ADS1212UG4 - 22-Bit Delta-Sigma ADC | Texas Instruments
MPN: ADS1212UG4 ✓ 啟用中ADS1212UG4 概覽
A delta-sigma analog-to-digital converter is an ADC category that uses oversampling, noise shaping, and digital filtering to provide high resolution and excellent noise performance. The ADS1212 belongs to the broader ADC and data-converter hierarchy, where its differential input architecture helps reject common-mode noise when measuring low-level signals from sensors, bridges, strain gauges, and transducers. Its internal digital filter provides a conventional conversion result while the serial interface transfers data to a controller.
The manufacturer describes 22-bit resolution with no missing codes and up to 24-bit ADC resolution. Effective resolution is 20 bits at a 10 Hz data rate and 16 bits at 1000 Hz. Differential inputs support direct connection to low-level voltage sources, while the programmable gain amplifier allows the front end to scale small sensor outputs before conversion. Low power consumption of 1.4 mW is useful in portable and distributed measurement equipment.
The delta-sigma architecture prioritizes resolution and noise behavior rather than the very high throughput associated with flash or successive-approximation ADCs. A 6.25 kSPS maximum conversion rate is appropriate for slow-changing process, temperature, pressure, and load signals. SPI-compatible SSI communication simplifies connection to microcontrollers and digital signal processors, while programmable operating characteristics support different bandwidth and noise tradeoffs.
Typical uses include industrial process-control loops, factory monitoring, portable instrumentation, pressure and temperature sensing, bridge-based measurements, and low-level battery-powered acquisition systems. For transducer measurements, the ADS1212 can combine differential input capability with programmable gain and digital filtering. For communications or test equipment, its serial interface reduces pin count and supports deterministic digital data transfer.
Designers should treat analog input filtering, reference quality, grounding, and digital-interface isolation as central to achieving the converter's rated performance. Select the data rate, gain, and digital-filter settings together because increasing conversion speed reduces the effective noise-free resolution. Confirm the complete pin description and recommended external component values in the manufacturer datasheet before laying out the board.
This page organizes the key ADS1212UG4 specifications, package considerations, drop-in alternatives, application guidance, and practical design notes. It also distinguishes exact datasheet characteristics from engineering choices such as filtering, gain, grounding, and data-rate configuration, helping engineers evaluate the converter before PCB implementation.
直接替換替代品,適用於 ADS1212UG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADS1212UG4 (相同外形與佔位) — 差異在於 Package, Digital Interface, Internal ADC Resolution, Mounting Type, Number of Input Channels.
ADS1212U
✅ 直接替換聯絡詢價
查看資料表 →ADS1212U/1K
✅ 直接替換📋 參考替代品(不在目錄中)
ADS1212PG4
✅ 直接替換聯絡詢價
查看資料表 →ADS1212IPWR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ADS1212IPG4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ADS1213IPWR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ADS1213IPG4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ADS1212UG4 最大額定值與電氣特性
| ADC Resolution | 22 bits |
| ADC Architecture | Delta-sigma |
| Maximum Conversion Rate | 6.25 kSPS |
| Number of Input Channels | 1 channel |
| Input Type | Differential |
| Nominal Supply Voltage | +5 V |
| Power Consumption | 1.4 mW |
| Effective Resolution at 10 Hz | 20 bits |
| Effective Resolution at 1000 Hz | 16 bits |
| Missing Code Performance | 22-bit no-missing-code performance |
| Internal ADC Resolution | 24 bits |
| Programmable Gain Amplifier | Programmable gain |
| Digital Interface | SPI-compatible SSI |
| 封裝 | 18-pin SOP |
ADS1212UG4 18-pin sop 腳位配置指南
ADS1212UG4(18-pin sop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: ADS1212UG4.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADS1212UG4 適用於 6 應用s: Industrial Process Control, Pressure and Load Cell Measurement, Battery-Powered Sensor Nodes, Precision Temperature Instrumentation, Data Acquisition and Test Equipment, Strain and Structural Monitoring.
Industrial Process Control
The ADS1212UG4 fits slow-changing industrial process variables such as pressure, temperature, level, and flow. Its differential input architecture helps reject common-mode voltage present on long sensor wiring, while the programmable gain amplifier accommodates low-level bridge outputs without moving the signal immediately into the ADC's full-scale range. The 6.25 kSPS maximum conversion rate is sufficient for many closed-loop measurement loops but is not intended for high-bandwidth process transients. Configuring the data rate below 1000 Hz can preserve higher effective resolution, including the manufacturer's 20-bit effective-resolution figure at 10 Hz, for more precise control decisions.
推薦
Pressure and Load Cell Measurement
The ADS1212UG4 is appropriate for bridge-based pressure and load-cell front ends where the useful signal is small and differential. The ADC's differential inputs pair with the bridge output, allowing common-mode excitation voltage to appear on both inputs while the amplified differential voltage is converted. The programmable gain stage increases the use of the converter's dynamic range for resistive sensor signals that would otherwise occupy only a small portion of the input range. Use a low-noise reference and suitable input filtering, and select a data rate that satisfies the mechanical settling time of the sensor and mechanical structure.
推薦
Battery-Powered Sensor Nodes
The ADS1212UG4's 1.4 mW low-power figure supports battery-powered measurement nodes that monitor temperature, strain, or environmental sensors. Its SPI-compatible SSI interface allows a low-power microcontroller to configure the converter and retrieve results without requiring a parallel data bus. The device can operate from a single +5 V rail, simplifying power architecture when the rest of the node uses regulated industrial or instrumentation power. For duty-cycled operation, evaluate the converter's operating and shutdown current, reference-network consumption, and wake-up timing to determine the real energy cost of each measurement cycle.
推薦
Precision Temperature Instrumentation
The ADS1212UG4 can digitize low-level outputs from RTDs, thermocouple conditioning circuits, resistance bridges, and temperature sensors when the required bandwidth is low. Differential inputs are useful when the sensor circuit produces a small differential signal referenced to a larger common-mode level. The converter's 22-bit nominal resolution and 20-bit effective resolution at 10 Hz support fine-grained temperature measurement in laboratory and process instruments. Because thermocouple and RTD systems also depend on reference accuracy, lead resistance compensation, and EMI filtering, the ADC should be paired with carefully designed front-end and protection circuitry.
推薦
Data Acquisition and Test Equipment
The ADS1212UG4 is useful in laboratory, portable test, and factory data-acquisition equipment that measures low-level analog voltages with a serial digital interface. The 6.25 kSPS maximum rate provides enough throughput for many sensor, calibration, and diagnostic measurements, while the serial interface minimizes PCB routing compared with a parallel ADC. The digital filter can reduce out-of-band noise, but its group delay must be included in the acquisition timing. For applications requiring simultaneous sampling or substantially faster waveform capture, a different ADC architecture will be more appropriate.
推薦
Strain and Structural Monitoring
The ADS1212UG4 can acquire strain-gauge bridge signals in long-term structural, vibration-envelope, and equipment-condition monitoring systems. Differential input handling reduces common-mode pickup, which is important when the bridge is connected through wiring subject to industrial interference. The programmable gain amplifier and selectable data rates allow the measurement to be tuned for static loads or slow structural changes. High-gain operation increases sensitivity to small strain but also raises sensitivity to noise, so the analog input filter, reference network, grounding, and digital-filter bandwidth should be evaluated together before deployment.
推薦
推薦產品摘要
工程參考資料,適用於 ADS1212UG4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADS1212U | ADS1212U/1K | ADS1212PG4 | ADS1212IPWR | ADS1213IPWR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 18-pin SOP | 18-pin SOP | 18-pin SOP | 18-pin SOP | 18-pin SOP | 18-pin SOP |
| ADC Resolution | 22 bits | 22 bits | 22 bits | 22 bits | 22 bits | 24-bit family |
| Supply Voltage | Single +5 V | Single +5 V | Single +5 V | Single +5 V | Single +5 V | Single +5 V |
主要差異化特點
- Direct 18-pin SOP family replacement path (對比ADS1212U/1K)
- Low 1.4 mW operating-power figure (對比ADS1212U)
- Higher-resolution related-family option (對比ADS1213IPWR)
- Useful resolution is selectable through data rate (對比ADS1212PG4)
設計說明
Route the differential analog input as a compact, symmetrical pair and keep it away from the SPI-compatible SSI clock and data traces. Place input filtering and protection components close to the ADC pins, with their return paths connected to the quiet analog ground structure. Because the converter provides up to 22-bit nominal resolution, connector leakage, contaminated PCB surfaces, and ground coupling can become visible in the measurement. Follow the manufacturer layout and grounding recommendations rather than treating the analog section as a generic 5 V digital circuit.
Choose the gain, data rate, and digital-filter setting together. The manufacturer's effective-resolution figures show the tradeoff directly: 20 bits at 10 Hz compared with 16 bits at 1000 Hz. A faster rate reduces conversion time but also reduces noise rejection. If the source changes rapidly, include digital-filter latency in the control-loop timing. If the source changes slowly, reducing the data rate can improve usable resolution while making the measurement more responsive to drift and noise outside the selected filter bandwidth.
Use the manufacturer reference-network and bypass-capacitor recommendations directly at the ADC pins. Place the closest decoupling capacitor on the supply side of the package and provide a low-impedance return to the device ground. Reference noise and supply disturbance can appear directly as conversion error, particularly when the programmable gain is set high. Check the reference voltage, input common-mode range, and absolute maximum ratings for the selected gain before applying the full sensor range.
Do not treat the 22-bit nominal resolution as 22 useful bits at every data rate. At 1000 Hz, the listed effective resolution is 16 bits, so system-error budgeting should use the resolution applicable to the operating mode. Also avoid assuming that the differential input can accept signals outside its common-mode range at every gain setting. Validate the complete sensor, excitation, reference, filter, and ADC combination under the worst-case temperature and supply conditions.
合規資訊
The ADS1212UG4 G4 ordering designation refers to a lead-free package finish, but separate RoHS, REACH, halogen-free, and conflict-minerals declarations were not found. AEC-Q100 qualification is not indicated for this device.