Microchip Technology

ATTINY44-20PU - 20MHz 8-Bit AVR MCU | Microchip Technology

Teilenummer: ATTINY44-20PU ✓ Aktiv
14-pin PDIP Package 20 MHz Speed 4 KB (2K x 16 bits) Memory
MOQ: 1 |

ATTINY44-20PU Übersicht

The Microchip Technology ATTINY44-20PU is an 8-bit AVR microcontroller with a 20 MHz maximum clock, 4 KB of in-system programmable Flash, 256 bytes of EEPROM, and 12 I/O pins in a 14-pin through-hole DIP package. It combines an AVR enhanced RISC processor with timers, serial interfaces, ADC capability, and programmable I/O in a compact 14-pin package. The -20 suffix identifies the 20 MHz grade, while the PU package suffix denotes the 14-pin PDIP configuration.

An 8-bit microcontroller is a compact programmable controller built around a CPU, nonvolatile program memory, data memory, and peripheral interfaces. The ATTINY44 belongs to the ATtiny family, which sits within the AVR product family and broader embedded-controller hierarchy. Its single-clock-cycle instruction execution and 256-byte working register file make it suitable for responsive control tasks that do not require the memory or processing power of a 32-bit MCU.

Key device attributes include 4 KB Flash organized as 2K by 16 bits, 256 bytes of EEPROM, 12 I/O pins, and operation up to 20 MHz. The in-system programmable architecture allows firmware to be programmed or updated while the device is mounted in its application circuit. Peripheral resources support embedded sensing, timing, serial communication, and general-purpose control, although detailed converter and timer limits must be checked in the manufacturer datasheet before a specific design is released.

The AVR enhanced RISC architecture uses a compact instruction set designed for efficient embedded execution. Program storage remains nonvolatile, while SRAM supports working variables and stack operations. The device combines a RISC-like processing core with dedicated peripherals, allowing software and hardware timers to control motors, lamps, sensors, and communications interfaces without requiring a separate host processor.

Typical uses include compact industrial controls, hobby robotics, sensor nodes, LED sequencers, simple UART-connected instruments, and small standalone control boards. The 14-pin PDIP package also makes ATTINY44-20PU convenient for prototypes, educational kits, and through-hole assemblies where reworkability and socketed programming can be valuable. Its modest memory footprint suits finite-state control and monitoring tasks rather than demanding connectivity stacks or graphical workloads.

When designing the board, preserve the package pin assignments and route decoupling close to the supply pins. Confirm oscillator, programming, reset, and unused-pin requirements from the manufacturer datasheet. Use the in-system programming interface for firmware updates and validate timing margins before adding UART or timer-dependent functions. Check the selected fuse and clock configuration against the intended operating conditions.

This page combines the device specifications with application guidance, package-level information, verified pricing references, and practical replacement considerations. It is intended to accelerate component selection while keeping the final schematic, firmware, and production decisions grounded in the manufacturer documentation.

Drop-in-Alternativen für ATTINY44-20PU – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit ATTINY44-20PU (gleiche Bauform und Footprint) – abweichend in Flash Memory, General-Purpose Working Registers, Product Type.

Microchip Technology
Flash Memory: 4 KB (2K x 16), ISP
General-Purpose Working Registers: 32
Product Type: 8-bit AVR RISC-based microcontroller
Vergleichen mit ATTINY44-20PU →

ATTINY44A-PU

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Microchip Technology
📦 14-PDIP
8-bit AVR RISC-based microcontroller · picoPower AVR · 20 MHz · 4 KB (2K x 16), ISP · 256 bytes · 256 bytes · 12 · 32

Preis auf Anfrage

Datenblatt ansehen →

ATTINY44-20PU Grenzwerte & elektrische Eigenschaften

Product Type 8-bit AVR microcontroller
Maximale Taktfrequenz 20 MHz
Flash Memory 4 KB (2K x 16 bits)
EEPROM Memory 256 bytes
Number of I/O Pins 12 pins
CPU Architecture AVR enhanced RISC
Instruction Word Size 16 bits
General-Purpose Working Registers 8 registers
Program Memory Type In-system programmable Flash
Gehäuse 14-pin PDIP
Montageart Through-hole
UART Available
SPI Available

ATTINY44-20PU Pin-Konfiguration

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
Pin 1 VCC — Supply voltage input
Pin 2 PC0/A7 — Port C input/output pin with ADC alternate function
Pin 3 PC1/A8 — Port C input/output pin with ADC alternate function
Pin 4 PC2/A9 — Port C input/output pin with ADC alternate function
Pin 5 PC3/A10 — Port C input/output pin with ADC alternate function
Pin 6 GND — Ground connection
Pin 7 PB3/A11 — Port B input/output pin with alternate peripheral function
Pin 8 PB2/A12 — Port B input/output pin with alternate peripheral function
Pin 9 PB1/A13 — Port B input/output pin with alternate peripheral function
Pin 10 PB0/A14 — Port B input/output pin with alternate peripheral function
Pin 11 PA3/A15 — Port A input/output pin with ADC alternate function
Pin 12 PA2/A16 — Port A input/output pin with ADC alternate function
Pin 13 PA1/A17 — Port A input/output pin with ADC alternate function
Pin 14 PA0/A18 — Port A input/output pin with ADC alternate function

Typische Anwendungen

ATTINY44-20PU ist geeignet für 6 Anwendungs: Compact Industrial Control Module, UART Sensor and Diagnostic Console, LED Sequencer and Display Controller, Small Robotics and Motor Controller, Battery-Powered Sensor Node, Educational Robotics and Maker Controller.

🏭

Compact Industrial Control Module

The ATTINY44-20PU fits compact control modules that monitor inputs and operate relays, indicators, or actuators. Its 20 MHz clock provides useful timing margin for debouncing, state-machine execution, and periodic scheduling, while 12 I/O pins are sufficient for several inputs and outputs on a small board. The 4 KB Flash limit is the principal design constraint, so firmware should be compact and avoid unnecessary library overhead. Firmware can use the in-system programming interface to support production programming and later field updates without removing the device from its socketed or through-hole assembly.

🔧

UART Sensor and Diagnostic Console

The ATTINY44-20PU is appropriate for a UART-connected sensor or diagnostic console that converts readings into a compact command protocol. Its 20 MHz operating speed leaves room for interrupt-driven serial handling and application logic, while the 12 I/O pins can support an analog sensor, status LEDs, and a control output. The device's 256-byte EEPROM can retain configuration values when the application needs limited nonvolatile settings. Firmware size must remain below the 4 KB Flash capacity, and the serial baud rate, frame format, and pin assignments should be validated against the chosen UART implementation.

💡

LED Sequencer and Display Controller

The ATTINY44-20PU can drive LED sequences, status indicators, or simple display-control boards because its 12 I/O pins provide enough parallel outputs for several discrete functions. The 20 MHz clock supports precise timing updates and multiplexed patterns, while 4 KB of Flash is adequate for compact lookup tables and sequencing logic. A designer should account for current limits, driver transistors, and resistor sizing rather than driving loads directly from an I/O pin. In-system programming makes it convenient to update lighting patterns during assembly without redesigning the board.

🤖

Small Robotics and Motor Controller

The ATTINY44-20PU is useful as the supervisory controller in a small robot or hobby mechanism where it coordinates inputs, indicators, and low-power actuator commands. Its 20 MHz clock is suitable for responsive event handling and timer-based control, while the 14-pin PDIP package simplifies prototyping and repair. The available 4 KB Flash and 12 I/O pins require careful resource budgeting, especially if the design also runs motor algorithms or stores motion tables. Motor transients, grounding, and supply separation must be handled outside the MCU to prevent noise or overvoltage from affecting the controller.

🧩

Battery-Powered Sensor Node

The ATTINY44-20PU can serve as the logic core of a battery-powered sensor node when measurements, filtering, and communication can be handled in a small amount of code. Its 12 I/O pins allow connection of sensors and wake-capable peripherals, and the in-system programming interface simplifies development and maintenance. Low-power behavior depends on the selected operating mode, peripheral configuration, and external sensor load, so quiescent-current and wake-time values should be checked in the manufacturer datasheet. For duty-cycled operation, firmware should disable unused peripherals between measurements to reduce battery drain.

📱

Educational Robotics and Maker Controller

The ATTINY44-20PU is well suited to educational robotics and maker projects because it combines an approachable AVR architecture, a 20 MHz clock, and a straightforward 14-pin through-hole package. Students can program it in-circuit, use timer and serial functions in classroom exercises, and construct temporary sensors or motion-control demonstrations without a complex fine-pitch footprint. The 4 KB Flash and 256-byte EEPROM encourage disciplined code organization and provide enough persistent storage for simple settings. The same characteristics make it useful for open-source controller boards, provided the selected toolchain and board definition support the exact device variant.

What are the key specifications of ATTINY44-20PU that engineers should know?
The ATTINY44-20PU is an 8-bit AVR microcontroller rated for up to 20 MHz, with 4 KB of in-system programmable Flash, 256 bytes of EEPROM, and 12 I/O pins in a 14-pin PDIP package. According to the Microchip Technology device description, its AVR enhanced RISC architecture and eight working registers support efficient embedded control. These figures make the part appropriate for small control, timing, communication, and sensing systems, but memory-sensitive applications should verify the SRAM capacity before design commitment.
Where can I download the ATTINY44-20PU datasheet PDF?
The ATTINY44-20PU datasheet PDF can be accessed through the Microchip Technology document listing or through the manufacturer-linked Octopart datasheet page. The official device data covers the 20 MHz ATtiny44 grade, including memory organization, electrical characteristics, clock options, peripherals, programming interfaces, and package drawings. Use the manufacturer document for production release because third-party mirrors can reflect older revisions. The Octopart datasheet URL in the data sources provides a direct route to the latest linked Microchip documentation.
Where can I find the ATTINY44-20PU pinout?
The ATTINY44-20PU uses a 14-pin PDIP footprint, and its numbered pin assignments are shown in the manufacturer datasheet package and pin-description tables. The package contains 12 configurable I/O pins plus the supply and ground connections, with multiplexing such as ADC functions associated with selected I/O pins. Because alternate-function mapping can affect board routing, use the datasheet pin table when assigning SPI, UART, ADC, or programming signals rather than relying only on a generic DIP drawing.
How do I program an ATTINY44-20PU?
The ATTINY44-20PU is programmed through its in-system programming interface, allowing firmware to be written while it remains mounted in the target circuit. The manufacturer device description identifies its Flash as in-system programmable. In a typical workflow, a programmer connects to the programming interface and clock pins while the target supply is stable. Check the datasheet for the supported programming voltages, clock requirements, fuse behavior, and connector assignment before applying power or beginning a board layout.
ATTINY44 vs ATTINY84: which microcontroller is better for a project?
The ATTINY44 is the better choice when 4 KB of Flash and 12 I/O pins are sufficient, while the ATTINY84 offers a larger memory configuration and more peripheral capacity. The ATTINY44-20PU specifically combines 4 KB of in-system programmable Flash with 256 bytes of EEPROM and a 20 MHz clock in a 14-pin PDIP package. Choose it for compact control logic where minimizing Flash and board complexity matters; use the larger device when firmware growth, additional I/O, or more control resources justify the change.
Is ATTINY44 suitable for Arduino and embedded projects?
The ATTINY44 is suitable for Arduino-class and other embedded projects that fit its 4 KB Flash, 256-byte EEPROM, 12 I/O pins, and 20 MHz operating limit. The ATtiny44 is also widely associated with compact open-source controller boards, so its programming ecosystem is familiar to hobbyists and educators. Before choosing it for an Arduino-based design, confirm that the board definition, bootloader size, required libraries, and peripheral resources fit within the device memory and pin constraints.
What is the ATTINY44-20PU used for in common projects?
The ATTINY44-20PU is used for compact embedded controllers that need deterministic low-cost processing, nonvolatile firmware storage, and a modest number of I/O pins. Common projects include LED sequencers, motor-control modules, sensor interfaces, simple UART tools, robotics helpers, and small standalone instruments. Its 20 MHz clock supports responsive control loops, while 4 KB Flash and 256-byte EEPROM are sufficient for focused firmware. Larger user interfaces, data logging, or network stacks may exceed the available memory.
What is the best drop-in replacement for ATTINY44-20PU?
The closest same-manufacturer drop-in candidate is the ATTINY44A-PU because it uses the same 14-pin PDIP format and belongs to the same ATtiny44 family. Firmware, fuse, timing, and peripheral differences must still be checked before production substitution. The cross-reference results did not identify five qualified alternatives with the same package, pin compatibility, and parameters, so additional parts should not be treated as drop-ins without an engineering review of the datasheet and footprint.
Can ATTINY44-20PU replace an ATTINY84?
The ATTINY44-20PU can serve as a functional alternative to an ATTINY84 in some designs, but it is not automatically a drop-in replacement. The ATTINY44 provides 4 KB of Flash and 12 I/O pins, while the ATTINY84 family generally provides more Flash and I/O capacity. A board-level swap also requires matching the package and pin functions. Use the ATTINY44 only after confirming memory usage, exposed peripheral mappings, programming compatibility, and the exact package dimensions.
When should I choose ATTINY44-20PU over ATTINY84?
Choose the ATTINY44-20PU when a design can operate within 4 KB of Flash and 12 I/O pins and benefits from a compact, through-hole 14-pin microcontroller. Its 20 MHz grade provides more clock headroom than lower-speed ATtiny variants for timing-sensitive control. Select an ATTINY84 instead when the application needs substantially more program memory, data memory, or I/O. This choice reduces board complexity and potentially system cost without sacrificing essential control performance when resource estimates fit.
Is ATTINY44-20PU suitable for UART, sensor, and motor-control applications?
The ATTINY44-20PU is suitable for UART-linked instruments, analog sensor conditioning, and small motor-control tasks when the required peripherals and timing fit within the device. Its 12 I/O pins provide practical access for switches, indicators, sensors, and actuator drive signals, while the 20 MHz clock supports responsive firmware. Verify the specific peripheral assignments, ADC characteristics, timer resolution, and total pin requirements in the datasheet before finalizing a mixed-signal or motor-control board.
What is the price of ATTINY44-20PU?
The current price is presented through the Request a Quote form on this page, where the quantity and shipment requirement can be reviewed with the supply team. A public listing shows a unit reference of 0.6655 USD as of 2026-11, but it is a starting listing value rather than a complete quantity-break quotation. Use the Request a Quote form for a current purchase commitment and confirmation of availability.
Where can I buy ATTINY44-20PU online?
ATTINY44-20PU can be requested through the Request a Quote form on this page, which supports current commercial review for the exact 14-pin PDIP orderable MPN. The device is currently represented by multiple product listings, while lifecycle, stock, and lead-time commitments should be confirmed for each production order. Specify required quantity, date code preference, and shipping destination when submitting the request.
Is ATTINY44-20PU in stock and what is its lead time?
ATTINY44-20PU is currently shown as available for purchasing in public listings, but a production lead time should be confirmed through the Request a Quote form on this page. Availability can vary with quantity, date code, packaging configuration, and regional logistics. The request should state the required order quantity and production schedule so the supply team can confirm the current allocation and delivery commitment.
What does ATTINY44-20PU mean in the part-number suffix?
The ATTINY44 base designation identifies the AVR ATtiny44 microcontroller family, while the -20 suffix identifies the 20 MHz performance grade. The PU suffix denotes the 14-pin PDIP package, a through-hole format useful for prototyping, educational kits, socketed assemblies, and conventional through-hole PCB construction. The same electrical family may use other package or speed suffixes, but those alternatives should be ordered under their own exact manufacturer MPNs.

Technische Referenzdaten für ATTINY44-20PU – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the ATTINY44-20PU when a compact, through-hole AVR controller with a 20 MHz clock, 4 KB of Flash, 256 bytes of EEPROM, and 12 I/O pins satisfies the design. It is particularly suitable for simple sequencing, sensing, communication, and control functions that do not require substantial application memory. The ATTINY44A-PU is the closest same-package candidate, but it should be selected only after its manufacturer specifications are compared with the installed firmware and board assumptions. Do not substitute an ATtiny84 without confirming package dimensions, pin multiplexing, SRAM, flash usage, and peripheral assignments. For USB connectivity or materially greater processing and memory resources, move to a larger AVR or dedicated interface controller instead of forcing the ATTINY44 into a workload it was not designed to handle.

Vergleich mit Alternativen

Parameter Dieses Produkt ATTINY44A-PU
Brand Microchip Technology Microchip Technology
Package 14-PDIP 14-PDIP
Product Type 8-bit AVR microcontroller 8-bit AVR microcontroller
CPU Architecture AVR enhanced RISC AVR enhanced RISC
Mounting Type Through-hole Through-hole

Wichtigste Unterscheidungsmerkmale

  • 20 MHz operating grade in a compact 14-pin PDIP (vs. ATTINY44A-PU)
  • Compact 4 KB Flash configuration (vs. ATTINY44A-PU)
  • In-system programmability (vs. ATTINY44A-PU)

Designhinweise

Place the device programming connector, reset path, and decoupling according to the manufacturer reference configuration. The 14-pin PDIP footprint simplifies through-hole routing, but analog inputs and serial signals should remain away from noisy switching nodes. Preserve access to the programming interface after assembly so firmware can be updated in production and service without cutting traces.

Budget the 4 KB Flash limit before adding application features or large framework code. The 20 MHz clock provides timing margin, but power consumption still depends on clock selection, active mode, sleeping behavior, and enabled peripherals. Disable unused timers, communication interfaces, and analog blocks where practical, and confirm the operating-voltage range from the manufacturer datasheet before designing the supply network.

Do not treat an ATtiny84 board as automatically compatible with the ATTINY44-20PU. Although both devices are AVR-based and may expose familiar peripherals, Flash size, SRAM, I/O count, pin multiplexing, and package details can differ. Verify the exact schematic, footprint, fuse settings, and firmware memory map before using a smaller device as a replacement.

Use the manufacturer pin table as the authoritative mapping for all 14 pins, especially ADC-capable I/O pins. Keep sensitive analog inputs short, provide a stable reference arrangement when using the converter, and route high-current loads away from the MCU supply pins. Because the PDIP pins are exposed, add appropriate protection against conductive contamination and mechanical damage in uncontrolled environments.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The current product listings do not explicitly state the requested compliance attributes. AEC-Q100 is not applicable because the device is a general-purpose microcontroller rather than an automotive-qualified component.

Daten verifiziert am: 2026-11-14 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

attiny44 pinout attiny44 datasheet attiny44 programming attiny44 price attiny44 vs attiny84 attiny44 20ssu attiny44 vs attiny attiny44 arduino attiny44 projects attiny44 uart ATTINY44-20PU datasheet pdf ATTINY44-20PU pinout ATTINY44-20PU equivalent ATTINY44-20PU replacement ATTINY44-20PU footprint

Verwandte Bauteile & Begriffe

Microchip Technology ATTINY44-20PU ATTINY44A-PU AVR ATtiny44 8-bit microcontroller RISC microcontroller embedded controller semiconductor in-system programming AVR enhanced RISC architecture 4 KB Flash 256-byte EEPROM 12 I/O pins 20 MHz clock 14-pin PDIP DIP package family through-hole UART SPI ADC Arduino industrial control sensor node
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen