AKM (Asahi Kasei Microdevices)

AK4414EQ - 32-Bit 4-Channel 120dB Audio DAC | AKM

Teilenummer: AK4414EQ ✗ Abgekündigt
2.7 V to 3.6 V Vdss 44-LQFP Package
MOQ: 1 |

AK4414EQ Übersicht

The Asahi Kasei Microdevices AK4414EQ is a high-performance 32-bit, four-channel digital-to-analog converter with a stated dynamic range of 120 dB and support for audio data rates up to 216 kHz. The device uses I2S digital audio interfacing and is packaged in a 44-pin LQFP measuring 10 mm by 10 mm. These headline characteristics position it for premium multichannel audio systems where resolution, channel density, and compact integration are important.

An audio DAC is an integrated circuit that converts digital audio samples into analog voltage signals for subsequent amplification, filtering, and output to speakers or headphones. Within the signal chain, it belongs to the broader data-converter hierarchy and operates between a digital audio source and an analog output stage. The AK4414EQ combines four DAC channels with a 32-bit conversion format in one surface-mount package.

The confirmed headline specifications are 32-bit resolution, four DAC channels, 120 dB dynamic range, operation up to 216 kHz, and I2S interface support. Its dual supply information lists a 2.7 V to 3.6 V range for the lower-voltage supply and a 5 V supply. These values are important when matching the converter to the clocking, logic, and analog-output architecture of the host equipment.

The four-channel architecture is particularly useful for multichannel consumer and professional audio equipment. A single AK4414EQ can implement four DAC channels, while the 32-bit format accommodates high-resolution source material and the 216 kHz capability supports high-rate audio streams. The 120 dB dynamic-range figure describes a noise-sensitive conversion function suited to premium playback, monitoring, and networked-audio equipment.

Typical design opportunities include multichannel audio decoders, high-fidelity playback systems, digital mixing consoles, audio interfaces, and home-theater equipment. In these systems, the AK4414EQ can receive I2S-formatted digital audio and provide analog outputs for downstream amplification. The exact output architecture, filter settings, clock requirements, and bypass behavior should be established from the manufacturer datasheet before schematic capture.

PCB implementation requires careful treatment of power, ground, digital clocking, and analog output routing. Keep the DAC power rails and analog outputs away from noisy switching nodes, use low-impedance grounding, and assign the package pins according to the manufacturer pin-description table. Because the verified information does not expose the complete pin list, the pin assignment and exposed-pad connection should be checked directly in the manufacturer datasheet.

This page combines the confirmed AK4414EQ specifications, package information, sourcing guidance, and practical selection context. It also separates confirmed characteristics from parameters that require datasheet review, helping engineers establish a technically sound design without introducing unsupported electrical assumptions.

Drop-in-Alternativen für AK4414EQ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

AK4414EQ Grenzwerte & elektrische Eigenschaften

Product Type 4-channel audio digital-to-analog converter
Converter Resolution 32 bit
Number of DAC Channels 4 channels
Dynamic Range 120 dB
Maximum Audio Data Rate 216 kHz
Digital Audio Interface I2S
DAC Architecture Delta-sigma
Low-Voltage Supply Range 2.7 V to 3.6 V
Analog Supply Voltage 5 V
Package Type 44-LQFP
Package Dimensions 10 mm x 10 mm
Manufacturer Datasheet Length 51 pages
Manufacturer Datasheet File Size 861 Kbytes

AK4414EQ 10 mm x 10 mm Pinbelegungsleitfaden

Pinbelegung für AK4414EQ (10 mm x 10 mm-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für AK4414EQ im 10 mm x 10 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für AK4414EQ.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

AK4414EQ ist geeignet für 6 Anwendungs: Multichannel Home-Theater Decoder, High-Resolution Audio Player, Professional Digital Mixing Console, Digital Audio Interface, Networked Audio Player, Instrument and Measurement Audio Source.

📺

Multichannel Home-Theater Decoder

The AK4414EQ fits a multichannel home-theater decoder requiring four simultaneous analog outputs from a compact converter. Its 32-bit resolution, four-channel DAC architecture, and support for I2S digital audio provide a direct path from a digital audio processor to downstream amplification. The stated 216 kHz operating capability supports high-rate source formats, while the 120 dB dynamic range targets noise-sensitive listening environments. The designer should preserve the converter's required clock relationships, provide the listed 2.7 V to 3.6 V and 5 V supplies, and follow the manufacturer filtering and grounding guidance.

🎧

High-Resolution Audio Player

The AK4414EQ can form the output stage of a high-resolution audio player when four channels or a parallel stereo architecture are required. Its 32-bit conversion format accommodates high-resolution digital streams, and the I2S interface provides a conventional link to a digital audio source. The 120 dB stated dynamic range is appropriate for a low-noise playback path, while operation up to 216 kHz enables high-rate designs. Clock generation, output filtering, analog gain staging, and directivity of the output network require careful implementation for low-distortion performance.

🎚️

Professional Digital Mixing Console

The AK4414EQ is applicable in a professional mixing console where multiple DAC outputs are needed beside a larger digital signal-processing system. Four integrated channels reduce the number of separate converter packages, and the I2S interface supports digital transport from common audio-control architectures. Its 32-bit format and 216 kHz capability suit high-resolution processing workflows, while the 120 dB dynamic-range figure supports low-noise monitoring. To prevent digital-clock and switching-supply contamination, isolate analog outputs, maintain continuous ground references, and follow the manufacturer's recommended component values and layout.

🎙️

Digital Audio Interface

The AK4414EQ can serve as the analog-output stage of a digital audio interface designed around I2S. Its four-channel DAC arrangement supports either four independent outputs or paired stereo configurations, and the 32-bit resolution preserves high-resolution source data during conversion. The 120 dB dynamic range and operation up to 216 kHz make it relevant for studio monitoring and premium playback interfaces. The implementation must accommodate the specified 2.7 V to 3.6 V and 5 V supplies, provide clean master-clock generation, and implement output filtering and grounding that meet the measured noise and distortion targets.

🌐

Networked Audio Player

The AK4414EQ is suitable for a networked music player that receives digital audio from a network processor and requires four high-quality analog outputs. The I2S interface provides a straightforward digital handoff, while the four DAC channels support surround, zone, or multi-room output arrangements. The converter's 32-bit format, 216 kHz capability, and 120 dB stated dynamic range align with premium playback goals. Because network and switching systems can introduce substantial noise, keep the converter supplies and analog outputs away from high-current paths and verify the complete output chain for channel matching, bandwidth, and distortion.

🖥️

Instrument and Measurement Audio Source

The AK4414EQ can provide analog test signals in audio-oriented instrumentation when the system needs four synchronized DAC outputs with high-resolution playback. Its 32-bit conversion, 120 dB stated dynamic range, and support for data rates up to 216 kHz make it useful for generating detailed audio waveforms through an I2S source. The application should still define the required amplitude accuracy, bandwidth, calibration method, and output loading independently. Use the manufacturer filtering guidance, low-noise references, and controlled clocking to prevent converter or board artifacts from obscuring the intended test signal.

What is the AK4414EQ?
The AK4414EQ is a four-channel, 32-bit audio digital-to-analog converter from Asahi Kasei Microdevices with a stated dynamic range of 120 dB and operation up to 216 kHz. According to the manufacturer datasheet, it accepts digital audio through an I2S interface and is housed in a 44-LQFP package measuring 10 mm by 10 mm. It is intended for high-fidelity multichannel audio conversion.
What are the key specifications of AK4414EQ that engineers should know?
The AK4414EQ combines 32-bit resolution, four DAC channels, 120 dB dynamic range, I2S digital audio, and operation up to 216 kHz in a 44-LQFP package. According to the manufacturer datasheet, its listed supply voltages are 2.7 V to 3.6 V and 5 V. These parameters define its principal suitability for high-rate, multichannel premium audio systems.
What is the AK4414EQ package?
The AK4414EQ is packaged in a 44-pin LQFP measuring 10 mm by 10 mm. According to the manufacturer datasheet and component listings, this is a surface-mount integrated-circuit package with 44 terminals. Use the pin-description table and land pattern in the manufacturer documentation when assigning signals and laying out the PCB.
Where can I download the AK4414EQ datasheet PDF?
The AK4414EQ datasheet PDF can be downloaded from the linked AK4414EQ document page on AllDataSheet. The document is indexed as the 51-page manufacturer datasheet for the part and is also linked from the AK4414EQ distributor product page. Confirm the document against the AK4414EQ ordering code before using it for layout or production qualification.
Where can I find the AK4414EQ pinout?
The AK4414EQ pinout is located in the manufacturer datasheet's pin-description and package-outline sections. The verified package information identifies a 44-pin LQFP, but it does not expose the individual pin names. Use the numbering printed on the manufacturer package drawing rather than inferring pin functions from another AKM audio converter with a different package.
What is the difference between the AK4414EQ and a typical audio DAC?
The AK4414EQ differs from a basic audio DAC through its combination of 32-bit conversion, four integrated channels, 120 dB dynamic range, and operation up to 216 kHz. According to the manufacturer datasheet, the device also supports I2S digital audio. These features make it more appropriate for premium multichannel equipment than a basic mono or stereo converter.
Is the AK4414EQ suitable for high-resolution home audio?
The AK4414EQ is suitable for high-resolution home audio designs that require a 32-bit DAC and four analog output channels. According to the manufacturer datasheet, it supports audio rates up to 216 kHz and has a stated dynamic range of 120 dB. Clock configuration, digital filtering, and analog output integration still need to be designed around the application.
Can AK4414EQ be used in a digital mixing console?
The AK4414EQ can be used in a digital mixing console when four analog DAC outputs are required from one device. Its four-channel architecture, 32-bit conversion, I2S interface, and 216 kHz maximum audio rate support high-resolution multichannel routing. The manufacturer datasheet should be consulted for clocking, channel mapping, filtering, and power arrangements.
How does AK4414EQ compare with AK4495EQ?
The AK4414EQ is a four-channel, 32-bit converter with 120 dB dynamic range and operation up to 216 kHz, whereas the AK4495EQ belongs to a different AKM DAC family with different channel, interface, and performance characteristics. Because the verified AK4495EQ specifications are not stated here, do not treat it as a drop-in replacement without checking its package, pinout, clocks, and electrical limits.
When should I choose AK4414EQ over another four-channel audio DAC?
Choose the AK4414EQ when a design specifically requires an AKM four-channel, 32-bit DAC with I2S connectivity, 120 dB stated dynamic range, and operation up to 216 kHz. It is especially relevant when an existing design has been validated around its 44-LQFP footprint and supply architecture. For a new design, compare clocking, filtering, output topology, availability, and lifecycle requirements before committing.
What is the best drop-in replacement for AK4414EQ?
No verified drop-in replacement for the AK4414EQ was established from the available manufacturer and cross-reference information. A valid replacement must match the 44-LQFP footprint, pin functions, I2S timing requirements, supply voltages, clocking, and analog-output characteristics. Use the Request a Quote form on this page to ask for a sourcing review rather than assuming a similarly rated DAC is pin-compatible.
Can another AKM audio DAC replace AK4414EQ without a PCB change?
An AKM audio converter should not be treated as a drop-in replacement unless its exact ordering code has the same 44-LQFP pin assignment and compatible electrical characteristics. The verified search did not identify a confirmed pin-to-pin substitute. Compare the manufacturer datasheets for supply pins, I2S signals, clock inputs, control pins, analog outputs, and exposed-pad requirements before considering a board change.
Where can I buy AK4414EQ online?
Use the Request a Quote form on this page to request AK4414EQ availability, condition, quantity breaks, and current lead time. The part is identified as obsolete in one channel listing, so its commercial status and remaining inventory should be confirmed before a new production order is placed. The form is the appropriate route for current sourcing and traceability information.
What is the price of AK4414EQ?
Current AK4414EQ price and quantity pricing are handled through the Request a Quote form on this page. No qualifying quantity-break table for this exact ordering code was identified, so no static price figure is published here. Because the component is associated with an obsolete lifecycle status, request the current price, lot size, condition, and traceability details before budgeting or purchasing.
What is the lead time for AK4414EQ?
The current AK4414EQ lead time should be requested through the Request a Quote form on this page. Because the part is associated with an obsolete lifecycle status, lead time can depend on remaining factory or channel inventory rather than normal production scheduling. Provide the required quantity, date code, package condition, and production schedule when requesting a quotation.
Is AK4414EQ currently in stock?
AK4414EQ stock status should be confirmed through the Request a Quote form on this page before an order is placed. One distributor listing associates the exact part with obsolete status, while the remaining quantity and lot condition can change between transactions. Request a written stock confirmation that identifies quantity, date code, condition, and traceability.
How should the AK4414EQ power rails be connected?
The AK4414EQ uses a listed 2.7 V to 3.6 V supply and a 5 V supply. According to the manufacturer datasheet, follow the exact pin names, decoupling recommendations, and grounding configuration for those rails. Keep sensitive analog and digital returns organized so switching-current paths do not add unwanted voltage noise to the converter outputs.

Technische Referenzdaten für AK4414EQ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the AK4414EQ when the design needs a dedicated four-channel, 32-bit DAC with I2S connectivity, operation up to 216 kHz, and a stated dynamic range of 120 dB. It is a strong fit for multichannel home-theater equipment, professional mixers, digital audio interfaces, networked players, and premium audio instruments. The component is associated with obsolete lifecycle status, so selection should include a documented review of remaining supply, traceability, and long-term availability. Do not select AK4495EQ, AK5383VS, or AK7755EN as automatic replacements: each belongs to a different product family, and no pin-to-pin equivalence was established. For an existing AK4414EQ PCB, retain the 44-LQFP footprint and verify all signal, clock, supply, and analog functions against the manufacturer datasheet. For a new design, compare the required output topology, digital-filter behavior, clock architecture, measured noise, distortion, channel matching, and lifecycle plan before finalizing the BOM.

Vergleich mit Alternativen

Parameter Dieses Produkt
Brand Asahi Kasei Microdevices
Package 44-LQFP (10 mm x 10 mm)
Product Type 4-channel audio DAC
Converter Resolution 32 bit
Dynamic Range 120 dB
Maximum Audio Rate 216 kHz
Digital Interface I2S
Supply Voltage 2.7 V to 3.6 V and 5 V
Lifecycle Status Obsolete

Wichtigste Unterscheidungsmerkmale

  • Four integrated high-resolution DAC channels (vs. AK4495EQ)
  • High-rate multichannel conversion in a compact package (vs. AK5383VS)
  • Direct four-channel I2S output architecture (vs. AK7755EN)

Designhinweise

Separate the converter's analog outputs and sensitive references from digital clock lines, switching-regulator nodes, and high-speed return currents. Use the manufacturer layout and grounding recommendations as the basis of the PCB stack-up. Keep the DAC output path short, provide a continuous ground reference, and route each supply return directly to its intended decoupling point to reduce voltage drops and shared-current effects.

Design separate, low-noise supply paths for the listed 2.7 V to 3.6 V and 5 V rails, with local high-frequency decoupling placed close to the relevant device pins. Confirm capacitor type, voltage rating, and placement against the manufacturer datasheet. Do not assume that a general-purpose digital supply is acceptable merely because its nominal voltage matches; its noise, impedance, and startup behavior can affect audio performance.

Do not infer pin functions, clock modes, filter settings, or output topology from a similar AKM converter because package assignments can differ even when channel count and resolution match. Check the AK4414EQ pin-description table, master-clock requirements, power-up sequence, and analog-output circuit in the manufacturer datasheet. This prevents footprint-compatible but functionally incompatible substitutions from entering the schematic.

Treat the digital audio interface and master clock as a matched timing system. Use the manufacturer-recommended source and termination arrangements, verify signal levels at the receiving device, and keep the clock path away from analog outputs. Also review whether the selected digital filter mode meets the application's bandwidth and phase requirements before fixing the system-level audio response.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the AK4414EQ is an audio converter rather than an automotive-qualified device.

Ähnliche Suchanfragen

AK4414EQ datasheet AK4414EQ datasheet pdf AK4414EQ pinout AK4414EQ 44-LQFP AK4414EQ 32 bit DAC AK4414EQ 120dB AK4414EQ 216kHz AK4414EQ I2S DAC AK4414EQ four channel DAC AK4414EQ drop-in replacement AK4414EQ equivalent AK4414EQ vs AK4495EQ Asahi Kasei AK4414EQ AK4414EQ price AK4414EQ stock

Verwandte Bauteile & Begriffe

Asahi Kasei Microdevices AKM AK4414EQ AK4495EQ AK5383VS AK7755EN AK5522VN digital-to-analog converter audio DAC delta-sigma DAC four-channel DAC 32-bit audio I2S 120 dB dynamic range 216 kHz 44-LQFP LQFP package surface-mount package 2.7 V to 3.6 V supply 5 V analog supply home-theater audio digital mixing console digital audio interface networked audio player data converter
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen