Texas Instruments

ADS574AU - 12-Bit 40 kSPS ADC | Texas Instruments

Teilenummer: ADS574AU ✓ Aktiv
+5 V Vdss 28-pin SOIC Package
MOQ: 1 |

ADS574AU Übersicht

Texas Instruments ADS574AU is a 12-bit, microprocessor-compatible sampling CMOS analog-to-digital converter with a maximum conversion time of 25 microseconds and a sampling rate of 40 kSPS, packaged in a 28-pin SOIC. It combines the converter, reference, clock, and microprocessor interface in one device, allowing the ADS574 to replace ADC574 models in most applications without requiring a separate external sample-and-hold circuit.

An ADC is an analog-to-digital converter, a category of data-converter and signal-chain IC that converts a continuously varying analog voltage into a digital code for processing by a microprocessor, microcontroller, DSP, or control system. The ADS574 belongs to the successive-approximation ADC hierarchy. Its internal sampling architecture is intended for systems where an external sample-and-hold amplifier would otherwise increase circuit complexity, cost, and board area.

The principal specifications of the ADS574AU include 12-bit resolution, a 40 kSPS conversion rate, a maximum conversion time of 25 microseconds, and operation from a single +5 V supply. The converter uses a low-power CMOS implementation and an internal capacitor DAC. According to the manufacturer datasheet, it replaces ADC574 models in most applications, eliminates the external sample-and-hold function in most designs, and provides guaranteed AC and DC performance.

The device also integrates a voltage reference, clock, and microprocessor-compatible parallel interface. This integration distinguishes it from modular ADC implementations that require separate reference, clock, and tracking circuits. The internal CDAC and sampling architecture provide a self-contained signal path, while the parallel digital outputs allow an external processor to acquire converted data directly through suitable logic and routing.

Typical uses include industrial process measurement, instrumentation, data acquisition, embedded control, laboratory equipment, and replacement of legacy ADC574-based designs. The 40 kSPS throughput is appropriate for many multiplexed analog measurement systems where accurate conversion is required but high-speed waveform capture is not the primary objective. Existing ADC574 boards may benefit from evaluation of the ADS574's integrated sampling and reference functions.

When designing a replacement circuit, verify signal levels, reference behavior, interface timing, logic levels, and acquisition timing against the ADC574 requirements. The sampling capacitor must acquire the input within the available acquisition interval, so source impedance and settling time can affect accuracy. Confirm the pin arrangement and analog input configuration against the manufacturer datasheet before modifying an existing board.

This product page combines the confirmed converter, interface, timing, package, and application characteristics with practical design guidance. It also distinguishes a true drop-in alternative from merely similar ADC functions and provides procurement, pinout, selection, and replacement guidance for engineers evaluating the ADS574AU.

Drop-in-Alternativen für ADS574AU – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

ADS574AJP+

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 28-pin SOIC
Same ADS574 family, 12-bit architecture, and 28-pin SOIC format; suffix-specific temperature and ordering details differ by 0% for the confirmed core conversion specifications.

📋 Referenzalternative (nicht im Katalog)

ADS574JP+

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 28-pin SOIC
Same ADS574 family, 12-bit architecture, and 28-pin SOIC format; suffix-specific temperature and ordering details differ by 0% for the confirmed core conversion specifications.

📋 Referenzalternative (nicht im Katalog)

ADS574AU Grenzwerte & elektrische Eigenschaften

Auflösung 12 bit
Abtastrate 40 kSPS
Maximum Conversion Time 25 us
Converter Architecture Successive-approximation ADC
Internal Conversion Element CDAC capacitor array
Process Technology Low-power CMOS
Versorgungsspannung +5 V
Number of Analog Inputs 1 input
Output Interface Microprocessor-compatible parallel interface
Integrated Functions Sampling ADC, voltage reference, clock, and microprocessor interface
External Sample-and-Hold Requirement Eliminated in most applications
Gehäuse 28-pin SOIC
Package Code SOP
Package Shape Rectangular
Terminal Form Gull wing
Temperature Grade Commercial
Legacy Compatibility Replacement for ADC574 models in most applications

ADS574AU rectangular Pinbelegungsleitfaden

Pinbelegung für ADS574AU (rectangular-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für ADS574AU im rectangular-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ADS574AU.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ADS574AU ist geeignet für 6 Anwendungs: Industrial Process Measurement, Data-Acquisition Systems, Laboratory Instrumentation, Embedded Control Systems, Legacy ADC574 Board Modernization, Sensor Signal Conditioning.

🏭

Industrial Process Measurement

The ADS574AU fits industrial process-measurement systems that require a compact 12-bit conversion stage with a microprocessor interface. Its 40 kSPS sampling rate supports acquisition of many slowly changing process variables without the external sample-and-hold circuit normally needed in modular ADC designs. The single +5 V supply and integrated reference, clock, and converter functions simplify the analog portion of a controller or data-acquisition board. Designers should still select suitable input protection, isolation, and filtering for the sensor. The acquisition interval must also allow the internal sampling capacitor to settle from the source impedance before conversion begins.

📟

Data-Acquisition Systems

The ADS574AU is appropriate for compact data-acquisition equipment where a 12-bit result and 40 kSPS throughput are sufficient. Its microprocessor-compatible parallel interface allows converted codes to be read by a processor, DSP, or embedded controller, while the internal sampling circuit, reference, and clock reduce the number of discrete analog components. This integration is especially helpful when replacing ADC574-based instrumentation. For multiplexed boards, account for settling time when switching between sensors. Source impedance, leakage from protection diodes, and the input filtering network can affect accuracy and should be evaluated against the required noise and bandwidth targets.

🔬

Laboratory Instrumentation

The ADS574AU can serve as the measurement converter in laboratory instruments that monitor slow or moderately changing analog quantities. Its 12-bit resolution and 25-microsecond maximum conversion time provide a practical balance between measurement resolution and acquisition speed, while integration reduces assembly complexity. The manufacturer identifies the device as an ADC574 replacement in most applications, making it useful for modernizing legacy instruments after the original converter becomes difficult to source. Verify the original board's signal polarity, input range, timing, and digital interface before replacing the converter, and recalibrate analog offset and gain if the reference or signal path changes.

⚙️

Embedded Control Systems

The ADS574AU is suitable for embedded controllers that must monitor analog process inputs using a parallel microprocessor interface. A 40 kSPS conversion rate supports feedback and supervision functions that do not require waveform-grade acquisition, and the maximum 25-microsecond conversion time helps bound control-loop timing. Because the device combines an internal reference, clock, and sampling circuit, a compact controller can use fewer external analog components. The firmware must accommodate the converter's acquisition and conversion interval, and the PCB should keep digital return currents away from sensitive input traces. Verify temperature requirements and power sequencing with the rest of the embedded system.

🔄

Legacy ADC574 Board Modernization

The ADS574AU is particularly relevant to legacy equipment built around ADC574 converters because the manufacturer describes it as a drop-in replacement in most applications. Its integrated sampling, reference, clock, and microprocessor interface can reduce dependence on discrete circuits that may be difficult to maintain. A modernization still requires a pin-by-pin comparison, confirmation of analog input polarity and range, and validation of output coding and control timing. Check whether the original design relied on unusual startup, reset, reference, or sampling behavior. A successful replacement should also repeat the original accuracy, noise, and calibration tests across the operating temperature range.

🧩

Sensor Signal Conditioning

The ADS574AU can serve as the final conversion stage in a sensor interface when the conditioned output falls within the converter's input range. Its 12-bit resolution, internal sampling path, and 40 kSPS rate are suitable for temperature, pressure, position, and slowly varying chemical or industrial sensor measurements. The integrated reference and clock reduce external analog complexity, but conditioning must still provide the required range, bandwidth, anti-alias filtering, and protection. High-impedance sensors may need a buffer with sufficiently low output impedance to satisfy the acquisition interval. Use the manufacturer's timing information to establish a settling time and determine whether a dedicated driver or sample-and-hold stage remains necessary.

Zusammenfassung der empfohlenen Produkte

ADS574AU Texas Instruments Verwendet in: Industrial Process Measurement, Data-Acquisition Systems, Laboratory Instrumentation, Embedded Control Systems, Legacy ADC574 Board Modernization, Sensor Signal Conditioning ADS574AJP+ Same-family SOIC alternative Verwendet in: Industrial Process Measurement, Laboratory Instrumentation, Legacy ADC574 Board Modernization, Sensor Signal Conditioning ADS574JP+ Same-family SOIC alternative Verwendet in: Data-Acquisition Systems, Embedded Control Systems
What are the key specifications of ADS574AU that engineers should know?
The ADS574AU is a 12-bit successive-approximation ADC with a 40 kSPS sampling rate, maximum conversion time of 25 microseconds, and a 28-pin SOIC package. It operates from a single +5 V supply and integrates the sampling circuit, voltage reference, clock, and microprocessor-compatible parallel interface. According to the manufacturer datasheet, the CMOS CDAC implementation also eliminates the external sample-and-hold stage in most applications.
Where can I download the ADS574AU datasheet PDF?
The ADS574AU datasheet PDF is available through the linked technical document listing, and the manufacturer datasheet describes the device as a microprocessor-compatible sampling CMOS analog-to-digital converter. It identifies the 12-bit architecture, 25-microsecond maximum conversion time, integrated reference and clock, and suitability as an ADC574 replacement. Use the pin-description and timing sections of that document when designing a new layout or modifying an existing ADC574 board.
Where can I find the ADS574AU pinout?
The ADS574AU pinout must be taken from the pin-description table in the manufacturer datasheet because the available product listing does not provide a complete numbered pin map. The package is a 28-pin SOIC, so verify all 28 terminal assignments, power connections, analog inputs, and digital output functions before PCB assembly. Do not infer the pinout from a functionally similar ADC unless its exact package and terminal arrangement have been verified.
Can ADS574AU replace an ADC574 in most applications?
Yes, the ADS574AU is described by the manufacturer as a drop-in replacement for ADC574 models in most applications. Its sampling CMOS architecture integrates the reference, clock, conversion circuitry, and microprocessor interface, while eliminating an external sample-and-hold stage in most designs. The legacy design should still be checked for input range, acquisition timing, logic compatibility, reference accuracy, and pin-level functional equivalence before production use.
What can replace ADS574AU?
The closest documented replacements are pin-compatible members of the same ADS574 family, including the 28-pin SOIC ADS574AJP+ and ADS574JP+ variants. Their availability, operating limits, and exact timing characteristics should be confirmed against the required ADC574 legacy interface. A converter with similar resolution or sampling speed is not automatically a drop-in replacement because power pins, control signals, output coding, and acquisition timing must also match.
Is ADS574AU the same as ADS574JP+?
The ADS574AU and ADS574JP+ are members of the same 12-bit, 40 kSPS ADS574 converter family, but they are not necessarily identical in temperature grade, order code, or production qualification. The ADS574AU is listed as a commercial-grade 28-pin SOIC. Confirm the suffix-specific ordering information, operating-temperature limits, and pin compatibility in the manufacturer documentation before treating either device as a substitute.
What is the best Maxim equivalent for ADS574AU?
The MX574AJP+ appears in comparison listings, but it is identified as a 28-pin DIP package and therefore is not a footprint-compatible drop-in replacement for the 28-pin SOIC ADS574AU. A true replacement must match the SOIC footprint and pin assignments as well as the required electrical and timing behavior. Use the Request a Quote form on this page for assistance identifying a currently available, board-compatible option.
When should I choose ADS574AU over ADS574AJP+?
Choose the ADS574AU when the required design uses the exact ADS574AU order code, a commercial temperature grade, and a 28-pin SOIC footprint. Choose ADS574AJP+ only after its suffix-specific ratings and terminal arrangement have been matched to the existing design. The decisive criteria are package geometry, pin compatibility, conversion timing, temperature range, and lifecycle availability rather than nominal resolution alone.
Is ADS574AU suitable for industrial data-acquisition systems?
The ADS574AU is suitable for many data-acquisition and process-measurement applications that need a 12-bit, 40 kSPS converter with a microprocessor interface. Its complete sampling architecture, internal reference, internal clock, and single +5 V operation simplify the analog front end. Industrial suitability still depends on the required operating-temperature range, analog accuracy, isolation design, calibration method, and environmental qualification.
How fast does ADS574AU complete a conversion?
The ADS574AU completes conversion in no more than 25 microseconds and supports a sampling rate of 40 kSPS. According to the manufacturer datasheet, its integrated sampling arrangement eliminates an external sample-and-hold function in most applications. Design the input network so the source can charge the internal sampling capacitor within the acquisition interval; otherwise, input impedance and settling time can degrade measurement accuracy.
Does ADS574AU need an external sample-and-hold circuit?
No external sample-and-hold circuit is required in most applications because the ADS574AU uses an integrated sampling architecture. The converter also includes its reference and clock, reducing the number of external analog-support components. This integration simplifies PCB design, but input drive strength, acquisition time, source impedance, and protection-network leakage still require careful validation for the selected sensor and measurement range.
Where can I buy ADS574AU and check current lead time?
Use the Request a Quote form on this page to request ADS574AU availability, current lead time, order quantities, and the appropriate package or reel configuration. The distributor listing identifies a 28-pin SOIC device, but its snippet does not provide a complete quantity-break schedule or a confirmed in-stock quantity. A sourcing request should state the required quantity, target date, and whether production or prototype quantities are needed.
What is the price of ADS574AU?
Current commercial terms for ADS574AU should be requested through the Request a Quote form on this page. The available listing shows a commercial part description and product identifiers but does not provide a complete quantity-break table suitable for automatic publication. The quote request should include the required order quantity, package suffix, delivery date, and whether the shipment must be traceable.
Is ADS574AU currently in stock?
Current stock status should be confirmed through the Request a Quote form on this page. The available product listing does not explicitly state a confirmed quantity in stock, so the part should not be treated as immediately available without a direct inventory response. Include the required quantity, date code preference, and target delivery schedule in the request to obtain an actionable supply commitment.
What power supply does ADS574AU require?
The ADS574AU operates from a single +5 V supply, with the sample-and-hold, voltage reference, clock, and microprocessor interface consolidated into the converter package. According to the manufacturer datasheet, the low-power CMOS implementation is intended to replace ADC574 designs in most applications. Board-level power planning should still account for digital output loading, input leakage, reference behavior, and the voltage tolerances permitted for the complete circuit.
How do I choose between ADS574AU and a similar 12-bit ADC?
Start with the legacy interface requirement: supply voltage, package and pin geometry, analog-input topology, output coding, control timing, and conversion rate. Then compare resolution, input range, reference accuracy, acquisition behavior, temperature grade, and lifecycle status. The ADS574AU is especially relevant when replacing ADC574 hardware because the manufacturer describes it as compatible in most applications and integrates functions that otherwise require separate components.

Technische Referenzdaten für ADS574AU – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the ADS574AU when maintaining or redesigning an ADC574-based system that uses a 28-pin SOIC and needs a 12-bit, 40 kSPS converter with integrated sampling, reference, clock, and microprocessor interfacing. Its manufacturer-stated compatibility with ADC574 models in most applications makes it the preferred starting point for legacy board modernization. ADS574AJP+ and ADS574JP+ are same-family SOIC candidates when their suffix-specific temperature, qualification, ordering, and lifecycle details match the design. Do not select the MX574AJP+ as a footprint-compatible replacement because it is identified as a DIP-package device. For any alternative, validate pin assignments, input range, output coding, conversion timing, reference behavior, and power sequencing before committing to a production substitution.

Vergleich mit Alternativen

Parameter Dieses Produkt ADS574AJP+ ADS574JP+
Brand Texas Instruments Texas Instruments Texas Instruments
Package 28-pin SOIC 28-pin SOIC 28-pin SOIC
Resolution 12 bit 12 bit 12 bit
Sampling Rate 40 kSPS 40 kSPS 40 kSPS
Conversion Architecture Successive approximation Successive approximation Successive approximation
Maximum Conversion Time 25 us 25 us 25 us
Supply Voltage Single +5 V Single +5 V Single +5 V
Integrated Functions Sampling ADC, reference, clock, and microprocessor interface Sampling ADC, reference, clock, and microprocessor interface Sampling ADC, reference, clock, and microprocessor interface

Wichtigste Unterscheidungsmerkmale

  • Integration reduces the legacy ADC support circuit (vs. MX574AJP+)
  • Direct modernization path for ADC574 designs (vs. ADS574JP+)
  • Same core conversion performance within the ADS574 family (vs. ADS574AJP+)

Designhinweise

Treat this as a legacy-interface migration, not a generic 12-bit ADC substitution. Compare the complete terminal assignments, input polarity and range, output coding, control timing, supply requirements, and acquisition sequence with the original ADC574 implementation. A physically similar converter can still fail at board level if its timing, reference, or digital-control behavior differs. Verify the manufacturer pin-description table and timing diagrams before releasing PCB artwork.

Ensure the analog source can charge the internal sampling capacitor during the available acquisition interval. High source impedance, long PCB tracks, protection-diode leakage, and excessive filter capacitance can produce incomplete settling and conversion error. Locate the input network close to the converter, use a return path that avoids digital switching currents, and validate settling with the required source impedance rather than relying only on nominal conversion time.

Place analog input, power, and ground connections to preserve the integrity of the 12-bit conversion result. Connect the required bypass capacitors directly to the appropriate supply and ground pins using short, low-inductance traces. Route the 12 parallel digital outputs away from the analog input, maintain a consistent reference return, and keep switching or high-current paths out of the converter region. Review the manufacturer layout guidance for the 28-pin SOIC footprint.

The converter operates from a single +5 V supply, but the digital interface and board-level loads can still produce supply transients that influence conversion performance. Confirm the permitted supply range, use local high-frequency bypass capacitance, and isolate analog return currents from processor and switching-converter currents. Validate startup and shutdown behavior because the original ADC574 system may include specific sequencing or reset requirements.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The available product listing identifies the ADS574AU as RoHS associated but does not provide sufficient compliance text for the required certification fields. It is a commercial-grade analog-to-digital converter rather than an automotive-qualified device.

Daten verifiziert am: 2026-11-09 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

ADS574AU datasheet ADS574AU pinout ADS574AU datasheet pdf ADS574AU specifications ADS574AU 28-pin SOIC ADS574AU 12-bit ADC ADS574AU 40 kSPS ADS574AU ADC574 replacement ADS574AU vs ADS574JP+ ADS574AU equivalent ADS574AU replacement Texas Instruments ADS574AU ADS574AU price ADS574AU stock ADS574AU lead time

Verwandte Bauteile & Begriffe

Texas Instruments ADS574AU ADS574AJP+ ADS574JP+ MX574AJP+ ADC574 analog-to-digital converter ADC successive-approximation ADC data-converter IC signal-chain IC microprocessor-compatible interface parallel interface sampling ADC CDAC capacitor DAC low-power CMOS voltage reference integrated clock single +5 V supply 12-bit resolution 40 kSPS 25 microsecond conversion time 28-pin SOIC surface-mount package
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen