ASDMB-100.000MHZ-LY-T - 100MHz MEMS LVCMOS XO | Abracon
Teilenummer: ASDMB-100.000MHZ-LY-T ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $1.85 | $1,85 |
| 10 | $1.66 | $16,60 |
| 100 | $1.47 | $147,00 |
| 500 | $1.3 | $650,00 |
| 1.000 | $1.13 | $1.130,00 |
| 3.000 | $0.98 | $2.940,00 |
ASDMB-100.000MHZ-LY-T Übersicht
A MEMS oscillator is a silicon-based timing device that replaces traditional quartz crystal oscillators with a silicon MEMS resonator and a Phase-Locked Loop (PLL) synthesizer on the same silicon die. Compared to quartz, MEMS oscillators provide superior shock and vibration resistance, better long-term aging characteristics, faster startup, and lower power consumption. The ASDMB Series combines an Abracon-branded Pure Silicon MEMS resonator with an integrated ASIC, housed in an ultra-miniature 2520 SMD package — making it part of the broader clock oscillator -> frequency control -> timing IC -> semiconductor device hierarchy. The 2520 footprint is one of the smallest standard oscillator packages, enabling compact PCB layouts in space-constrained designs.
Key features include 100 MHz nominal frequency with ±10 ppm stability over the full -40°C to +85°C industrial operating range, wide 1.8 V / 2.5 V / 3.3 V supply compatibility, low 16 mA typical supply current, integrated standby (power-down) pin for power gating, 15 pF LVCMOS output drive at 55% symmetry, and RoHS/RoHS II compliance. The MEMS construction provides superior shock and vibration immunity compared to quartz alternatives.
Architecturally, the ASDMB series combines Abracon's Pure Silicon MEMS resonator with a programmable ASIC PLL synthesizer, eliminating the need for external load capacitors required by bare crystal resonators. This integration delivers tighter frequency stability, faster production lead times, and short lead times for industrial and consumer designs compared to legacy quartz XOs.
Typical applications include Ethernet PHY clocking, networking switches and routers, FPGA and processor reference clocks, industrial automation, and consumer electronics requiring a stable 100 MHz reference. The 2520 package fits space-constrained layouts in IoT endpoints, SSDs, and high-density networking line cards.
When designing with this part, place the standby pin through a 10 kΩ pull-up to VDD for always-on keep power operation, or drive it low for power-down (≤10 µA typ). Maintain clean supply decoupling with a 0.1 µF ceramic capacitor adjacent to the VDD pin. The 4-pad SMD2520 footprint requires standard reflow profile per JEDEC J-STD-020.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet.
Drop-in-Alternativen für ASDMB-100.000MHZ-LY-T – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
ASDMB-100.000MHZ-LR-T
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ASDMB-100.000MHZ-LC-T
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
SiT8008AC-13-100M-100.000000
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
DSC6301JI2BA-100.0000
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ECS-2520MV-100M-B-L-TR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ASDMB-100.000MHZ-LY-T Technische Daten
| Series | ASDMB |
| Manufacturer | Abracon |
| Oscillator Type | XO (Standard) MEMS |
| Nominal Frequency | 100 MHz |
| Frequency Stability | ±10 ppm |
| Output Logic | LVCMOS |
| Output Load | 15 pF |
| Duty Cycle | 55% (typ) |
| Supply Voltage (VDD) | 1.8 V / 2.5 V / 3.3 V |
| Supply Current (typ) | 16 mA |
| Standby / Power-Down | Yes (active-low) |
| Betriebstemperatur | -40°C to +85°C |
| Gehäuse / Bauform | 4-SMD, No Lead (2520) |
| Package Dimensions | 2.5 mm x 2.0 mm x 0.9 mm |
| Pins / Pads | 4 |
| Montageart | Surface Mount |
| ESD Sensitive | Yes |
| RoHS / RoHS II | Compliant |
| Packaging | Tape & Reel (T/R) |
ASDMB-100.000MHZ-LY-T Pin-Konfiguration
| Pin 1 | ST — Standby (power-down); active-low, internal pull-up |
| Pin 2 | GND — Ground |
| Pin 3 | OUT — LVCMOS output (100 MHz) |
| Pin 4 | VDD — Supply voltage (1.8 V to 3.3 V) |
Typische Anwendungen
ASDMB-100.000MHZ-LY-T ist geeignet für 6 Anwendungs: Ethernet PHY Clock Reference, FPGA and Processor Reference Clock, Networking Switches and Routers, Industrial Automation and Control, Solid-State Drive (SSD) Controllers, Consumer Electronics and IoT Endpoints.
Ethernet PHY Clock Reference
The ASDMB-100.000MHZ-LY-T's 100 MHz LVCMOS output and ±10 ppm stability make it ideal as a PHY reference clock for 1G/2.5G Ethernet PHYs requiring a clean 100 MHz reference. According to Abracon's ASDMB series datasheet, its 55% symmetry into 15 pF load and sub-ns jitter deliver the timing margin needed for clean recovered clocks; place it adjacent to the PHY with 0.1 µF VDD decoupling and route the output over an impedance-controlled trace with a series 33 Ω resistor.
Empfohlen
FPGA and Processor Reference Clock
The ASDMB-100.000MHZ-LY-T provides a stable 100 MHz reference for FPGA and processor clock inputs in industrial and embedded designs. Per Abracon's ASDMB datasheet, the part's 1.8 V to 3.3 V supply range matches iMPTL/AMD/Xilinx FPGA clock requirements; its 16 mA typical supply current and integrated standby pin allow power-gating of unused clock domains, freeing power budget in dense designs.
Empfohlen
Networking Switches and Routers
The ASDMB-100.000MHZ-LY-T's MEMS-based 100 MHz LVCMOS output is well suited as a timing reference for networking switch ASICs and router line cards. According to Abracon's ASDMB datasheet, the part's Pure Silicon MEMS construction provides superior shock and vibration immunity versus quartz XOs critical for fan-cooled switches; the integrated standby pin supports IEEE 802.3az Energy-Efficient Ethernet power-down states.
Empfohlen
Industrial Automation and Control
The ASDMB-100.000MHZ-LY-T's -40°C to +85°C industrial operating range and ±10 ppm stability suit PLC, motor control, and industrial sensor interface designs. Per Abracon's datasheet, the MEMS resonator's superior shock tolerance over quartz XOs is ideal for factory-floor vibration environments; its 2520 footprint enables compact DIN-rail and panel-mount module designs.
Empfohlen
Solid-State Drive (SSD) Controllers
The ASDMB-100.000MHZ-LY-T's 100 MHz reference and ultra-miniature 2520 footprint suit SSD controller clocking where board area is severely limited. Per Abracon's datasheet, the MEMS-based construction provides better mechanical resilience than quartz XOs during drop and vibration events - critical for portable SSD designs; its 1.8 V to 3.3 V supply range matches NVMe controller I/O rails.
Empfohlen
Consumer Electronics and IoT Endpoints
The ASDMB-100.000MHZ-LY-T's wide 1.8 V to 3.3 V supply compatibility and standby pin suit battery-backed IoT endpoints and consumer devices. According to Abracon's ASDMB datasheet, the part's ≤10 µA standby current extends battery life in sleep-mode IoT nodes; its 2520 footprint fits smart-home hubs, wireless speakers, and wearables where small form factor is essential.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ASDMB-100.000MHZ-LY-T – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ASDMB-100.000MHZ-LR-T | ASDMB-100.000MHZ-LC-T | SiT8008AC-13-100M-100.000000 | DSC6301JI2BA-100.0000 | ECS-2520MV-100M-B-L-TR |
|---|---|---|---|---|---|---|
| Brand | Abracon | Abracon | Abracon | SiTime | Microchip Technology | ECS Inc. |
| Package | 4-SMD (2520) 2.5x2.0x0.9 mm | 4-SMD (2520) - same | 4-SMD (2520) - same | 4-SMD (2520) - same | 4-SMD (2520) - same | 4-SMD (2520) - same |
| Nominal Frequency | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Frequency Stability | ±10 ppm | Wider stability grade | Commercial grade | ±25 ppm | ±25 ppm | ±50 ppm |
| Supply Voltage | 1.8 V to 3.3 V | 1.8 V to 3.3 V | 1.8 V to 3.3 V | 1.8 V to 3.3 V | 1.8 V to 3.3 V | 1.8 V to 3.3 V |
| Standby Pin | Yes | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature | -40°C to +85°C | -40°C to +85°C | -20°C to +70°C | -20°C to +70°C | -40°C to +85°C | -40°C to +85°C |
Wichtigste Unterscheidungsmerkmale
- Pure Silicon MEMS construction (vs. ECS-2520MV-100M-B-L-TR (quartz XO))
- Industry-standard 4-pad 2520 pinout (vs. DSC6301JI2BA-100.0000 (Microchip))
- Wide 1.8 V to 3.3 V supply compatibility (vs. SiT8008AC-13-100M-100.000000 (SiTime))
Designhinweise
Place the ASDMB-100.000MHZ-LY-T as close as possible to the receiver's clock input pin to minimize trace length and reflections. Per Abracon's ASDMB series datasheet, route the LVCMOS output over an impedance-controlled 50 Ω trace with a series 33 Ω damping resistor placed near the oscillator output; this reduces overshoot/undershoot on fast edges into capacitive loads.
Decouple the VSD pin (pin 4) with a 0.1 µF X7R ceramic placed within 2-5 mm of the IC, plus a bulk 10 µF tantalum or ceramic capacitor on the same supply rail. The ASDMB datasheet specifies 16 mA typical supply current at 3.3 V; insufficient decoupling can cause jitter and frequency instability.
Avoid placing the ASDMB-100.000MHZ-LY-T adjacent to noisy switching regulators or high-current traces. Per Abracon's ASDMB datasheet, the MEMS resonator can pick up EMI from nearby switchers - keep at least 5 mm separation or use a ground guard trace around the oscillator footprint on outer layers.
Do not leave the standby pin floating - it has an internal pull-up but noise on the pin can cause intermittent output disable. The ASDMB datasheet recommends tying ST to VSD through a 10 kΩ pull-up for always-on keep power operation; drive low only when intentional power-down is desired.
Compliance-Informationen
RoHS/RoHS II compliant per Abracon product page. ESD sensitive device. Not AEC-Q100 qualified - this is industrial/consumer only.