ADS1254EG4 - 24-Bit 20-kSPS 4-Channel ADC | Texas Instruments
MPN: ADS1254EG4 ✓ 啟用中ADS1254EG4 概覽
A delta-sigma ADC is a semiconductor data-conversion device that uses oversampling, digital filtering, and noise shaping to obtain high resolution from a relatively low-bandwidth signal chain. Within the converter hierarchy, the ADS1254EG4 belongs to the precision ADC category and uses a fourth-order sigma-delta modulator architecture. This method is particularly useful when measurement bandwidth is limited but input resolution and rejection of low-frequency noise are more important than very high sampling rates.
The principal features include 24-bit nominal resolution, four single-ended input channels, a maximum conversion rate of 20 kSPS, and differential or single-ended analog input capability. Separate AVDD and DVDD pins allow the analog and digital portions of the circuit to use independently selected supply rails, helping reduce ground coupling between sensitive measurements and digital control signals. A programmable data rate, internal oscillator, and selectable input and reference voltages support adaptable measurement systems.
The delta-sigma conversion architecture prioritizes narrow-band accuracy rather than waveform capture. Its digital decimation filter suppresses out-of-band noise, while the 19-bit effective resolution and 1.8 ppm RMS noise characterize the usable precision of the conversion chain. Because the input bandwidth is intentionally limited, applications must obey the datasheet's filter and settling requirements rather than treating the nominal 24-bit resolution as instantaneous across every possible input frequency.
Typical uses include weighing systems, pressure and temperature measurement, laboratory instrumentation, process monitoring, and portable sensor interfaces. In each case, the device can acquire several low-frequency sensor channels through its serial interface while the host processor performs calibration, filtering, or unit conversion. The four-channel architecture also reduces the number of separate converters required when multiple slow-moving or multiplexed analog signals must be measured.
PCB implementation should preserve the separation between analog inputs, the analog supply return, the digital interface, and the digital return path. Place the required input and decoupling capacitors close to their associated pins, use a quiet analog ground strategy, and route the serial clock and data lines away from sensitive analog nodes. Verify the selected data rate and digital filter settling time before using successive measurements in a control loop.
This page combines manufacturer specifications, package and sourcing details, drop-in replacement analysis, application guidance, and design notes to support both component selection and board-level implementation. It is intended to help engineers evaluate the ADS1254EG4 against pin-compatible alternatives without overlooking the distinctions between resolution, conversion speed, filtering, interface behavior, and supply requirements.
直接替換替代品,適用於 ADS1254EG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADS1254EG4 (相同外形與佔位) — 差異在於 Input Configuration, Package.
ADS1254EG4 最大額定值與電氣特性
| 解析度 | 24 bit |
| Effective Resolution | 19 bit |
| Conversion Rate | 20 kSPS |
| Number of Input Channels | 4 channels |
| Architecture | 1 delta-sigma converter |
| Input Configuration | Single-ended or differential inputs |
| Noise | 1.8 ppm RMS |
| 介面 | Two-wire synchronous serial interface |
| Analog Supply | Separate AVDD pin |
| Digital Supply | Separate DVDD pin |
| 封裝 | 20-pin SSOP |
| 安裝類型 | Surface mount |
ADS1254EG4 20-pin ssop 腳位配置指南
ADS1254EG4(20-pin ssop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: ADS1254EG4.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADS1254EG4 適用於 6 應用s: Industrial Pressure and Load Measurement, Precision Temperature Sensing, Laboratory Instrumentation, Environmental Monitoring, Battery-Powered Portable Instruments, Process Control and Monitoring.
Industrial Pressure and Load Measurement
The ADS1254EG4 fits industrial pressure, force, and load-cell acquisition systems that require more resolution than ordinary 12-bit or 16-bit SAR converters provide. Its four inputs can support several slow-changing bridge or conditioned sensor signals, while the 24-bit nominal resolution and 19-bit effective resolution preserve fine measurement increments. A 20 kSPS maximum conversion rate is more than adequate for many force and pressure systems. The principal design consideration is filter settling: each channel must receive enough time to settle after selection or input switching, and the analog conditioning should minimize noise before conversion.
推薦
Precision Temperature Sensing
The ADS1254EG4 is appropriate for high-accuracy RTD, thermocouple, or linearized temperature measurement when the system values fine resolution over a narrow measurement bandwidth. Four analog inputs reduce converter count in multi-zone temperature systems, while the delta-sigma architecture provides digital filtering and noise shaping. Its 20 kSPS throughput supports relatively quick sampling, but the usable response remains governed by the programmed digital filter and settling period. Use a low-noise reference, a clean analog layout, and an input network that protects the converter from overvoltage and ESD events.
推薦
Laboratory Instrumentation
The ADS1254EG4 can form the measurement front end of laboratory instruments that digitize slow sensor outputs, reference voltages, or multichannel test signals. Its 24-bit resolution and four-input architecture suit precision measurements, and the two-wire synchronous serial interface simplifies connection to an embedded controller. Because the serial clock and data lines are digital signals, isolate them from analog inputs and return the interface current cleanly to the digital ground region. Confirm digital-filter latency before using output samples as immediate feedback in calibration or control routines.
推薦
Environmental Monitoring
The ADS1254EG4 is suitable for environmental monitoring systems that combine several low-frequency analog channels, such as soil, gas, humidity, or water-level sensor outputs. Its four inputs help consolidate multiple measurements, while high nominal resolution is beneficial when the useful change in a sensor signal is small relative to its full-scale range. The device's delta-sigma conversion is well matched to slowly varying environmental quantities and rejects out-of-band noise through digital filtering. Design the external input conditioning for sensor-specific ranges, maintain stable references, and include calibration records because drift at the reference and amplifier stages can dominate system accuracy.
推薦
Battery-Powered Portable Instruments
The ADS1254EG4 can support portable measurement equipment that periodically samples precision sensors rather than capturing high-bandwidth waveforms. Its multiplexed, low-rate conversion profile allows the system to spend more time in measurement activity and less time handling high-rate transient data. The exact power budget depends on the selected data rate, filter configuration, supply voltages, and operating duty cycle, all of which should be confirmed in the manufacturer electrical-characteristics tables. Use the enable or power-control strategy recommended by the datasheet and ensure every shutdown interval preserves the required state of the external system.
推薦
Process Control and Monitoring
The ADS1254EG4 fits process-monitoring equipment that must resolve small changes in pressure, flow, level, or other slowly varying process variables. Four channels allow a compact controller to monitor multiple conditioned signals without using four separate converters, and the high-resolution conversion chain improves visibility near set points. The 20 kSPS maximum rate is generally more than adequate for many slow process loops, but selected filter modes can introduce settling latency. Establish a fixed acquisition cycle, account for multiplexer or filter delay, and keep high-current switching nodes away from the analog input and reference paths.
推薦
工程參考資料,適用於 ADS1254EG4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADS1254E |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 20-pin SSOP | 20-pin SSOP |
| Resolution | 24 bit | 24 bit |
| Effective Resolution | 19 bit | 19 bit |
| Conversion Rate | 20 kSPS | 20 kSPS |
| Input Channels | 4 channels | 4 channels |
| Conversion Architecture | Single delta-sigma converter | Single delta-sigma converter |
| Noise | 1.8 ppm RMS | 1.8 ppm RMS |
| Serial Interface | Two-wire synchronous serial interface | Two-wire synchronous serial interface |
| Supply Architecture | Separate AVDD and DVDD | Separate AVDD and DVDD |
主要差異化特點
- High nominal resolution for narrow-band measurement (對比ADS1254E)
- Four-channel measurement consolidation (對比ADS1254E)
- Separate analog and digital supply architecture (對比ADS1254E)
設計說明
Keep the analog inputs, reference connection, AVDD decoupling, and analog ground return compact and away from the serial clock and data routing. The ADS1254EG4 uses separate AVDD and DVDD connections, so preserve those supply domains on the PCB. Place input and bypass capacitors next to their associated pins, use a continuous ground reference, and avoid routing digital return current beneath the analog input network.
Account for digital-filter settling before using a conversion as a fresh measurement. The usable output delay depends on the selected data rate and decimation-filter configuration. In multiplexed systems, allow the analog input to settle after channel selection, and do not change the input or reference state until the configured acquisition sequence is complete. This prevents partially settled conversions from appearing as sensor drift.
Do not treat nominal 24-bit resolution as unlimited measurement accuracy. Reference-voltage noise, input amplifier offset and drift, resistor tolerances, reference decoupling, and PCB leakage can all reduce the effective result. Use stable precision components, calibrate offset and gain, verify the reference against a higher-accuracy source, and confirm the selected data rate and digital-filter bandwidth against the intended signal spectrum.
合規資訊
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations appear in the cited product-page and distributor data.