and distributed measurement equipment.

The delta-sigma architecture prioritizes resolution and noise behavior rather than the very high throughput associated with flash or successive-approximation ADCs. A 6.25 kSPS maximum conversion rate is appropriate for slow-changing process, temperature, pressure, and load signals. SPI-compatible SSI communication simplifies connection to microcontrollers and digital signal processors, while programmable operating characteristics support different bandwidth and noise tradeoffs.

Typical uses include industrial process-control loops, factory monitoring, portable instrumentation, pressure and temperature sensing, bridge-based measurements, and low-level battery-powered acquisition systems. For transducer measurements, the ADS1212 can combine differential input capability with programmable gain and digital filtering. For communications or test equipment, its serial interface reduces pin count and supports deterministic digital data transfer.

Designers should treat analog input filtering, reference quality, grounding, and digital-interface isolation as central to achieving the converter's rated performance. Select the data rate, gain, and digital-filter settings together because increasing conversion speed reduces the effective noise-free resolution. Confirm the complete pin description and recommended external component values in the manufacturer datasheet before laying out the board.

This page organizes the key ADS1212UG4 specifications, package considerations, drop-in alternatives, application guidance, and practical design notes. It also distinguishes exact datasheet characteristics from engineering choices such as filtering, gain, grounding, and data-rate configuration, helping engineers evaluate the converter before PCB implementation.

Drop-in-Alternativen für ADS1212UG4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit ADS1212UG4 (gleiche Bauform und Footprint) – abweichend in Package, Digital Interface, Internal ADC Resolution, Mounting Type, Number of Input Channels.

Texas Instruments
Package: 18-PDIP (0.300 inch, 7.62 mm)
Mounting Type: Through-Hole
Number of Input Channels: 1 differential
Vergleichen mit ADS1212UG4 →
Texas Instruments
Package: 8-SOIC
Digital Interface: SPI-compatible synchronous serial interface and two-wire control mode
Internal ADC Resolution: 24 bit
Vergleichen mit ADS1212UG4 →

ADS1212U

✅ Drop-In
Texas Instruments
📦 18-pin SOP
Delta-sigma analog-to-digital converter · 22 bit · 24 bit · 22 bit · 6.25 kSPS · 1 · Differential · 5 V

Preis auf Anfrage

Datenblatt ansehen →

ADS1212U/1K

✅ Drop-In
📦 18-pin SOP
Same 22-bit, 6.25 kSPS converter, terminals, and 18-pin SOP package; principal performance difference is 0%

📋 Referenzalternative (nicht im Katalog)

ADS1212PG4

✅ Drop-In
Texas Instruments
📦 18-pin SOP
22 bits (no missing codes) · Delta-Sigma (4th-order modulator) · 1 differential · 6.25 kSPS (max) · 20 bits · 16 bits

Preis auf Anfrage

Datenblatt ansehen →

ADS1212IPWR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 18-pin SOP
Same-family ADS1212 converter with matching 18-pin SOP architecture; principal ADC ratings differ by 0%

📋 Referenzalternative (nicht im Katalog)

ADS1212IPG4

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 18-pin SOP
Same-family ADS1212 converter with matching 18-pin SOP architecture; principal ADC ratings differ by 0%

📋 Referenzalternative (nicht im Katalog)

ADS1213IPWR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 18-pin SOP
Related 24-bit-family delta-sigma converter with approximately 9% higher nominal resolution and the same 18-pin SOP footprint

📋 Referenzalternative (nicht im Katalog)

ADS1213IPG4

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 18-pin SOP
Related 24-bit-family delta-sigma converter with approximately 9% higher nominal resolution and the same 18-pin SOP footprint

📋 Referenzalternative (nicht im Katalog)

ADS1212UG4 Grenzwerte & elektrische Eigenschaften

ADC Resolution 22 bits
ADC Architecture Delta-sigma
Maximum Conversion Rate 6.25 kSPS
Number of Input Channels 1 channel
Input Type Differential
Nominal Supply Voltage +5 V
Power Consumption 1.4 mW
Effective Resolution at 10 Hz 20 bits
Effective Resolution at 1000 Hz 16 bits
Missing Code Performance 22-bit no-missing-code performance
Internal ADC Resolution 24 bits
Programmable Gain Amplifier Programmable gain
Digital Interface SPI-compatible SSI
Gehäuse 18-pin SOP

ADS1212UG4 18-pin sop Pinbelegungsleitfaden

Pinbelegung für ADS1212UG4 (18-pin sop-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für ADS1212UG4 im 18-pin sop-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ADS1212UG4.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ADS1212UG4 ist geeignet für 6 Anwendungs: Industrial Process Control, Pressure and Load Cell Measurement, Battery-Powered Sensor Nodes, Precision Temperature Instrumentation, Data Acquisition and Test Equipment, Strain and Structural Monitoring.

🏭

Industrial Process Control

The ADS1212UG4 fits slow-changing industrial process variables such as pressure, temperature, level, and flow. Its differential input architecture helps reject common-mode voltage present on long sensor wiring, while the programmable gain amplifier accommodates low-level bridge outputs without moving the signal immediately into the ADC's full-scale range. The 6.25 kSPS maximum conversion rate is sufficient for many closed-loop measurement loops but is not intended for high-bandwidth process transients. Configuring the data rate below 1000 Hz can preserve higher effective resolution, including the manufacturer's 20-bit effective-resolution figure at 10 Hz, for more precise control decisions.

⚡

Pressure and Load Cell Measurement

The ADS1212UG4 is appropriate for bridge-based pressure and load-cell front ends where the useful signal is small and differential. The ADC's differential inputs pair with the bridge output, allowing common-mode excitation voltage to appear on both inputs while the amplified differential voltage is converted. The programmable gain stage increases the use of the converter's dynamic range for resistive sensor signals that would otherwise occupy only a small portion of the input range. Use a low-noise reference and suitable input filtering, and select a data rate that satisfies the mechanical settling time of the sensor and mechanical structure.

🧩

Battery-Powered Sensor Nodes

The ADS1212UG4's 1.4 mW low-power figure supports battery-powered measurement nodes that monitor temperature, strain, or environmental sensors. Its SPI-compatible SSI interface allows a low-power microcontroller to configure the converter and retrieve results without requiring a parallel data bus. The device can operate from a single +5 V rail, simplifying power architecture when the rest of the node uses regulated industrial or instrumentation power. For duty-cycled operation, evaluate the converter's operating and shutdown current, reference-network consumption, and wake-up timing to determine the real energy cost of each measurement cycle.

🌡️

Precision Temperature Instrumentation

The ADS1212UG4 can digitize low-level outputs from RTDs, thermocouple conditioning circuits, resistance bridges, and temperature sensors when the required bandwidth is low. Differential inputs are useful when the sensor circuit produces a small differential signal referenced to a larger common-mode level. The converter's 22-bit nominal resolution and 20-bit effective resolution at 10 Hz support fine-grained temperature measurement in laboratory and process instruments. Because thermocouple and RTD systems also depend on reference accuracy, lead resistance compensation, and EMI filtering, the ADC should be paired with carefully designed front-end and protection circuitry.

🖥️

Data Acquisition and Test Equipment

The ADS1212UG4 is useful in laboratory, portable test, and factory data-acquisition equipment that measures low-level analog voltages with a serial digital interface. The 6.25 kSPS maximum rate provides enough throughput for many sensor, calibration, and diagnostic measurements, while the serial interface minimizes PCB routing compared with a parallel ADC. The digital filter can reduce out-of-band noise, but its group delay must be included in the acquisition timing. For applications requiring simultaneous sampling or substantially faster waveform capture, a different ADC architecture will be more appropriate.

🏗️

Strain and Structural Monitoring

The ADS1212UG4 can acquire strain-gauge bridge signals in long-term structural, vibration-envelope, and equipment-condition monitoring systems. Differential input handling reduces common-mode pickup, which is important when the bridge is connected through wiring subject to industrial interference. The programmable gain amplifier and selectable data rates allow the measurement to be tuned for static loads or slow structural changes. High-gain operation increases sensitivity to small strain but also raises sensitivity to noise, so the analog input filter, reference network, grounding, and digital-filter bandwidth should be evaluated together before deployment.

Zusammenfassung der empfohlenen Produkte

ADS1212U/1K Same-family ADC for tube-format procurement Verwendet in: Industrial Process Control, Precision Temperature Instrumentation ADS1131IDR Texas Instruments Verwendet in: Industrial Process Control, Precision Temperature Instrumentation ADS1212U Texas Instruments Verwendet in: Pressure and Load Cell Measurement, Data Acquisition and Test Equipment ADS1212PG4 Texas Instruments Verwendet in: Pressure and Load Cell Measurement, Strain and Structural Monitoring ADS1212IPWR Same-family low-power ADC ordering option Verwendet in: Battery-Powered Sensor Nodes ADS1213IPG4 Related higher-resolution converter for alternative sensor designs Verwendet in: Battery-Powered Sensor Nodes ADS1213IPWR Related higher-resolution serial ADC option Verwendet in: Data Acquisition and Test Equipment ADS1212IPG4 Same-family conversion option Verwendet in: Strain and Structural Monitoring
What are the key specifications of ADS1212UG4 that engineers should know?
The ADS1212UG4 is a 22-bit, single-channel delta-sigma ADC with differential inputs, a maximum conversion rate of 6.25 kSPS, and a 1.4 mW power rating. It operates from a single +5 V supply, includes a programmable gain amplifier, and uses an SPI-compatible SSI interface. According to the manufacturer datasheet, effective resolution is 20 bits at 10 Hz and 16 bits at 1000 Hz, making the converter especially useful for low-level sensor and industrial measurement signals.
Where can I download the ADS1212UG4 datasheet PDF?
The manufacturer datasheet is available through the Texas Instruments ADS1212 and ADS1213 product-datasheet link on this page. It is the primary reference for the complete 18-pin SOP pin description, electrical characteristics, digital-filter settings, timing diagrams, and recommended application circuits. Use the manufacturer document rather than a distributor summary when assigning pins, selecting external components, or confirming absolute maximum ratings for the ADS1212UG4.
Where can I find the ADS1212UG4 pinout?
The complete ADS1212UG4 pin assignment is found in the pin-description table in the manufacturer datasheet. The device is an 18-pin SOP package with one differential analog input, supply connections, a serial interface, and control pins. Use that table when assigning PCB nets and tracing the SPI-compatible SSI signals. The page does not reproduce an unverified pin list, so the manufacturer diagram should be treated as the authoritative layout reference.
What can replace the ADS1212UG4?
The closest documented replacements are the ADS1212U, ADS1212U/1K, and ADS1212PG4, which retain the same core converter architecture and 18-pin SOP footprint. The ADS1212U/1K comparison states that the terminals, package, and principal performance characteristics are consistent, so replacement does not require circuit modification. Because ordering suffixes can identify tube, tape-and-reel, or lead-free finishes, verify the required package, temperature range, and device markings before production use.
Is ADS1212U/1K a drop-in replacement for ADS1212UG4?
Yes, the published ADS1212U/1K comparison identifies it as a direct replacement with consistent terminals, package, and main performance characteristics. Both devices are single-channel, 22-bit, 6.25 kSPS delta-sigma converters in an 18-pin SOP package. The primary difference is ordering or packaging notation rather than converter functionality. Confirm the exact tube, reel, and lead-free finish required by your assembly process before approving the substitution.
ADS1212UG4 vs ADS1213IPWR - which is better for precision measurement?
ADS1212UG4 is the appropriate choice when the design specifically requires the established ADS1212 22-bit conversion profile and its 18-pin SOP interface. ADS1213IPWR belongs to the related ADS1213 family and can offer a different resolution profile for newer designs. Both are delta-sigma converters intended for low-level differential measurements, but the final choice depends on the required conversion rate, resolution, pin mapping, and operating conditions rather than the device family name alone.
When should I choose ADS1212UG4 instead of ADS1212U/1K?
Choose ADS1212UG4 when its specific ordering and lead-free package designation matches the BOM, incoming inspection process, and production documentation. Choose ADS1212U/1K when its ordering code better matches the required 18-pin SOP tube format and the assembly plan. The published comparison indicates consistent terminals and principal performance characteristics, so this is primarily a procurement and package-identification decision. Confirm the manufacturer markings and suffix interpretation for the production lot.
Is ADS1212UG4 suitable for industrial sensor measurement?
Yes, the ADS1212UG4 is suitable for industrial sensor measurement when the signal bandwidth is low enough for its maximum 6.25 kSPS conversion rate. Its differential input supports bridge and transducer measurements, the programmable gain amplifier can accommodate small signal levels, and the digital filter can suppress out-of-band noise. For fast-changing signals, choose a higher-throughput ADC or verify the required settling time and filter latency before committing to this converter.
What is the power consumption of ADS1212UG4?
The manufacturer lists the ADS1212UG4 low-power figure as 1.4 mW. This operating point is valuable for portable instruments, battery-powered sensor nodes, and distributed industrial monitoring where converter power can dominate standby budgets. Actual system consumption also depends on the +5 V supply, interface activity, and external circuitry. Use the datasheet operating-current and shutdown details to confirm the exact mode and configuration used in the final design.
How does conversion speed affect ADS1212UG4 resolution?
The ADS1212UG4 trades output speed against usable resolution. The manufacturer lists 20-bit effective resolution at 10 Hz and 16-bit effective resolution at 1000 Hz. Faster conversion provides more samples per second but reduces the time available for the delta-sigma modulator and digital filter to reject noise. Select the highest data rate that still meets the settling-time requirement, then configure the gain and filter to preserve the required noise performance.
What is the best Analog Devices equivalent for ADS1212UG4?
No Analog Devices equivalent is established as a verified drop-in replacement in the available cross-reference information. An equivalent selection must match the 18-pin SOP footprint, differential input arrangement, SPI-compatible interface timing, supply voltage, gain architecture, and data-rate behavior. Similar resolution alone is insufficient because ADC front-end and digital-interface differences can require board changes. Treat an Analog Devices candidate as a new design requiring complete electrical and timing validation.
Where can I buy ADS1212UG4 online?
Use the Request a Quote form on this page to request ADS1212UG4 availability, quantity, lead time, and current commercial terms. The form routes the request through XAIPART without requiring a static price that may quickly become outdated. For production planning, also provide the required package format, quantity, target date, and assembly requirements so the appropriate 18-pin SOP ordering configuration can be confirmed.
What is the price of ADS1212UG4?
Current ADS1212UG4 pricing is obtained through the Request a Quote form on this page rather than from a static page value. Submit the required quantity and package preference for a quote tied to the current component supply position. The form is the appropriate route for commercial review because pricing, lot availability, and lead time can change independently of the device's electrical characteristics.
What is the lead time for ADS1212UG4?
The current lead time for ADS1212UG4 should be requested through the Request a Quote form on this page. Include the required quantity, approved supplier list, tube or reel preference, and date by which material must arrive. A complete request allows XAIPART to confirm the available package configuration and provide a lead-time commitment tied to the stated schedule rather than an estimate based on a different ordering suffix.
Is ADS1212UG4 in stock?
Current ADS1212UG4 stock should be confirmed through the Request a Quote form on this page. Submit the quantity and required package format so the response reflects the requested material instead of a generic listing status. For production planning, provide your forecast and required delivery date; allocation and lead time can vary with order quantity, package choice, and current replenishment conditions.
How should I design the analog input and grounding for ADS1212UG4?
Use the manufacturer application circuit as the starting point for differential input routing, filtering, supply bypassing, and grounding. Keep the analog input traces short, avoid routing them beneath digital interface signals, and use a quiet ground return for the converter and its reference network. The ADS1212UG4's 22-bit resolution makes layout-induced errors more relevant than in a low-resolution measurement, so validate the complete signal chain with the intended sensor source and noise environment.

Technische Referenzdaten für ADS1212UG4 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose ADS1212UG4 for new or existing 18-pin SOP designs requiring a 22-bit, single-channel delta-sigma ADC with differential inputs, programmable gain, an SPI-compatible SSI interface, and low power consumption. Its documented 6.25 kSPS maximum rate is most suitable for slow sensor and process signals rather than high-bandwidth waveform acquisition. Select ADS1212U/1K when its ordering format better matches the production tube requirement, or ADS1212PG4 when the approved BOM uses that designation; their principal ratings and terminals remain consistent. ADS1213IPWR and ADS1213IPG4 are worth reviewing when the related family's higher nominal resolution is useful, but timing, filter behavior, and pin-level compatibility must be checked against the complete system design. No cross-brand drop-in alternative is established, so an Analog Devices or other competitor candidate should be treated as a new-layout design rather than a direct substitution.

Vergleich mit Alternativen

Parameter Dieses Produkt ADS1212U ADS1212U/1K ADS1212PG4 ADS1212IPWR ADS1213IPWR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 18-pin SOP 18-pin SOP 18-pin SOP 18-pin SOP 18-pin SOP 18-pin SOP
ADC Resolution 22 bits 22 bits 22 bits 22 bits 22 bits 24-bit family
Supply Voltage Single +5 V Single +5 V Single +5 V Single +5 V Single +5 V Single +5 V

Wichtigste Unterscheidungsmerkmale

  • Direct 18-pin SOP family replacement path (vs. ADS1212U/1K)
  • Low 1.4 mW operating-power figure (vs. ADS1212U)
  • Higher-resolution related-family option (vs. ADS1213IPWR)
  • Useful resolution is selectable through data rate (vs. ADS1212PG4)

Designhinweise

Route the differential analog input as a compact, symmetrical pair and keep it away from the SPI-compatible SSI clock and data traces. Place input filtering and protection components close to the ADC pins, with their return paths connected to the quiet analog ground structure. Because the converter provides up to 22-bit nominal resolution, connector leakage, contaminated PCB surfaces, and ground coupling can become visible in the measurement. Follow the manufacturer layout and grounding recommendations rather than treating the analog section as a generic 5 V digital circuit.

Choose the gain, data rate, and digital-filter setting together. The manufacturer's effective-resolution figures show the tradeoff directly: 20 bits at 10 Hz compared with 16 bits at 1000 Hz. A faster rate reduces conversion time but also reduces noise rejection. If the source changes rapidly, include digital-filter latency in the control-loop timing. If the source changes slowly, reducing the data rate can improve usable resolution while making the measurement more responsive to drift and noise outside the selected filter bandwidth.

Use the manufacturer reference-network and bypass-capacitor recommendations directly at the ADC pins. Place the closest decoupling capacitor on the supply side of the package and provide a low-impedance return to the device ground. Reference noise and supply disturbance can appear directly as conversion error, particularly when the programmable gain is set high. Check the reference voltage, input common-mode range, and absolute maximum ratings for the selected gain before applying the full sensor range.

Do not treat the 22-bit nominal resolution as 22 useful bits at every data rate. At 1000 Hz, the listed effective resolution is 16 bits, so system-error budgeting should use the resolution applicable to the operating mode. Also avoid assuming that the differential input can accept signals outside its common-mode range at every gain setting. Validate the complete sensor, excitation, reference, filter, and ADC combination under the worst-case temperature and supply conditions.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The ADS1212UG4 G4 ordering designation refers to a lead-free package finish, but separate RoHS, REACH, halogen-free, and conflict-minerals declarations were not found. AEC-Q100 qualification is not indicated for this device.

Daten verifiziert am: 2026-11-18 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

ADS1212UG4 datasheet ADS1212UG4 pinout ADS1212UG4 datasheet pdf ADS1212UG4 equivalent ADS1212UG4 replacement ADS1212UG4 cross reference ADS1212UG4 vs ADS1213IPWR ADS1212UG4 footprint ADS1212UG4 application circuit Texas Instruments ADS1212UG4 ADS1212UG4 price ADS1212UG4 stock

Verwandte Bauteile & Begriffe

Texas Instruments ADS1212UG4 ADS1212U ADS1212U/1K ADS1212PG4 ADS1212IPWR ADS1212IPG4 ADS1213IPWR ADS1213IPG4 ADS1212 ADS1213 analog-to-digital converter ADC delta-sigma ADC precision ADC data converter semiconductor differential input programmable gain amplifier SPI-compatible SSI no-missing-code performance effective resolution 18-pin SOP industrial process control pressure transducer load cell bridge measurement data acquisition battery-powered sensor node
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen