Microchip Technology

ATTINY416-MNR - 20MHz 4KB AVR MCU | Microchip Technology

MPN: ATTINY416-MNR ✓ Aktif
20-VQFN (3 mm x 3 mm) Package 20 MHz Speed 4 KB (4K x 8) Memory
MOQ: 1 |

ATTINY416-MNR Ringkasan

The Microchip Technology ATTINY416-MNR is an 8-bit tinyAVR 1-series microcontroller with a 20 MHz maximum clock, 4 KB of Flash memory, 256 bytes of SRAM, and 128 bytes of EEPROM in a 20-VQFN surface-mount package. It combines an AVR processor with a hardware multiplier and integrated Event System and SleepWalking capabilities.

A microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, volatile data memory, and peripherals on one integrated circuit. The ATTINY416 belongs to the tinyAVR family, a 32-bit-footprint, low-power branch of 8-bit AVR microcontrollers used for embedded control. Its combination of modest memory, event handling, accurate analog functions, and communication peripherals makes it suitable for compact control systems that need more capability than a basic logic device.

The device provides 4 KB of Flash for firmware, 256 bytes of SRAM for working data, and 128 bytes of EEPROM for nonvolatile parameter storage. The AVR core includes a hardware multiplier and can operate at up to 20 MHz. Peripherals include the Event System, SleepWalking, accurate analog features, and advanced peripherals described by Microchip for the tinyAVR 1-series. These functions support responsive event-driven firmware and low-power peripheral operation.

The ATTINY416-MNR uses a 20-pin VQFN package measuring 3 mm by 3 mm, with an exposed pad that also serves as the ground connection. This compact surface-mount construction requires careful PCB layout and adequate exposed-pad thermal management. Although the package is small, its peripheral integration reduces the need for external components in sensor, control, and communication-oriented embedded products.

Typical uses include industrial sensing modules, compact sensor nodes, building-control accessories, consumer products, embedded instrumentation, and low-power control boards. The ATtiny416 family is also associated with evaluation and development platforms, including ATtiny416-based Xplained-style hardware. Developers can evaluate the MCU with Microchip tooling while using the 4 KB Flash budget for small control tasks, data acquisition, and peripheral coordination.

A key design consideration is exposed-pad layout. Connect the exposed pad to ground using a solid copper plane and vias, and follow the manufacturer land-pattern and solder-reflow guidance. This helps reduce thermal resistance and prevents pad-related soldering issues. Confirm the selected device’s operating-voltage limits and peripheral characteristics in the manufacturer datasheet before finalizing the power architecture.

This page combines the manufacturer’s device specifications with practical package guidance, sourcing information, and a focused drop-in comparison. It also identifies the constraints engineers must evaluate before treating a substitute as a true replacement: package dimensions, pin functions, clock rating, memory capacity, peripheral compatibility, and firmware support.

Alternatif penggantian untuk ATTINY416-MNR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian ATTINY416-MNR (sama faktor bentuk dan footprint) — berbeda di dalam Flash Memory, Functional Safety, Package, Package Type, SRAM.

Microchip Technology
Flash Memory: 8 KB
Functional Safety: Functional Safety (FuSa) Microcontroller
Package: 20-pin VQFN, 3 mm x 3 mm
Bandingkan dengan ATTINY416-MNR →

ATTINY816-MNR

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 20-VQFN (3 mm x 3 mm)
Flash increases from 4 KB to 8 KB (+100%); CPU speed remains 20 MHz, SRAM remains 256 bytes, and EEPROM remains 128 bytes

📋 Alternatif referensi (tidak dalam katalog)

ATTINY416-MNR Rating Maksimal & Karakteristik Listrik

Product Type 8-bit AVR tinyAVR 1-series microcontroller
Maximum CPU Clock 20 MHz
Processor Architecture AVR RISC with hardware multiplier
Flash Memory 4 KB (4K x 8)
SRAM 256 bytes
EEPROM 128 bytes
Event System Yes
SleepWalking Yes
Analog Features Accurate analog features
Paket 20-VQFN (3 mm x 3 mm)
Package Type VQFN
Tipe Mounting Surface mount
Functional Safety tinyAVR 1, Functional Safety (FuSa)

ATTINY416-MNR vqfn Diamant Konfigurasi Panduan

Konfigurasi pin untuk ATTINY416-MNR (vqfn pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai vqfn untuk ATTINY416-MNR

Tidak ada data diatribut pin yang tersedia untuk ATTINY416-MNR.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

ATTINY416-MNR cocok untuk 6 aplikasis: Compact Industrial Sensor Modules, Low-Power IoT Sensor Nodes, Building Control Accessories, Embedded Data Acquisition, Consumer Control Accessories, ATtiny416 Evaluation Platforms.

🏭

Compact Industrial Sensor Modules

The ATTINY416-MNR fits compact sensor modules that must acquire a signal, apply control logic, and report a measurement through a serial interface. Its 20 MHz AVR core provides useful processing headroom for filtering and state management, while 4 KB of Flash accommodates a focused application rather than a large software framework. The 256-byte SRAM supports temporary data handling, and 128 bytes of EEPROM can retain calibration or configuration values. The integrated Event System can coordinate peripheral events, while SleepWalking supports low-power operation. Keep analog and digital grounding separated, provide stable supply bypassing, and confirm the operating-temperature requirements for the industrial environment.

🧩

Low-Power IoT Sensor Nodes

The ATTINY416-MNR is appropriate for small battery-powered IoT sensor nodes where the firmware must remain responsive without relying on a high-power processor. SleepWalking allows supported peripherals to trigger MCU activity, and the Event System supports event-driven control instead of continuous polling. The 20 MHz clock and 4 KB Flash suit compact sensing, threshold detection, and communication-state tasks, while EEPROM provides a small nonvolatile configuration area. Avoid adding a communications stack that exhausts the 4 KB program-memory budget; ATTINY816-MNR may be preferable when the same board and firmware foundation can use 8 KB of Flash.

🏠

Building Control Accessories

The ATTINY416-MNR can serve as the controller in compact building-control accessories such as sensor interfaces, zone controllers, or actuator adapters. Its integrated analog features suit measurement and threshold functions, while the 20 MHz AVR core can manage debouncing, state transitions, and communications. The 3 mm by 3 mm VQFN footprint helps limit board area in wall-mounted or distributed-control products. Because the MCU has only 4 KB of Flash, keep firmware modular and event-oriented. Use a solid exposed-pad ground plane, isolate sensitive analog routing from switching nodes, and verify all timing and electrical limits in the intended installation environment.

📊

Embedded Data Acquisition

The ATTINY416-MNR suits small data-acquisition products that sample a limited number of analog channels, perform local calculations, and transfer results through embedded peripherals. The device combines accurate analog features with a 20 MHz AVR processor, enabling configurable sampling and event handling without a larger microcontroller. Its 4 KB Flash is suitable for compact acquisition routines, and 256 bytes of SRAM provides limited working space for buffering and status variables. Keep acquisition timing independent from unnecessary background activity, place bypass capacitors close to the supply pins, and use the manufacturer pin-multiplexing table to assign analog and communications functions without conflicts.

📱

Consumer Control Accessories

The ATTINY416-MNR is well matched to compact consumer accessories that combine a simple user interface, sensor input, and local actuator control. A 20 MHz AVR core can handle debouncing, state-machine logic, and peripheral coordination, while the Event System supports responsive behavior without continuous polling. The 20-VQFN package helps minimize product size, and 4 KB of Flash can support a deliberately small feature set. Use ATTINY816-MNR when the user interface or protocol handling requires more program space without changing the PCB package. Validate button, display, and communication signal levels so the MCU operates within the manufacturer’s electrical limits.

🔧

ATtiny416 Evaluation Platforms

The ATTINY416-MNR is suitable for compact ATtiny416 evaluation hardware and application prototypes because it combines a 20 MHz AVR core, 4 KB of Flash, and advanced tinyAVR peripherals on a small 3 mm by 3 mm package. ATtiny416-based Xplained-style platforms provide a practical environment for evaluating programming, debugging, analog functions, and event-driven behavior. Keep the prototype layout representative of the final product by including a properly connected exposed pad and stable supply bypassing. If the prototype firmware approaches the 4 KB Flash limit, migrate to ATTINY816-MNR for 8 KB before release rather than reducing reliability through tightly packed code.

Ringkasan Produk Direkomendasikan

ATTINY416-MNR Microchip Technology Digunakan di dalam: Compact Industrial Sensor Modules, Low-Power IoT Sensor Nodes, Building Control Accessories, Embedded Data Acquisition, Consumer Control Accessories, ATtiny416 Evaluation Platforms ATTINY816-MNR Same-family controller with 8 KB Flash Digunakan di dalam: Compact Industrial Sensor Modules, Low-Power IoT Sensor Nodes, Building Control Accessories, Embedded Data Acquisition, Consumer Control Accessories, ATtiny416 Evaluation Platforms
What are the key specifications of ATTINY416-MNR that engineers should know?
The ATTINY416-MNR is a 20 MHz, 8-bit AVR microcontroller with 4 KB of Flash memory, 256 bytes of SRAM, and 128 bytes of EEPROM in a 20-VQFN package measuring 3 mm by 3 mm. According to Microchip’s ATtiny416/816 datasheet, the device includes an AVR processor with a hardware multiplier, an Event System, SleepWalking, accurate analog features, and advanced peripherals. These characteristics position it for compact embedded-control, sensing, and low-power peripheral applications where 20 MHz processing and several kilobytes of firmware are sufficient.
Where can I download the ATTINY416-MNR datasheet PDF?
The official ATTINY416-MNR datasheet PDF is available from Microchip’s ATtiny416/816 datasheet link on this page. It covers the 20 MHz AVR core, 4 KB Flash, 256-byte SRAM, 128-byte EEPROM, package information, peripherals, and operating characteristics. Use the manufacturer document as the controlling source for pin assignments, electrical limits, clock requirements, and programming guidance before laying out or qualifying a PCB.
Where can I find the ATTINY416-MNR pinout?
The ATTINY416-MNR pin assignments and the 20-VQFN land pattern are defined in Microchip’s ATtiny416/816 datasheet. The package uses a 3 mm by 3 mm VQFN outline with an exposed pad that is part of the thermal and ground design. Assign tracks from the package drawing rather than relying on a generic QFN footprint, because neighboring pins can carry alternate peripheral functions. The exposed pad also requires the layout and solder-mask guidance shown in the manufacturer package drawing.
What does ATTINY416-MNR mean in terms of memory and processing speed?
ATTINY416-MNR denotes an ATtiny416-series device rated for operation up to 20 MHz and configured with 4 KB of Flash, 256 bytes of SRAM, and 128 bytes of EEPROM. The 4 KB Flash region stores firmware, SRAM supports temporary execution data, and EEPROM preserves values when power is removed. Microchip describes the core as an AVR processor with a hardware multiplier, making it appropriate for compact embedded-control tasks that do not require a higher-memory MCU.
What is the difference between ATTINY416-MNR and ATTINY816-MNR?
ATTINY816-MNR increases the Flash memory from 4 KB to 8 KB while remaining within the same ATtiny416/816 tinyAVR 1-series family and 20-pin package family. The ATTINY416 is therefore preferable for the lowest firmware-memory requirement, whereas ATTINY816 offers additional program space for larger applications. Before using it as a direct replacement, verify pin assignments, peripheral multiplexing, operating limits, and whether the existing firmware and boot configuration remain unchanged.
Is ATTINY416-MNR suitable for low-power embedded control applications?
The ATTINY416-MNR is suitable for compact low-power embedded-control designs that fit within 4 KB of Flash and 256 bytes of SRAM. Its tinyAVR architecture includes SleepWalking, an event-driven Event System, and accurate analog features that can support responsive peripheral behavior. The final power budget still depends on the selected operating mode, clock configuration, enabled peripherals, and external circuitry, so measure the assembled design rather than estimating consumption from the CPU frequency alone.
What is the best drop-in replacement for ATTINY416-MNR?
The closest documented same-family candidate is ATTINY816-MNR, which uses the same 20-VQFN 3 mm by 3 mm package format and provides 8 KB of Flash instead of 4 KB. It is a credible drop-in candidate when the surrounding circuit and firmware do not depend on unavailable ATtiny416-specific behavior. Confirm the manufacturer pin table and electrical specifications before substitution. No cross-brand part was established as a true pin-to-pin replacement from the available cross-reference information.
Can ATTINY816-MNR replace ATTINY416-MNR on an existing PCB?
ATTINY816-MNR can serve as a same-family replacement candidate because it uses the same 20-VQFN 3 mm by 3 mm package format and retains the 20 MHz, 256-byte SRAM, and 128-byte EEPROM resources while increasing Flash from 4 KB to 8 KB. Confirm that every pin function, alternate-function mapping, reset behavior, and electrical limit remains acceptable for the installed firmware. Also verify that the larger Flash allowance does not change any memory-dependent application assumptions.
When should I choose ATTINY416-MNR over ATTINY816-MNR?
Choose ATTINY416-MNR when 4 KB of Flash is sufficient and a smaller program-memory footprint is desirable for firmware cost, validation, or resource planning. Choose ATTINY816-MNR when the application benefits from 8 KB of Flash while retaining the same 20 MHz core speed, 256-byte SRAM, and 128-byte EEPROM. Because the family shares important core resources, the decision should be driven primarily by firmware capacity, pin-level compatibility, and application requirements rather than clock speed.
Is ATTINY416-MNR suitable for sensor and industrial control modules?
The ATTINY416-MNR is well suited to compact sensor and industrial-control modules that benefit from an integrated 8-bit MCU, Event System, SleepWalking, and accurate analog functions. Its 20 MHz operating capability and 4 KB of program memory are appropriate for peripheral coordination, signal conditioning, state handling, and local communications. For industrial equipment, confirm operating-temperature limits, isolation requirements, EMC constraints, and regulatory obligations separately from the semiconductor specifications.
What is the ATTINY416-MNR power consumption?
The ATTINY416-MNR operating current depends on supply voltage, clock settings, active mode, sleep mode, enabled peripherals, and I/O activity, so it cannot be represented by one universal current value. Microchip’s ATtiny416/816 datasheet should be used to select the correct operating and sleep-mode conditions for the design. Measure the finished module at its intended voltage and workload because external sensors, pull resistors, communications, and regulator efficiency also affect the complete power budget.
How does ATTINY416-MNR support embedded communication and peripheral control?
ATTINY416-MNR uses the tinyAVR 1-series architecture, which integrates advanced peripherals together with an Event System and SleepWalking. These resources allow firmware to coordinate external sensors, actuators, communications, and timed control tasks without depending on a high-performance processor. The exact UART, SPI, I2C, timer, and pin-multiplexing configuration must be checked in the manufacturer pin table and datasheet because alternate functions can change when a physical pin is assigned.
Where can I buy ATTINY416-MNR online?
Use the Request a Quote form on this page to request ATTINY416-MNR availability, lead time, and a quotation for the exact MNR suffix and required quantity. The ATTINY416-MNR ordering code identifies the 20-VQFN package and tape-and-reel configuration. Confirm current lifecycle status, authorized sourcing, and shipment timing when placing the order, especially if the product is being introduced into a new production design.
What is the price of ATTINY416-MNR?
The Request a Quote form on this page provides the current commercial quotation for the exact ATTINY416-MNR ordering code and requested quantity. Price can vary with volume, packaging, schedule, and market conditions, so request the quantity and delivery terms you need rather than relying on a generic historical listing. This avoids confusion with other ATtiny416 package suffixes, tape-and-reel options, or similarly named devices that are not electrically and mechanically identical.
What is the lead time for ATTINY416-MNR?
The current lead time for ATTINY416-MNR should be confirmed through the Request a Quote form on this page by stating the required quantity, target date, and shipment destination. Lead time can change with inventory position, production scheduling, package configuration, and order volume. Microchip’s ATTINY416-MNR product listing shows the part as available to order, but that status alone does not guarantee a fixed delivery date for every quantity.
Is ATTINY416-MNR RoHS and REACH compliant?
The ATTINY416-MNR’s complete RoHS and REACH compliance status must be confirmed from Microchip’s current material or product documentation before it is declared compliant. The ATtiny416 family documentation discusses RoHS-related information, but a family statement does not automatically establish the status of every exact package suffix. If your procurement or quality process requires documentary proof, request the declaration covering ATTINY416-MNR through the Request a Quote form.

Data referensi engineering untuk ATTINY416-MNR — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose ATTINY416-MNR when a compact 8-bit controller provides enough capability for the application and minimizing firmware allocation is important. Its 20 MHz AVR core, 4 KB of Flash, 256-byte SRAM, 128-byte EEPROM, Event System, and SleepWalking support focused embedded-control, sensing, and low-power peripheral tasks. Choose ATTINY816-MNR when the same package and core resources are suitable but the firmware requires 8 KB rather than 4 KB of Flash. ATTINY816-MNR also preserves the 20 MHz clock, 256-byte SRAM, and 128-byte EEPROM, making it the preferred family progression when code capacity is the limiting factor. Before substituting either device, check the package drawing, electrical limits, pin multiplexing, programming configuration, and temperature requirements. Other package suffixes and cross-brand microcontrollers should not be assumed to be drop-in replacements merely because their advertised functions appear similar.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini ATTINY816-MNR
Brand Microchip Technology Microchip Technology
Package 20-VQFN (3 mm x 3 mm) 20-VQFN (3 mm x 3 mm)
Maximum CPU Clock 20 MHz 20 MHz
Flash Memory 4 KB 8 KB
SRAM 256 bytes 256 bytes
EEPROM 128 bytes 128 bytes
Processor Architecture 8-bit AVR with hardware multiplier 8-bit AVR with hardware multiplier
Event System Yes Yes
SleepWalking Yes Yes

Diferensiator Kunci

  • Lower Flash allocation for focused embedded tasks (vsATTINY816-MNR)
  • Same-family upgrade path without increasing clock speed (vsATTINY816-MNR)
  • Compact exposed-pad implementation (vsATTINY816-MNR)

Catatan Desain

Use the manufacturer’s 20-VQFN land pattern rather than a generic three-pad QFN footprint. The ATTINY416-MNR measures 3 mm by 3 mm, and its exposed pad is an electrical and thermal connection that must be soldered according to the package drawing. Confirm solder-mask and paste geometry, place the exposed pad on a continuous ground plane, and add multiple thermal vias near the center while maintaining clearance from sensitive analog and communication routes.

Place the supply bypass capacitor as close as practical to the VDD and ground connections, and route the exposed pad directly to a low-impedance ground plane. Decoupling requirements must be confirmed in the manufacturer datasheet because the correct capacitance, voltage rating, and ESR range depend on the device and clock configuration. Avoid splitting the ground return beneath the MCU, since even a small loop between the supply capacitor and pad can increase switching noise and reduce measurement accuracy.

Assign pins by function and then verify every alternate-function mapping in the manufacturer pin table. The 20-VQFN footprint provides limited routing escape options, and analog, communications, and timer functions may share pins. Route sensitive analog inputs away from digital clocks, high-current outputs, and inductor switching nodes. If the firmware later exceeds the 4 KB Flash budget, prefer a planned family migration to ATTINY816-MNR instead of adding board-level rework.

Do not treat ATTINY416-MNR, ATTINY416-MBT-VAO, and other suffix variants as interchangeable without checking the package dimensions, pin functions, temperature grade, and ordering configuration. The MNR suffix identifies a specific 20-VQFN 3 mm by 3 mm tape-and-reel configuration. Likewise, a shared package name alone does not establish drop-in compatibility; verify the exposed-pad arrangement and every signal assignment before releasing a substitution to production.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No definitive compliance declaration for the exact ATTINY416-MNR suffix was included. The automotive ATtiny416/417/816/817 document is a separate family document and does not establish automotive qualification for the standard ATTINY416-MNR.

Pencarian Terkait

attiny416 mnr attiny416 datasheet attiny416 xplained-nano attiny416 mfr attiny416 snr attiny416 xplained attiny416 arduino ATTINY416-MNR datasheet pdf ATTINY416-MNR pinout ATTINY416-MNR equivalent ATTINY416-MNR replacement ATTINY416-MNR vs ATTINY816-MNR ATTINY416-MNR 20MHz ATTINY416-MNR VQFN-20

Komponen dan Istilah Terkait

Microchip Technology ATTINY416-MNR ATTINY816-MNR AVR RISC 8-bit microcontroller tinyAVR 1-series embedded microcontroller 20 MHz 4 KB Flash 256-byte SRAM 128-byte EEPROM Event System SleepWalking accurate analog features hardware multiplier 20-VQFN VQFN family surface-mount technology SMD package picoPower technology industrial sensor modules IoT sensor nodes building control data acquisition Xplained platform
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ