AK4414EQ - 32-Bit 4-Channel 120dB Audio DAC | AKM
MPN: AK4414EQ ✗ Son Kullanım ZamanıAK4414EQ Genel Bakış
An audio DAC is an integrated circuit that converts digital audio samples into analog voltage signals for subsequent amplification, filtering, and output to speakers or headphones. Within the signal chain, it belongs to the broader data-converter hierarchy and operates between a digital audio source and an analog output stage. The AK4414EQ combines four DAC channels with a 32-bit conversion format in one surface-mount package.
The confirmed headline specifications are 32-bit resolution, four DAC channels, 120 dB dynamic range, operation up to 216 kHz, and I2S interface support. Its dual supply information lists a 2.7 V to 3.6 V range for the lower-voltage supply and a 5 V supply. These values are important when matching the converter to the clocking, logic, and analog-output architecture of the host equipment.
The four-channel architecture is particularly useful for multichannel consumer and professional audio equipment. A single AK4414EQ can implement four DAC channels, while the 32-bit format accommodates high-resolution source material and the 216 kHz capability supports high-rate audio streams. The 120 dB dynamic-range figure describes a noise-sensitive conversion function suited to premium playback, monitoring, and networked-audio equipment.
Typical design opportunities include multichannel audio decoders, high-fidelity playback systems, digital mixing consoles, audio interfaces, and home-theater equipment. In these systems, the AK4414EQ can receive I2S-formatted digital audio and provide analog outputs for downstream amplification. The exact output architecture, filter settings, clock requirements, and bypass behavior should be established from the manufacturer datasheet before schematic capture.
PCB implementation requires careful treatment of power, ground, digital clocking, and analog output routing. Keep the DAC power rails and analog outputs away from noisy switching nodes, use low-impedance grounding, and assign the package pins according to the manufacturer pin-description table. Because the verified information does not expose the complete pin list, the pin assignment and exposed-pad connection should be checked directly in the manufacturer datasheet.
This page combines the confirmed AK4414EQ specifications, package information, sourcing guidance, and practical selection context. It also separates confirmed characteristics from parameters that require datasheet review, helping engineers establish a technically sound design without introducing unsupported electrical assumptions.
Drop-in alternatifler için AK4414EQ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinAK4414EQ Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 4-channel audio digital-to-analog converter |
| Converter Resolution | 32 bit |
| Number of DAC Channels | 4 channels |
| Dynamic Range | 120 dB |
| Maximum Audio Data Rate | 216 kHz |
| Digital Audio Interface | I2S |
| DAC Architecture | Delta-sigma |
| Low-Voltage Supply Range | 2.7 V to 3.6 V |
| Analog Supply Voltage | 5 V |
| Package Type | 44-LQFP |
| Package Dimensions | 10 mm x 10 mm |
| Manufacturer Datasheet Length | 51 pages |
| Manufacturer Datasheet File Size | 861 Kbytes |
AK4414EQ 10 mm x 10 mm Pin Yapısı Kılavuzu
AK4414EQ (10 mm x 10 mm paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: AK4414EQ.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
AK4414EQ için uygundur 6 uygulamas: Multichannel Home-Theater Decoder, High-Resolution Audio Player, Professional Digital Mixing Console, Digital Audio Interface, Networked Audio Player, Instrument and Measurement Audio Source.
Multichannel Home-Theater Decoder
The AK4414EQ fits a multichannel home-theater decoder requiring four simultaneous analog outputs from a compact converter. Its 32-bit resolution, four-channel DAC architecture, and support for I2S digital audio provide a direct path from a digital audio processor to downstream amplification. The stated 216 kHz operating capability supports high-rate source formats, while the 120 dB dynamic range targets noise-sensitive listening environments. The designer should preserve the converter's required clock relationships, provide the listed 2.7 V to 3.6 V and 5 V supplies, and follow the manufacturer filtering and grounding guidance.
Önerilen
High-Resolution Audio Player
The AK4414EQ can form the output stage of a high-resolution audio player when four channels or a parallel stereo architecture are required. Its 32-bit conversion format accommodates high-resolution digital streams, and the I2S interface provides a conventional link to a digital audio source. The 120 dB stated dynamic range is appropriate for a low-noise playback path, while operation up to 216 kHz enables high-rate designs. Clock generation, output filtering, analog gain staging, and directivity of the output network require careful implementation for low-distortion performance.
Önerilen
Professional Digital Mixing Console
The AK4414EQ is applicable in a professional mixing console where multiple DAC outputs are needed beside a larger digital signal-processing system. Four integrated channels reduce the number of separate converter packages, and the I2S interface supports digital transport from common audio-control architectures. Its 32-bit format and 216 kHz capability suit high-resolution processing workflows, while the 120 dB dynamic-range figure supports low-noise monitoring. To prevent digital-clock and switching-supply contamination, isolate analog outputs, maintain continuous ground references, and follow the manufacturer's recommended component values and layout.
Önerilen
Digital Audio Interface
The AK4414EQ can serve as the analog-output stage of a digital audio interface designed around I2S. Its four-channel DAC arrangement supports either four independent outputs or paired stereo configurations, and the 32-bit resolution preserves high-resolution source data during conversion. The 120 dB dynamic range and operation up to 216 kHz make it relevant for studio monitoring and premium playback interfaces. The implementation must accommodate the specified 2.7 V to 3.6 V and 5 V supplies, provide clean master-clock generation, and implement output filtering and grounding that meet the measured noise and distortion targets.
Önerilen
Networked Audio Player
The AK4414EQ is suitable for a networked music player that receives digital audio from a network processor and requires four high-quality analog outputs. The I2S interface provides a straightforward digital handoff, while the four DAC channels support surround, zone, or multi-room output arrangements. The converter's 32-bit format, 216 kHz capability, and 120 dB stated dynamic range align with premium playback goals. Because network and switching systems can introduce substantial noise, keep the converter supplies and analog outputs away from high-current paths and verify the complete output chain for channel matching, bandwidth, and distortion.
Önerilen
Instrument and Measurement Audio Source
The AK4414EQ can provide analog test signals in audio-oriented instrumentation when the system needs four synchronized DAC outputs with high-resolution playback. Its 32-bit conversion, 120 dB stated dynamic range, and support for data rates up to 216 kHz make it useful for generating detailed audio waveforms through an I2S source. The application should still define the required amplitude accuracy, bandwidth, calibration method, and output loading independently. Use the manufacturer filtering guidance, low-noise references, and controlled clocking to prevent converter or board artifacts from obscuring the intended test signal.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: AK4414EQ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Brand | Asahi Kasei Microdevices |
| Package | 44-LQFP (10 mm x 10 mm) |
| Product Type | 4-channel audio DAC |
| Converter Resolution | 32 bit |
| Dynamic Range | 120 dB |
| Maximum Audio Rate | 216 kHz |
| Digital Interface | I2S |
| Supply Voltage | 2.7 V to 3.6 V and 5 V |
| Lifecycle Status | Obsolete |
Ana Farklılayıcılar
- Four integrated high-resolution DAC channels (karşılaştırma:AK4495EQ)
- High-rate multichannel conversion in a compact package (karşılaştırma:AK5383VS)
- Direct four-channel I2S output architecture (karşılaştırma:AK7755EN)
Tasarım Notları
Separate the converter's analog outputs and sensitive references from digital clock lines, switching-regulator nodes, and high-speed return currents. Use the manufacturer layout and grounding recommendations as the basis of the PCB stack-up. Keep the DAC output path short, provide a continuous ground reference, and route each supply return directly to its intended decoupling point to reduce voltage drops and shared-current effects.
Design separate, low-noise supply paths for the listed 2.7 V to 3.6 V and 5 V rails, with local high-frequency decoupling placed close to the relevant device pins. Confirm capacitor type, voltage rating, and placement against the manufacturer datasheet. Do not assume that a general-purpose digital supply is acceptable merely because its nominal voltage matches; its noise, impedance, and startup behavior can affect audio performance.
Do not infer pin functions, clock modes, filter settings, or output topology from a similar AKM converter because package assignments can differ even when channel count and resolution match. Check the AK4414EQ pin-description table, master-clock requirements, power-up sequence, and analog-output circuit in the manufacturer datasheet. This prevents footprint-compatible but functionally incompatible substitutions from entering the schematic.
Treat the digital audio interface and master clock as a matched timing system. Use the manufacturer-recommended source and termination arrangements, verify signal levels at the receiving device, and keep the clock path away from analog outputs. Also review whether the selected digital filter mode meets the application's bandwidth and phase requirements before fixing the system-level audio response.
Uyumluluk Bilgisi
The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the AK4414EQ is an audio converter rather than an automotive-qualified device.