ATSAMS70N21A-CN - 300MHz Cortex-M7 MCU | Microchip
Teilenummer: ATSAMS70N21A-CN ✓ AktivATSAMS70N21A-CN Übersicht
A flash microcontroller is a semiconductor device that combines a processor core, embedded program memory, data memory, and peripherals on one integrated circuit. The ATSAMS70N21A-CN sits within the hierarchy of embedded microcontroller, 32-bit MCU, ARM Cortex-M7 processor, and flash-memory system controller. Its combination of 300 MHz processing speed and 2 MB of internal Flash makes it suitable for control-intensive products that need substantial local program storage without an external memory device.
Key characteristics include 2 MB of Flash organized as 2M x 8, 384 KB of SRAM, a 32-bit single-core architecture, and operation from 1.8 V, 2.5 V, or 3.3 V according to the manufacturer listings. The device provides 75 I/O in the 100-ball package, allowing integration of communications, control signals, analog inputs, and external interfaces while retaining a compact 9 mm by 9 mm surface-mount footprint.
The ARM Cortex-M7 core includes an FPU and supports a high clock rate for applications involving motor control, industrial automation, networking, graphics, and embedded user interfaces. The manufacturer identifies the ATSAMS70N21 devices as members of the SAM S70 flash-microcontroller family. Internal SRAM is especially useful for buffering network frames, protocol stacks, display data, or real-time control variables without relying on slow external memory for every access.
Typical applications include industrial factory controllers, high-speed communication gateways, precision motion-control systems, connected sensors, medical monitoring equipment, and compact embedded computing platforms. The 100-TFBGA package minimizes board area but requires careful PCB layout and manufacturing support because its fine-pitch ball grid cannot be hand soldered with conventional through-hole techniques.
A critical design consideration is the relationship between operating voltage, clock rate, and thermal performance. Review the maximum operating frequency for the selected supply voltage in the manufacturer datasheet, and verify all power rails during startup and shutdown. The TFBGA package also requires a properly designed footprint, fine-pitch assembly process, adequate thermal design, and thorough signal-integrity review.
This product summary combines the manufacturer device-page information with practical package, procurement, comparison, and PCB-design guidance. It helps engineers evaluate the ATSAMS70N21A-CN against same-package alternatives while separating true electrical compatibility from differences in memory density, temperature grade, or delivery format.
Drop-in-Alternativen für ATSAMS70N21A-CN – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ATSAMS70N21A-CN (gleiche Bauform und Footprint) – abweichend in SRAM, Mounting Type, Package, ADC, CAN.
ATSAME70N21A-CN
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →ATSAMS70N21A-CBT
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ATSAMS70N21A-CNT
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ATSAME70N20A-CN
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →ATSAMS70N21A-CN Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit ARM Cortex-M7 flash microcontroller |
| Processor Core | ARM Cortex-M7 with Floating Point Unit |
| Core Architecture | 32-bit single-core |
| Maximum CPU Frequency | 300 MHz |
| Program Memory Size | 2 MB Flash |
| Flash Organization | 2M x 8 |
| SRAM Size | 384 KB |
| Number of I/O | 75 I/O |
| Operating Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Gehäuse | 100-ball TFBGA, 9 mm x 9 mm |
| Montageart | Surface mount |
| Delivery Format | Tray |
| Flash Microcontroller Family | SAM S70 |
| FPU Support | Yes |
ATSAMS70N21A-CN 100-ball tfbga, 9 mm x 9 mm Pinbelegungsleitfaden
Pinbelegung für ATSAMS70N21A-CN (100-ball tfbga, 9 mm x 9 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für ATSAMS70N21A-CN.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ATSAMS70N21A-CN ist geeignet für 6 Anwendungs: Industrial Automation Controller, Precision Motor Control, Industrial Communication Gateway, Connected Sensor Node, Medical Monitoring Equipment, Embedded Human-Machine Interface.
Industrial Automation Controller
The ATSAMS70N21A-CN fits industrial automation controllers that combine real-time sampling with protocol handling and local control logic. Its 300 MHz ARM Cortex-M7 core provides computational headroom for motion algorithms, while 384 KB of SRAM supports task stacks, control variables, and communication buffers. The 2 MB of internal Flash can hold application firmware, diagnostics, and configuration data. In a controller, the MCU would operate alongside communication interfaces, analog front ends, and digital I/O. The 75 available I/O support external control signals, but the 100-ball TFBGA requires fine-pitch assembly and a carefully validated power layout.
Empfohlen
Precision Motor Control
The ATSAMS70N21A-CN is suitable for high-performance motor-control systems requiring fast control-loop execution and substantial embedded memory. Its 300 MHz Cortex-M7 core and FPU can support filtering, transformations, and real-time control calculations, while 2 MB of Flash accommodates firmware, tuning data, and diagnostic routines. The 75 I/O provide interfaces for encoders, control signals, communication links, and protection functions. System designers must still verify timer, PWM, ADC, and trigger mappings in the manufacturer pin table. Thermal performance and supply integrity also require attention because sustained processor activity can increase junction temperature inside the compact 9 mm by 9 mm TFBGA.
Empfohlen
Industrial Communication Gateway
The ATSAMS70N21A-CN can serve as the processing element in a communication gateway that converts between industrial or enterprise protocols. The 300 MHz Cortex-M7 core handles protocol state machines, data transformation, and concurrent tasks, while 384 KB of SRAM provides useful working space for packet assembly and buffering. Its 2 MB of internal Flash allows substantial firmware to be stored locally for boot, networking, diagnostics, and field-service functions. The MCU can manage several serial interfaces and external transceivers, but pin multiplexing and peripheral assignments must be checked for the exact package. For gateways requiring secure updates and continuous uptime, validate watchdog behavior, flash endurance, and fault recovery during design qualification.
Empfohlen
Connected Sensor Node
The ATSAMS70N21A-CN can support connected sensor nodes that perform local filtering, event detection, and protocol conversion before sending data upstream. Its 300 MHz Cortex-M7 processing speed allows more computation near the sensor than a basic low-power MCU, while 384 KB of SRAM helps hold time-series buffers, calibration tables, and network state. The 2 MB of Flash provides room for sensor drivers, communication stacks, and firmware updates. With 75 I/O, the device can interface to digital sensors, analog front ends, and wireless or wired communication components. A practical design must balance the available processing performance against the power budget, and it must verify the permitted clock and voltage combinations in the manufacturer electrical tables.
Empfohlen
Medical Monitoring Equipment
The ATSAMS70N21A-CN is suitable for monitoring and diagnostic equipment where local signal processing, reliable control, and substantial firmware storage are important. The ARM Cortex-M7 FPU operating at up to 300 MHz can execute filtering and numerical operations, while 384 KB of SRAM accommodates sample buffers and working state. The 2 MB of Flash can store acquisition firmware, calibration information, diagnostics, and boot code. Medical designs require careful separation of analog and digital sections, validated low-noise power distribution, and complete review of safety, EMC, and environmental requirements. Because the ATSAMS70N21A-CN is not described as AEC-Q100 qualified, it should not be assumed suitable for automotive-grade qualification without an appropriate qualified ordering option.
Empfohlen
Embedded Human-Machine Interface
The ATSAMS70N21A-CN can serve as the controller for a compact display or touch-based human-machine interface. Its 300 MHz Cortex-M7 core manages graphics updates, input handling, and application logic, while 384 KB of SRAM provides space for display buffers and interface state. The 2 MB of Flash can hold the interface application, fonts, assets, and operating firmware. The 75 I/O support connections to a display controller, touch controller, buttons, and communication peripherals. Designers should partition high-speed display signals from sensitive analog paths and verify signal integrity against the TFBGA escape-routing requirements. The compact 9 mm by 9 mm package helps minimize board area, although assembly yield and inspection must be considered during volume manufacturing.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ATSAMS70N21A-CN – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ATSAME70N21A-CN | ATSAMS70N21A-CBT | ATSAMS70N21A-CNT | ATSAME70N20A-CN |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) |
| Processor Core | ARM Cortex-M7 with FPU | ARM Cortex-M7 with FPU | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 with FPU |
| Maximum CPU Frequency | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz |
| Program Memory | 2048 KB Flash | 2048 KB Flash | 2048 KB Flash | 2048 KB Flash | 1024 KB Flash |
| Device Family | SAM S70 | SAM E70 | SAM S70 | SAM S70 | SAM E70 |
Wichtigste Unterscheidungsmerkmale
- Higher Flash capacity than the reduced-memory same-package candidate (vs. ATSAME70N20A-CN)
- S70-family device selection for designs standardized on the S70 peripheral set (vs. ATSAME70N21A-CN)
- Identical headline processing and memory characteristics within the ATSAMS70N21A ordering family (vs. ATSAMS70N21A-CBT)
Designhinweise
Design the PCB footprint directly from the manufacturer package drawing for the 100-ball TFBGA rather than treating it as a generic BGA. Confirm ball pitch, pad size, solder-mask definition, and courtyard dimensions. Place decoupling capacitors close to the relevant power balls, provide adequate via access beneath the device where recommended, and maintain the manufacturer-defined assembly and soldering profile. The ATSAMS70N21A-CN cannot be assembled with a standard through-hole or coarse-pitch SMT process.
The ATSAMS70N21A-CN supports 1.8 V, 2.5 V, or 3.3 V configurations, but the maximum CPU frequency can depend on the selected supply. Use separate, low-impedance power distribution for the core and I/O domains if required by the device architecture, and check all voltage limits in the Microchip manufacturer electrical tables. Validate startup sequencing, brownout behavior, and regulator transient response before enabling the full 300 MHz operating frequency.
Estimate junction temperature from worst-case processor activity, ambient temperature, board construction, and package thermal resistance before production release. The TFBGA is small, so its limited copper attachment can make thermal performance highly dependent on PCB vias and surrounding copper. Use the manufacturer maximum operating-temperature limits for the exact ordering code and add thermal test points near the device. Do not substitute a package drawing from the -CNT ordering option when validating the ATSAMS70N21A-CN tray configuration.
Avoid treating every same-package MCU as a functional replacement. ATSAME70N21A-CN is an E70-family candidate, while ATSAMS70N21A-CBT and ATSAMS70N21A-CNT have different ordering suffixes that can encode grade, qualification, or delivery differences. Compare the complete pin-multiplexing table, peripheral inventory, electrical limits, boot behavior, and errata before approving a substitution. Firmware should also be retested for every approved alternate device.
Compliance-Informationen
RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering code through the Microchip manufacturer product documentation.