ATTINY416-MNR - 20MHz 4KB AVR MCU | Microchip Technology
Teilenummer: ATTINY416-MNR ✓ AktivATTINY416-MNR Übersicht
A microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, volatile data memory, and peripherals on one integrated circuit. The ATTINY416 belongs to the tinyAVR family, a 32-bit-footprint, low-power branch of 8-bit AVR microcontrollers used for embedded control. Its combination of modest memory, event handling, accurate analog functions, and communication peripherals makes it suitable for compact control systems that need more capability than a basic logic device.
The device provides 4 KB of Flash for firmware, 256 bytes of SRAM for working data, and 128 bytes of EEPROM for nonvolatile parameter storage. The AVR core includes a hardware multiplier and can operate at up to 20 MHz. Peripherals include the Event System, SleepWalking, accurate analog features, and advanced peripherals described by Microchip for the tinyAVR 1-series. These functions support responsive event-driven firmware and low-power peripheral operation.
The ATTINY416-MNR uses a 20-pin VQFN package measuring 3 mm by 3 mm, with an exposed pad that also serves as the ground connection. This compact surface-mount construction requires careful PCB layout and adequate exposed-pad thermal management. Although the package is small, its peripheral integration reduces the need for external components in sensor, control, and communication-oriented embedded products.
Typical uses include industrial sensing modules, compact sensor nodes, building-control accessories, consumer products, embedded instrumentation, and low-power control boards. The ATtiny416 family is also associated with evaluation and development platforms, including ATtiny416-based Xplained-style hardware. Developers can evaluate the MCU with Microchip tooling while using the 4 KB Flash budget for small control tasks, data acquisition, and peripheral coordination.
A key design consideration is exposed-pad layout. Connect the exposed pad to ground using a solid copper plane and vias, and follow the manufacturer land-pattern and solder-reflow guidance. This helps reduce thermal resistance and prevents pad-related soldering issues. Confirm the selected device’s operating-voltage limits and peripheral characteristics in the manufacturer datasheet before finalizing the power architecture.
This page combines the manufacturer’s device specifications with practical package guidance, sourcing information, and a focused drop-in comparison. It also identifies the constraints engineers must evaluate before treating a substitute as a true replacement: package dimensions, pin functions, clock rating, memory capacity, peripheral compatibility, and firmware support.
Drop-in-Alternativen für ATTINY416-MNR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit ATTINY416-MNR (gleiche Bauform und Footprint) – abweichend in Flash Memory, Functional Safety, Package, Package Type, SRAM.
ATTINY816-MNR
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
ATTINY416-MNR Grenzwerte & elektrische Eigenschaften
| Product Type | 8-bit AVR tinyAVR 1-series microcontroller |
| Maximum CPU Clock | 20 MHz |
| Processor Architecture | AVR RISC with hardware multiplier |
| Flash Memory | 4 KB (4K x 8) |
| SRAM | 256 bytes |
| EEPROM | 128 bytes |
| Event System | Yes |
| SleepWalking | Yes |
| Analog Features | Accurate analog features |
| Gehäuse | 20-VQFN (3 mm x 3 mm) |
| Package Type | VQFN |
| Montageart | Surface mount |
| Functional Safety | tinyAVR 1, Functional Safety (FuSa) |
ATTINY416-MNR vqfn Pinbelegungsleitfaden
Pinbelegung für ATTINY416-MNR (vqfn-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für ATTINY416-MNR.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ATTINY416-MNR ist geeignet für 6 Anwendungs: Compact Industrial Sensor Modules, Low-Power IoT Sensor Nodes, Building Control Accessories, Embedded Data Acquisition, Consumer Control Accessories, ATtiny416 Evaluation Platforms.
Compact Industrial Sensor Modules
The ATTINY416-MNR fits compact sensor modules that must acquire a signal, apply control logic, and report a measurement through a serial interface. Its 20 MHz AVR core provides useful processing headroom for filtering and state management, while 4 KB of Flash accommodates a focused application rather than a large software framework. The 256-byte SRAM supports temporary data handling, and 128 bytes of EEPROM can retain calibration or configuration values. The integrated Event System can coordinate peripheral events, while SleepWalking supports low-power operation. Keep analog and digital grounding separated, provide stable supply bypassing, and confirm the operating-temperature requirements for the industrial environment.
Empfohlen
Low-Power IoT Sensor Nodes
The ATTINY416-MNR is appropriate for small battery-powered IoT sensor nodes where the firmware must remain responsive without relying on a high-power processor. SleepWalking allows supported peripherals to trigger MCU activity, and the Event System supports event-driven control instead of continuous polling. The 20 MHz clock and 4 KB Flash suit compact sensing, threshold detection, and communication-state tasks, while EEPROM provides a small nonvolatile configuration area. Avoid adding a communications stack that exhausts the 4 KB program-memory budget; ATTINY816-MNR may be preferable when the same board and firmware foundation can use 8 KB of Flash.
Empfohlen
Building Control Accessories
The ATTINY416-MNR can serve as the controller in compact building-control accessories such as sensor interfaces, zone controllers, or actuator adapters. Its integrated analog features suit measurement and threshold functions, while the 20 MHz AVR core can manage debouncing, state transitions, and communications. The 3 mm by 3 mm VQFN footprint helps limit board area in wall-mounted or distributed-control products. Because the MCU has only 4 KB of Flash, keep firmware modular and event-oriented. Use a solid exposed-pad ground plane, isolate sensitive analog routing from switching nodes, and verify all timing and electrical limits in the intended installation environment.
Empfohlen
Embedded Data Acquisition
The ATTINY416-MNR suits small data-acquisition products that sample a limited number of analog channels, perform local calculations, and transfer results through embedded peripherals. The device combines accurate analog features with a 20 MHz AVR processor, enabling configurable sampling and event handling without a larger microcontroller. Its 4 KB Flash is suitable for compact acquisition routines, and 256 bytes of SRAM provides limited working space for buffering and status variables. Keep acquisition timing independent from unnecessary background activity, place bypass capacitors close to the supply pins, and use the manufacturer pin-multiplexing table to assign analog and communications functions without conflicts.
Empfohlen
Consumer Control Accessories
The ATTINY416-MNR is well matched to compact consumer accessories that combine a simple user interface, sensor input, and local actuator control. A 20 MHz AVR core can handle debouncing, state-machine logic, and peripheral coordination, while the Event System supports responsive behavior without continuous polling. The 20-VQFN package helps minimize product size, and 4 KB of Flash can support a deliberately small feature set. Use ATTINY816-MNR when the user interface or protocol handling requires more program space without changing the PCB package. Validate button, display, and communication signal levels so the MCU operates within the manufacturer’s electrical limits.
Empfohlen
ATtiny416 Evaluation Platforms
The ATTINY416-MNR is suitable for compact ATtiny416 evaluation hardware and application prototypes because it combines a 20 MHz AVR core, 4 KB of Flash, and advanced tinyAVR peripherals on a small 3 mm by 3 mm package. ATtiny416-based Xplained-style platforms provide a practical environment for evaluating programming, debugging, analog functions, and event-driven behavior. Keep the prototype layout representative of the final product by including a properly connected exposed pad and stable supply bypassing. If the prototype firmware approaches the 4 KB Flash limit, migrate to ATTINY816-MNR for 8 KB before release rather than reducing reliability through tightly packed code.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ATTINY416-MNR – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ATTINY816-MNR |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 20-VQFN (3 mm x 3 mm) | 20-VQFN (3 mm x 3 mm) |
| Maximum CPU Clock | 20 MHz | 20 MHz |
| Flash Memory | 4 KB | 8 KB |
| SRAM | 256 bytes | 256 bytes |
| EEPROM | 128 bytes | 128 bytes |
| Processor Architecture | 8-bit AVR with hardware multiplier | 8-bit AVR with hardware multiplier |
| Event System | Yes | Yes |
| SleepWalking | Yes | Yes |
Wichtigste Unterscheidungsmerkmale
- Lower Flash allocation for focused embedded tasks (vs. ATTINY816-MNR)
- Same-family upgrade path without increasing clock speed (vs. ATTINY816-MNR)
- Compact exposed-pad implementation (vs. ATTINY816-MNR)
Designhinweise
Use the manufacturer’s 20-VQFN land pattern rather than a generic three-pad QFN footprint. The ATTINY416-MNR measures 3 mm by 3 mm, and its exposed pad is an electrical and thermal connection that must be soldered according to the package drawing. Confirm solder-mask and paste geometry, place the exposed pad on a continuous ground plane, and add multiple thermal vias near the center while maintaining clearance from sensitive analog and communication routes.
Place the supply bypass capacitor as close as practical to the VDD and ground connections, and route the exposed pad directly to a low-impedance ground plane. Decoupling requirements must be confirmed in the manufacturer datasheet because the correct capacitance, voltage rating, and ESR range depend on the device and clock configuration. Avoid splitting the ground return beneath the MCU, since even a small loop between the supply capacitor and pad can increase switching noise and reduce measurement accuracy.
Assign pins by function and then verify every alternate-function mapping in the manufacturer pin table. The 20-VQFN footprint provides limited routing escape options, and analog, communications, and timer functions may share pins. Route sensitive analog inputs away from digital clocks, high-current outputs, and inductor switching nodes. If the firmware later exceeds the 4 KB Flash budget, prefer a planned family migration to ATTINY816-MNR instead of adding board-level rework.
Do not treat ATTINY416-MNR, ATTINY416-MBT-VAO, and other suffix variants as interchangeable without checking the package dimensions, pin functions, temperature grade, and ordering configuration. The MNR suffix identifies a specific 20-VQFN 3 mm by 3 mm tape-and-reel configuration. Likewise, a shared package name alone does not establish drop-in compatibility; verify the exposed-pad arrangement and every signal assignment before releasing a substitution to production.
Compliance-Informationen
No definitive compliance declaration for the exact ATTINY416-MNR suffix was included. The automotive ATtiny416/417/816/817 document is a separate family document and does not establish automotive qualification for the standard ATTINY416-MNR.