ADS574AU - 12-Bit 40 kSPS ADC | Texas Instruments
MPN: ADS574AU ✓ AktifADS574AU Ringkasan
An ADC is an analog-to-digital converter, a category of data-converter and signal-chain IC that converts a continuously varying analog voltage into a digital code for processing by a microprocessor, microcontroller, DSP, or control system. The ADS574 belongs to the successive-approximation ADC hierarchy. Its internal sampling architecture is intended for systems where an external sample-and-hold amplifier would otherwise increase circuit complexity, cost, and board area.
The principal specifications of the ADS574AU include 12-bit resolution, a 40 kSPS conversion rate, a maximum conversion time of 25 microseconds, and operation from a single +5 V supply. The converter uses a low-power CMOS implementation and an internal capacitor DAC. According to the manufacturer datasheet, it replaces ADC574 models in most applications, eliminates the external sample-and-hold function in most designs, and provides guaranteed AC and DC performance.
The device also integrates a voltage reference, clock, and microprocessor-compatible parallel interface. This integration distinguishes it from modular ADC implementations that require separate reference, clock, and tracking circuits. The internal CDAC and sampling architecture provide a self-contained signal path, while the parallel digital outputs allow an external processor to acquire converted data directly through suitable logic and routing.
Typical uses include industrial process measurement, instrumentation, data acquisition, embedded control, laboratory equipment, and replacement of legacy ADC574-based designs. The 40 kSPS throughput is appropriate for many multiplexed analog measurement systems where accurate conversion is required but high-speed waveform capture is not the primary objective. Existing ADC574 boards may benefit from evaluation of the ADS574's integrated sampling and reference functions.
When designing a replacement circuit, verify signal levels, reference behavior, interface timing, logic levels, and acquisition timing against the ADC574 requirements. The sampling capacitor must acquire the input within the available acquisition interval, so source impedance and settling time can affect accuracy. Confirm the pin arrangement and analog input configuration against the manufacturer datasheet before modifying an existing board.
This product page combines the confirmed converter, interface, timing, package, and application characteristics with practical design guidance. It also distinguishes a true drop-in alternative from merely similar ADC functions and provides procurement, pinout, selection, and replacement guidance for engineers evaluating the ADS574AU.
Alternatif penggantian untuk ADS574AU — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
ADS574AJP+
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
ADS574JP+
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
ADS574AU Rating Maksimal & Karakteristik Listrik
| Resolusi | 12 bit |
| Laju Pengambilan Sampel | 40 kSPS |
| Maximum Conversion Time | 25 us |
| Converter Architecture | Successive-approximation ADC |
| Internal Conversion Element | CDAC capacitor array |
| Process Technology | Low-power CMOS |
| Tegangan Pemuat | +5 V |
| Number of Analog Inputs | 1 input |
| Output Interface | Microprocessor-compatible parallel interface |
| Integrated Functions | Sampling ADC, voltage reference, clock, and microprocessor interface |
| External Sample-and-Hold Requirement | Eliminated in most applications |
| Paket | 28-pin SOIC |
| Package Code | SOP |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| Temperature Grade | Commercial |
| Legacy Compatibility | Replacement for ADC574 models in most applications |
ADS574AU rectangular Diamant Konfigurasi Panduan
Konfigurasi pin untuk ADS574AU (rectangular pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk ADS574AU.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
ADS574AU cocok untuk 6 aplikasis: Industrial Process Measurement, Data-Acquisition Systems, Laboratory Instrumentation, Embedded Control Systems, Legacy ADC574 Board Modernization, Sensor Signal Conditioning.
Industrial Process Measurement
The ADS574AU fits industrial process-measurement systems that require a compact 12-bit conversion stage with a microprocessor interface. Its 40 kSPS sampling rate supports acquisition of many slowly changing process variables without the external sample-and-hold circuit normally needed in modular ADC designs. The single +5 V supply and integrated reference, clock, and converter functions simplify the analog portion of a controller or data-acquisition board. Designers should still select suitable input protection, isolation, and filtering for the sensor. The acquisition interval must also allow the internal sampling capacitor to settle from the source impedance before conversion begins.
Direkomendasikan
Data-Acquisition Systems
The ADS574AU is appropriate for compact data-acquisition equipment where a 12-bit result and 40 kSPS throughput are sufficient. Its microprocessor-compatible parallel interface allows converted codes to be read by a processor, DSP, or embedded controller, while the internal sampling circuit, reference, and clock reduce the number of discrete analog components. This integration is especially helpful when replacing ADC574-based instrumentation. For multiplexed boards, account for settling time when switching between sensors. Source impedance, leakage from protection diodes, and the input filtering network can affect accuracy and should be evaluated against the required noise and bandwidth targets.
Direkomendasikan
Laboratory Instrumentation
The ADS574AU can serve as the measurement converter in laboratory instruments that monitor slow or moderately changing analog quantities. Its 12-bit resolution and 25-microsecond maximum conversion time provide a practical balance between measurement resolution and acquisition speed, while integration reduces assembly complexity. The manufacturer identifies the device as an ADC574 replacement in most applications, making it useful for modernizing legacy instruments after the original converter becomes difficult to source. Verify the original board's signal polarity, input range, timing, and digital interface before replacing the converter, and recalibrate analog offset and gain if the reference or signal path changes.
Direkomendasikan
Embedded Control Systems
The ADS574AU is suitable for embedded controllers that must monitor analog process inputs using a parallel microprocessor interface. A 40 kSPS conversion rate supports feedback and supervision functions that do not require waveform-grade acquisition, and the maximum 25-microsecond conversion time helps bound control-loop timing. Because the device combines an internal reference, clock, and sampling circuit, a compact controller can use fewer external analog components. The firmware must accommodate the converter's acquisition and conversion interval, and the PCB should keep digital return currents away from sensitive input traces. Verify temperature requirements and power sequencing with the rest of the embedded system.
Direkomendasikan
Legacy ADC574 Board Modernization
The ADS574AU is particularly relevant to legacy equipment built around ADC574 converters because the manufacturer describes it as a drop-in replacement in most applications. Its integrated sampling, reference, clock, and microprocessor interface can reduce dependence on discrete circuits that may be difficult to maintain. A modernization still requires a pin-by-pin comparison, confirmation of analog input polarity and range, and validation of output coding and control timing. Check whether the original design relied on unusual startup, reset, reference, or sampling behavior. A successful replacement should also repeat the original accuracy, noise, and calibration tests across the operating temperature range.
Direkomendasikan
Sensor Signal Conditioning
The ADS574AU can serve as the final conversion stage in a sensor interface when the conditioned output falls within the converter's input range. Its 12-bit resolution, internal sampling path, and 40 kSPS rate are suitable for temperature, pressure, position, and slowly varying chemical or industrial sensor measurements. The integrated reference and clock reduce external analog complexity, but conditioning must still provide the required range, bandwidth, anti-alias filtering, and protection. High-impedance sensors may need a buffer with sufficiently low output impedance to satisfy the acquisition interval. Use the manufacturer's timing information to establish a settling time and determine whether a dedicated driver or sample-and-hold stage remains necessary.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ADS574AU — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ADS574AJP+ | ADS574JP+ |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC |
| Resolution | 12 bit | 12 bit | 12 bit |
| Sampling Rate | 40 kSPS | 40 kSPS | 40 kSPS |
| Conversion Architecture | Successive approximation | Successive approximation | Successive approximation |
| Maximum Conversion Time | 25 us | 25 us | 25 us |
| Supply Voltage | Single +5 V | Single +5 V | Single +5 V |
| Integrated Functions | Sampling ADC, reference, clock, and microprocessor interface | Sampling ADC, reference, clock, and microprocessor interface | Sampling ADC, reference, clock, and microprocessor interface |
Diferensiator Kunci
- Integration reduces the legacy ADC support circuit (vsMX574AJP+)
- Direct modernization path for ADC574 designs (vsADS574JP+)
- Same core conversion performance within the ADS574 family (vsADS574AJP+)
Catatan Desain
Treat this as a legacy-interface migration, not a generic 12-bit ADC substitution. Compare the complete terminal assignments, input polarity and range, output coding, control timing, supply requirements, and acquisition sequence with the original ADC574 implementation. A physically similar converter can still fail at board level if its timing, reference, or digital-control behavior differs. Verify the manufacturer pin-description table and timing diagrams before releasing PCB artwork.
Ensure the analog source can charge the internal sampling capacitor during the available acquisition interval. High source impedance, long PCB tracks, protection-diode leakage, and excessive filter capacitance can produce incomplete settling and conversion error. Locate the input network close to the converter, use a return path that avoids digital switching currents, and validate settling with the required source impedance rather than relying only on nominal conversion time.
Place analog input, power, and ground connections to preserve the integrity of the 12-bit conversion result. Connect the required bypass capacitors directly to the appropriate supply and ground pins using short, low-inductance traces. Route the 12 parallel digital outputs away from the analog input, maintain a consistent reference return, and keep switching or high-current paths out of the converter region. Review the manufacturer layout guidance for the 28-pin SOIC footprint.
The converter operates from a single +5 V supply, but the digital interface and board-level loads can still produce supply transients that influence conversion performance. Confirm the permitted supply range, use local high-frequency bypass capacitance, and isolate analog return currents from processor and switching-converter currents. Validate startup and shutdown behavior because the original ADC574 system may include specific sequencing or reset requirements.
Informasi Konformitas
The available product listing identifies the ADS574AU as RoHS associated but does not provide sufficient compliance text for the required certification fields. It is a commercial-grade analog-to-digital converter rather than an automotive-qualified device.