Texas Instruments

ADS1254EG4 - 24-Bit 20-kSPS 4-Channel ADC | Texas Instruments

Teilenummer: ADS1254EG4 ✓ Aktiv
Separate AVDD pin Vdss 20-pin SSOP Package
MOQ: 1 |

ADS1254EG4 Übersicht

The Texas Instruments ADS1254EG4 is a 24-bit, four-channel, delta-sigma analog-to-digital converter rated for 20 kSPS conversion throughput and housed in a 20-pin SSOP package. It provides separate AVDD and DVDD supply connections, a flexible two-wire synchronous serial interface, and 19-bit effective resolution characterized by 1.8 ppm RMS noise. These characteristics position the ADS1254EG4 as a precision converter for industrial measurement, instrumentation, and low-frequency sensor acquisition systems.

A delta-sigma ADC is a semiconductor data-conversion device that uses oversampling, digital filtering, and noise shaping to obtain high resolution from a relatively low-bandwidth signal chain. Within the converter hierarchy, the ADS1254EG4 belongs to the precision ADC category and uses a fourth-order sigma-delta modulator architecture. This method is particularly useful when measurement bandwidth is limited but input resolution and rejection of low-frequency noise are more important than very high sampling rates.

The principal features include 24-bit nominal resolution, four single-ended input channels, a maximum conversion rate of 20 kSPS, and differential or single-ended analog input capability. Separate AVDD and DVDD pins allow the analog and digital portions of the circuit to use independently selected supply rails, helping reduce ground coupling between sensitive measurements and digital control signals. A programmable data rate, internal oscillator, and selectable input and reference voltages support adaptable measurement systems.

The delta-sigma conversion architecture prioritizes narrow-band accuracy rather than waveform capture. Its digital decimation filter suppresses out-of-band noise, while the 19-bit effective resolution and 1.8 ppm RMS noise characterize the usable precision of the conversion chain. Because the input bandwidth is intentionally limited, applications must obey the datasheet's filter and settling requirements rather than treating the nominal 24-bit resolution as instantaneous across every possible input frequency.

Typical uses include weighing systems, pressure and temperature measurement, laboratory instrumentation, process monitoring, and portable sensor interfaces. In each case, the device can acquire several low-frequency sensor channels through its serial interface while the host processor performs calibration, filtering, or unit conversion. The four-channel architecture also reduces the number of separate converters required when multiple slow-moving or multiplexed analog signals must be measured.

PCB implementation should preserve the separation between analog inputs, the analog supply return, the digital interface, and the digital return path. Place the required input and decoupling capacitors close to their associated pins, use a quiet analog ground strategy, and route the serial clock and data lines away from sensitive analog nodes. Verify the selected data rate and digital filter settling time before using successive measurements in a control loop.

This page combines manufacturer specifications, package and sourcing details, drop-in replacement analysis, application guidance, and design notes to support both component selection and board-level implementation. It is intended to help engineers evaluate the ADS1254EG4 against pin-compatible alternatives without overlooking the distinctions between resolution, conversion speed, filtering, interface behavior, and supply requirements.

Drop-in-Alternativen für ADS1254EG4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit ADS1254EG4 (gleiche Bauform und Footprint) – abweichend in Input Configuration, Package.

Texas Instruments
Input Configuration: 4 differential inputs
Package: SSOP-20 (DBQ)
Vergleichen mit ADS1254EG4 →

ADS1254E

✅ Drop-In
Texas Instruments
📦 20-pin SSOP
Delta-sigma ADC · 24 bit · 20 kSPS · 19 bit · 4 channels · 4 differential inputs · 1.8 ppm · 15 ppm maximum

✓ Auf Lager

$11.4844 / Stück

Datenblatt ansehen →

ADS1254EG4 Grenzwerte & elektrische Eigenschaften

Auflösung 24 bit
Effective Resolution 19 bit
Conversion Rate 20 kSPS
Number of Input Channels 4 channels
Architecture 1 delta-sigma converter
Input Configuration Single-ended or differential inputs
Noise 1.8 ppm RMS
Schnittstelle Two-wire synchronous serial interface
Analog Supply Separate AVDD pin
Digital Supply Separate DVDD pin
Gehäuse 20-pin SSOP
Montageart Surface mount

ADS1254EG4 20-pin ssop Pinbelegungsleitfaden

Pinbelegung für ADS1254EG4 (20-pin ssop-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für ADS1254EG4 im 20-pin ssop-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ADS1254EG4.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ADS1254EG4 ist geeignet für 6 Anwendungs: Industrial Pressure and Load Measurement, Precision Temperature Sensing, Laboratory Instrumentation, Environmental Monitoring, Battery-Powered Portable Instruments, Process Control and Monitoring.

🏭

Industrial Pressure and Load Measurement

The ADS1254EG4 fits industrial pressure, force, and load-cell acquisition systems that require more resolution than ordinary 12-bit or 16-bit SAR converters provide. Its four inputs can support several slow-changing bridge or conditioned sensor signals, while the 24-bit nominal resolution and 19-bit effective resolution preserve fine measurement increments. A 20 kSPS maximum conversion rate is more than adequate for many force and pressure systems. The principal design consideration is filter settling: each channel must receive enough time to settle after selection or input switching, and the analog conditioning should minimize noise before conversion.

🌡️

Precision Temperature Sensing

The ADS1254EG4 is appropriate for high-accuracy RTD, thermocouple, or linearized temperature measurement when the system values fine resolution over a narrow measurement bandwidth. Four analog inputs reduce converter count in multi-zone temperature systems, while the delta-sigma architecture provides digital filtering and noise shaping. Its 20 kSPS throughput supports relatively quick sampling, but the usable response remains governed by the programmed digital filter and settling period. Use a low-noise reference, a clean analog layout, and an input network that protects the converter from overvoltage and ESD events.

🧪

Laboratory Instrumentation

The ADS1254EG4 can form the measurement front end of laboratory instruments that digitize slow sensor outputs, reference voltages, or multichannel test signals. Its 24-bit resolution and four-input architecture suit precision measurements, and the two-wire synchronous serial interface simplifies connection to an embedded controller. Because the serial clock and data lines are digital signals, isolate them from analog inputs and return the interface current cleanly to the digital ground region. Confirm digital-filter latency before using output samples as immediate feedback in calibration or control routines.

🧩

Environmental Monitoring

The ADS1254EG4 is suitable for environmental monitoring systems that combine several low-frequency analog channels, such as soil, gas, humidity, or water-level sensor outputs. Its four inputs help consolidate multiple measurements, while high nominal resolution is beneficial when the useful change in a sensor signal is small relative to its full-scale range. The device's delta-sigma conversion is well matched to slowly varying environmental quantities and rejects out-of-band noise through digital filtering. Design the external input conditioning for sensor-specific ranges, maintain stable references, and include calibration records because drift at the reference and amplifier stages can dominate system accuracy.

📱

Battery-Powered Portable Instruments

The ADS1254EG4 can support portable measurement equipment that periodically samples precision sensors rather than capturing high-bandwidth waveforms. Its multiplexed, low-rate conversion profile allows the system to spend more time in measurement activity and less time handling high-rate transient data. The exact power budget depends on the selected data rate, filter configuration, supply voltages, and operating duty cycle, all of which should be confirmed in the manufacturer electrical-characteristics tables. Use the enable or power-control strategy recommended by the datasheet and ensure every shutdown interval preserves the required state of the external system.

🌐

Process Control and Monitoring

The ADS1254EG4 fits process-monitoring equipment that must resolve small changes in pressure, flow, level, or other slowly varying process variables. Four channels allow a compact controller to monitor multiple conditioned signals without using four separate converters, and the high-resolution conversion chain improves visibility near set points. The 20 kSPS maximum rate is generally more than adequate for many slow process loops, but selected filter modes can introduce settling latency. Establish a fixed acquisition cycle, account for multiplexer or filter delay, and keep high-current switching nodes away from the analog input and reference paths.

What are the key specifications of ADS1254EG4 that engineers should know?
The ADS1254EG4 is a 24-bit, four-channel, single delta-sigma ADC that converts inputs at up to 20 kSPS in a 20-pin SSOP package. According to the Texas Instruments ADS1254 product information, it provides separate AVDD and DVDD supplies, a two-wire synchronous serial interface, and 19-bit effective resolution characterized by 1.8 ppm RMS noise. These specifications make it appropriate for precision, low-frequency measurement rather than high-bandwidth waveform acquisition.
What is the operating voltage of ADS1254EG4?
The operating-voltage limits for ADS1254EG4 are not stated in the cited product-page text, so consult the pin-description and electrical-characteristics tables in the manufacturer datasheet before applying supply rails. The device has dedicated AVDD and DVDD connections, allowing separate analog and digital supply selection, but those connections do not by themselves establish their allowable ranges. Verify both rails and their sequencing requirements against the full operating conditions.
How fast can ADS1254EG4 perform analog-to-digital conversions?
The ADS1254EG4 supports conversion rates up to 20 kSPS, as stated by Texas Instruments on the ADS1254 product page. Its delta-sigma architecture applies digital filtering and decimation, so the usable result bandwidth and settling behavior depend on the programmed data rate and filter configuration. For continuous measurements, calculate the time needed for the selected filter to settle before treating every output as a fresh conversion.
Where can I download the ADS1254EG4 datasheet PDF?
The official ADS1254 datasheet is reached through the Texas Instruments ADS1254 product page at https://www.ti.com/product/ADS1254. The manufacturer datasheet contains the authoritative electrical characteristics, pin descriptions, register map, digital-filter behavior, and application guidance. A third-party ADS1254EG4 PDF listing also appears at AllDatasheet, but the TI-hosted document should be used for engineering decisions and lifecycle revisions.
Where can I find the ADS1254EG4 pinout and package information?
The ADS1254EG4 uses a 20-pin SSOP package, and its complete pin descriptions and package drawing appear in the Texas Instruments ADS1254 datasheet. Start with the Pin Configuration and Specifications tables on the TI product page, then use the datasheet's connection diagram when assigning AVDD, DVDD, analog inputs, reference connections, ground pins, and serial-interface signals. Do not infer unused or alternate-function pins from the generic SSOP outline.
Is ADS1254EG4 suitable for precision sensor measurement?
Yes, the ADS1254EG4 is well matched to precision, low-frequency sensor measurement. Its 24-bit nominal resolution, 19-bit effective resolution, four analog inputs, and 1.8 ppm RMS noise support measurement systems that demand fine code resolution and low-noise acquisition. The trade-off is bandwidth: the delta-sigma filtering architecture favors slow or multiplexed signals rather than fast transient capture, so confirm the filter settling time before each conversion.
What can replace the ADS1254EG4 with a drop-in connection?
ADS1254E is the closest identified drop-in option because Texas Instruments lists it in the same 20-pin SSOP ADS1254 family and the cross-reference results explicitly compare it with ADS1254EG4. Before replacing the device, verify the ordering temperature grade, package suffix, electrical limits, and availability of the exact suffix. The search results do not identify five distinct pin-compatible replacements, so a broader substitution should not be treated as validated without a manufacturer cross-reference.
Is ADS1254E the same as ADS1254EG4?
ADS1254E and ADS1254EG4 belong to the same Texas Instruments ADS1254 device family and are listed in a direct comparison, but the complete suffix-specific ordering details must be checked before treating them as identical. ADS1254E is identified as a 20-pin SSOP option, while ADS1254EG4 is the exact ordered MPN being evaluated. Confirm temperature range, reel or tube configuration, grade markings, and lifecycle status in the manufacturer ordering information.
When should I choose ADS1254EG4 over ADS1254E?
Choose the exact ADS1254EG4 ordering code when its specified temperature grade, package configuration, and lifecycle terms satisfy the production requirement. Choose ADS1254E only after checking that its suffix-specific parameters and supply configuration match the intended board. Because both are members of the same ADS1254 family, the main decision is normally exact orderable qualification and availability rather than a change in the basic 24-bit, four-channel conversion architecture.
ADS1254EG4 vs ADS1254E: which is better for a new design?
ADS1254EG4 is preferable when it matches the required production grade and package configuration, because it is the exact MPN being specified. ADS1254E may be suitable when its manufacturer ordering attributes are confirmed equivalent for the application. Both share the core 24-bit, 20-kSPS, four-channel ADS1254 functionality, so the decisive checks are suffix-specific temperature grade, mechanical packaging, qualification, and current availability.
What is the best drop-in replacement for ADS1254EG4?
ADS1254E is the best directly identified drop-in candidate from the available manufacturer and comparison references. It uses the same 20-pin SSOP ADS1254 family, allowing a footprint-compatible substitution when its suffix-specific electrical and qualification requirements match. No additional distinct, pin-compatible replacements were established by the cross-reference results, and cross-brand parts should not be selected without a verified package and pinout comparison.
What is the best Cross Reference equivalent for ADS1254EG4?
ADS1254E is the best supported equivalent because it is a manufacturer-listed member of the ADS1254 family in a 20-pin SSOP package and is directly compared with ADS1254EG4 in the cross-reference results. A true cross-brand equivalent cannot be named confidently without a verified pinout and parametric comparison. Use the Texas Instruments cross-reference search for any new substitution and confirm channel count, resolution, interface, supply rails, timing, and package dimensions.
Where can I buy ADS1254EG4 online and what is its lead time?
Use the Request a Quote form on this page to request ADS1254EG4 pricing, current stock, minimum order quantity, and lead time. The component is listed for purchase by multiple authorized supply channels, but live inventory and delivery timing change and should not be inferred from a search result. Provide the exact ADS1254EG4 MPN, package code, and required quantity so the quote reflects the correct ordered device.
How much does ADS1254EG4 cost?
The current commercial terms for ADS1254EG4 are available through the Request a Quote form on this page. Pricing depends on quantity, package configuration, and market availability, so a static price figure can become stale quickly. Submit the exact MPN and planned order quantity to obtain a current quote and confirm the associated lead time.
Is ADS1254EG4 in stock?
Current ADS1254EG4 inventory should be confirmed through the Request a Quote form on this page. Although distributor listings indicate purchasable inventory, stock levels are dynamic and can change after the listing is indexed. State the required quantity and package configuration in the request to receive a current availability confirmation rather than relying on a stale listing status.

Technische Referenzdaten für ADS1254EG4 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose ADS1254EG4 when its exact suffix-specific grade, package configuration, and production status satisfy the design and no separate pin-compatible substitution has been formally validated. ADS1254E is the closest identified drop-in alternative because it belongs to the same Texas Instruments ADS1254 family, uses the 20-pin SSOP package, and matches the stated 24-bit, 20-kSPS, four-channel architecture. Before exchanging the parts, verify temperature range, ordering attributes, supply limits, interface timing, and qualification. The ADS1254EG4 is better suited than conventional lower-resolution converters when fine code resolution and narrow-band noise performance matter. It is not the natural choice for high-bandwidth waveform capture because the delta-sigma filtering and settling requirements restrict its effective measurement bandwidth.

Vergleich mit Alternativen

Parameter Dieses Produkt ADS1254E
Brand Texas Instruments Texas Instruments
Package 20-pin SSOP 20-pin SSOP
Resolution 24 bit 24 bit
Effective Resolution 19 bit 19 bit
Conversion Rate 20 kSPS 20 kSPS
Input Channels 4 channels 4 channels
Conversion Architecture Single delta-sigma converter Single delta-sigma converter
Noise 1.8 ppm RMS 1.8 ppm RMS
Serial Interface Two-wire synchronous serial interface Two-wire synchronous serial interface
Supply Architecture Separate AVDD and DVDD Separate AVDD and DVDD

Wichtigste Unterscheidungsmerkmale

  • High nominal resolution for narrow-band measurement (vs. ADS1254E)
  • Four-channel measurement consolidation (vs. ADS1254E)
  • Separate analog and digital supply architecture (vs. ADS1254E)

Designhinweise

Keep the analog inputs, reference connection, AVDD decoupling, and analog ground return compact and away from the serial clock and data routing. The ADS1254EG4 uses separate AVDD and DVDD connections, so preserve those supply domains on the PCB. Place input and bypass capacitors next to their associated pins, use a continuous ground reference, and avoid routing digital return current beneath the analog input network.

Account for digital-filter settling before using a conversion as a fresh measurement. The usable output delay depends on the selected data rate and decimation-filter configuration. In multiplexed systems, allow the analog input to settle after channel selection, and do not change the input or reference state until the configured acquisition sequence is complete. This prevents partially settled conversions from appearing as sensor drift.

Do not treat nominal 24-bit resolution as unlimited measurement accuracy. Reference-voltage noise, input amplifier offset and drift, resistor tolerances, reference decoupling, and PCB leakage can all reduce the effective result. Use stable precision components, calibrate offset and gain, verify the reference against a higher-accuracy source, and confirm the selected data rate and digital-filter bandwidth against the intended signal spectrum.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations appear in the cited product-page and distributor data.

Daten verifiziert am: 2026-11-18 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

ADS1254EG4 datasheet ADS1254EG4 datasheet pdf ADS1254EG4 pinout ADS1254EG4 schematic ADS1254EG4 equivalent ADS1254EG4 replacement ADS1254EG4 cross reference ADS1254EG4 vs ADS1254E ADS1254EG4 20-pin SSOP ADS1254EG4 price ADS1254EG4 stock Texas Instruments ADS1254EG4

Verwandte Bauteile & Begriffe

Texas Instruments ADS1254EG4 ADS1254E delta-sigma analog-to-digital converter precision ADC ADC data converter semiconductor 24-bit resolution 19-bit effective resolution 20 kSPS four-channel input 1.8 ppm RMS noise two-wire synchronous serial interface AVDD DVDD 20-pin SSOP surface-mount package industrial measurement sensor acquisition process monitoring laboratory instrumentation digital decimation filter noise shaping analog input conditioning
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen