Broadcom

BCM56315A0KFEB - 24-Port Gigabit Ethernet L2 Switch ASIC | Broadcom

Teilenummer: BCM56315A0KFEB ✓ Aktiv
BGA, surface mount Package Gigabit Ethernet (10/100/1000BASE-T class ports) Speed
MOQ: 1 |

BCM56315A0KFEB Übersicht

Broadcom BCM56315A0KFEB is a 24-port Gigabit Ethernet Layer-2 multilayer switch controller (network controller) from Broadcom Limited, part of the Helix 1.5 switching family, supplied in a surface-mount BGA package for enterprise access, aggregation, and industrial Ethernet switching designs.

A network controller, in Broadcom's terminology, is a highly integrated switching silicon device that combines multiple Gigabit Ethernet MAC/PHY interfaces, frame processing, and Layer-2 switching control logic into a single IC. In the broader product hierarchy a switch controller sits below the networking switch category, below Ethernet switch ICs, and ultimately below integrated circuits and semiconductors. Instead of building a switch from dozens of discrete PHY and switching chips, an OEM designs one PCB around a single controller, which reduces board area, power consumption, and assembly cost while giving one programmable control plane for port configuration, QoS, and link management.

The headline characteristics of the BCM56315A0KFEB are its 24 Gigabit Ethernet ports and its Layer-2 multilayer switching architecture. Broadcom markets this device in its switch controller interface category, and the Broadcom Helix 1.5 designation identifies the generation of the silicon feature set it belongs to. Because the controller integrates the full switching datapath, the design engineer programs port speed, VLAN membership, and forwarding behaviour through a host interface rather than through discrete registers scattered across multiple devices.

The device is intended for designs where a single ASIC drives many copper ports. In practice this means access-layer switches, stackable or chassis-style access platforms, industrial and building-automation Ethernet switches, and smart-edge equipment with a large number of 10/100/1000BASE-T ports. Because all ports are served by one controller, port-to-port latency, per-port power, and system boot time are functions of the controller itself rather than of a chain of discrete devices, and thermal design must account for the concentrated dissipation of a single large die in a compact BGA footprint.

For board-level design, the critical first step is to obtain the package outline, ball map, and reference design from Broadcom's product documentation. The exact pin count, ball assignment, and exposed thermal land pattern must be taken directly from the manufacturer package drawing, because controller-level BGA packages are rarely publicly documented in detail and a wrong ball map is not recoverable in production. The controller also requires a stable clock reference, correct power-up sequencing across its core and I/O rails, and adequate PCB copper for heat spreading away from the exposed pad.

This page brings together the confirmed distributor catalogue footprint of the BCM56315A0KFEB, the documented package and ordering-code variants, the same-family drop-in alternatives, and the practical design guidance that a datasheet alone does not summarise - helping engineers qualify the part for a new Ethernet switching platform faster.

Drop-in-Alternativen für BCM56315A0KFEB – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit BCM56315A0KFEB (gleiche Bauform und Footprint) – abweichend in Switching Layer.

Broadcom
Switching Layer: Layer 2
Vergleichen mit BCM56315A0KFEB →

BCM56315A0KFEBG

✅ Drop-In
📦 BGA (Broadcom BCM56315 controller land pattern)
Identical die and land pattern; G suffix is the lead-free/green ordering code, so electrical and pin characteristics are unchanged (0% parameter difference)

📋 Referenzalternative (nicht im Katalog)

BCM56315A0KFBEG

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 BGA (Broadcom BCM56315 controller land pattern)
Same BCM56315 controller family and 24-port Gigabit Ethernet L2 feature set; suffix/finish marking differs only, no functional change expected

📋 Referenzalternative (nicht im Katalog)

BCM56316A0KFEB

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 BGA (Broadcom switch controller land pattern)
Same Broadcom controller family and L2 multilayer switching architecture with expanded switching capability; verify ball map against the Broadcom package drawing before substituting

📋 Referenzalternative (nicht im Katalog)

BCM56317A0KFEB

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 BGA (Broadcom switch controller land pattern)
Same Broadcom Helix-family L2 switch controller lineage with higher feature set; port count and ball map must be confirmed from the Broadcom datasheet

📋 Referenzalternative (nicht im Katalog)

BCM56314A0KFBG

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 BGA (Broadcom BCM56314 controller land pattern)
Adjacent Broadcom family member with comparable L2 switch controller integration; lower feature/port capability than the BCM56315A0KFEB (within the 30% drop-in floor)

📋 Referenzalternative (nicht im Katalog)

BCM56319A0KFEB

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Broadcom
📦 BGA (Broadcom switch controller land pattern)
Layer 2 Ethernet switch controller · 24 ports · 4 interfaces · Layer 2 · 1 Gb/s per Gigabit Ethernet port · 10 Gb/s per 10 Gigabit Ethernet interface · Broadcom Limited · Interface ICs

Preis auf Anfrage

Datenblatt ansehen →

BCM56315A0KFEB Grenzwerte & elektrische Eigenschaften

Device Type Network Controller / Switch Controller ASIC
Manufacturer Broadcom Limited
Port Count 24 Gigabit Ethernet ports
Switching Layer Layer-2 multilayer switch
Product Family Designation Helix 1.5
Category (Distributor Listing) Interface - Controllers
Schnittstellentyp Ethernet switch controller with host/management interface
Ethernet Speed Class Gigabit Ethernet (10/100/1000BASE-T class ports)
Package Type BGA, surface mount
Lead-Free / Green Ordering Code Variant BCM56315A0KFEBG listed separately by Broadcom Limited
Montageart Surface Mount

BCM56315A0KFEB bga, surface mount Pinbelegungsleitfaden

Pinbelegung für BCM56315A0KFEB (bga, surface mount-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für BCM56315A0KFEB im bga, surface mount-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für BCM56315A0KFEB.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

BCM56315A0KFEB ist geeignet für 6 Anwendungs: Enterprise Access-Layer Switch, Industrial and Building-Automation Ethernet Switch, Smart Edge and IoT Gateway, Network Equipment Controller and Chassis Platform, Gigabit Ethernet Media and Copper-to-Copper Aggregation, Automotive and Vehicle Network Switching.

🌐

Enterprise Access-Layer Switch

The BCM56315A0KFEB suits access-layer switch platforms that terminate 24 copper Gigabit Ethernet ports behind a single ASIC. Concentrating 24 ports in one controller reduces board area, per-port power dissipation, and assembly cost compared with a design assembled from discrete PHY and switching devices, and it gives the system one management path for port speed, VLAN assignment, and QoS. The trade-off is thermal concentration: a single large die in a compact BGA must be matched with adequate copper pour and via arrays around the exposed pad, and the host software must drive all 24 ports through the controller's management interface rather than through scattered discrete register sets.

🏭

Industrial and Building-Automation Ethernet Switch

Industrial gateways and building-automation panels often need many deterministic Ethernet ports in a small, rugged enclosure, which is exactly where the BCM56315A0KFEB's integrated 24-port Gigabit Ethernet Layer-2 controller pays off. A single device reduces the number of components that must be qualified for vibration, temperature extremes, and long-life supply, while the Layer-2 multilayer switching fabric keeps traffic handling local to the panel. Designers should still plan for the controller's concentrated die heat inside a sealed enclosure, keep high-speed port traces short and length-matched, and isolate the switch's noisy power rails from adjacent sensor and actuator circuitry.

🧩

Smart Edge and IoT Gateway

Smart-edge gateways that aggregate many sensor and camera feeds benefit from the BCM56315A0KFEB because 24 Gigabit Ethernet ports and Layer-2 forwarding are consolidated into one ASIC with one host interface. This lowers per-port power in battery- or PoE-adjacent designs and keeps switching latency deterministic at the edge rather than pushing aggregation to a back-end switch. The engineering constraint is system power budget: since switching is handled on-chip, the controller's own consumption scales with port activity, so port-speed policing and unused-port shutdown should be enabled in firmware to avoid paying full cost with idle links.

🖥️

Network Equipment Controller and Chassis Platform

Equipment controllers, chassis-based access platforms, and management appliances frequently need a high port count with a single, coherent switching silicon element, and the BCM56315A0KFEB delivers 24 Gigabit Ethernet ports with Layer-2 multilayer switching in one device. Using one controller simplifies the control-plane software model, because every port shares the same configuration and status register set instead of being spread across multiple parts. When integrating it into such a platform, confirm the Broadcom host interface requirements - reference clock, management bus, and reset timing - and reserve clean, separated supply rails for the controller core and its port I/O.

🔧

Gigabit Ethernet Media and Copper-to-Copper Aggregation

Aggregation nodes that combine multiple Gigabit Ethernet segments into a denser managed switch can use the BCM56315A0KFEB to terminate up to 24 links on one board. Doing so raises port density per square inch of PCB and reduces the number of clock, power, and reset domains a bring-up engineer has to characterise, which usually shortens schedule on first article builds. Care is needed at the signal layer: keep each 10/100/1000BASE-T PHY path over continuous reference planes, provide clean filtering and isolation between port supply and the controller, and validate magnetics placement against the port impedance budget in the Broadcom reference layout.

🚗

Automotive and Vehicle Network Switching

Vehicle Ethernet domain controllers and industrial-vehicle gateways are natural users of a 24-port Gigabit Ethernet Layer-2 controller such as the BCM56315A0KFEB, because one ASIC can terminate many network ports and localise Layer-2 traffic handling. Broadcom's Helix-generation controller family is used exactly for this kind of multi-port Ethernet termination. Before committing, confirm the automotive qualification status, the operating temperature grade, and the AEC-Q100 documentation for the exact ordering code, and design the thermal path so the controller's heat is spread into chassis copper rather than trapped against a sealed, low-conductivity enclosure.

Zusammenfassung der empfohlenen Produkte

BCM56315A0KFEBG Lead-free ordering code of the same controller Verwendet in: Enterprise Access-Layer Switch, Smart Edge and IoT Gateway, Gigabit Ethernet Media and Copper-to-Copper Aggregation, Automotive and Vehicle Network Switching BCM56316A0KFEB Higher-feature family member for upgrade paths Verwendet in: Enterprise Access-Layer Switch, Network Equipment Controller and Chassis Platform BCM56315A0KFBEG Alternate ordering code of the same controller for supply flexibility Verwendet in: Industrial and Building-Automation Ethernet Switch BCM56314A0KFBG Adjacent family member for cost-down port counts Verwendet in: Industrial and Building-Automation Ethernet Switch, Gigabit Ethernet Media and Copper-to-Copper Aggregation BCM56319A0KFEB Broadcom Verwendet in: Smart Edge and IoT Gateway, Automotive and Vehicle Network Switching BCM56317A0KFEB Same-family controller for chassis designs needing more capacity Verwendet in: Network Equipment Controller and Chassis Platform
What is the BCM56315A0KFEB?
The BCM56315A0KFEB is a Broadcom Limited 24-port Gigabit Ethernet Layer-2 switch controller, marketed as a network controller in the Helix 1.5 switching family. It integrates 24 Gigabit Ethernet ports and Layer-2 multilayer switching control logic into one surface-mount BGA device, so an OEM can build a multi-port Ethernet switch around a single controller ASIC rather than a bank of discrete PHY and switching chips. Distributor catalogues classify it under Interface - Controllers.
How many Gigabit Ethernet ports does the BCM56315A0KFEB support?
The BCM56315A0KFEB provides 24 Gigabit Ethernet ports in a single controller. Distributor product listings for this part describe it as a 24-port Gigabit Ethernet L2 switch, which allows one PCB to terminate 24 copper 10/100/1000BASE-T ports while the switching datapath, port configuration, and Layer-2 forwarding tables are handled by one ASIC. Use the manufacturer package drawing and datasheet to confirm the ball map and per-port PHY arrangement before layout.
What is the difference between BCM56315A0KFEB and BCM56315A0KFEBG?
The BCM56315A0KFEBG is the green, lead-free ordering code of the same Broadcom BCM56315 device, listed by Broadcom Limited as a separate catalogue entry from the non-G BCM56315A0KFEB. Functionally the two are the same switch controller, so they share the same die, package, ball map, and pin compatibility. Choose the G-suffixed code for new designs that require a lead-free/RoHS-compliant ordering code, and use the base code where legacy BOM continuity matters.
Where can I download the BCM56315A0KFEB datasheet PDF?
The BCM56315A0KFEB documentation is published by Broadcom Limited and is reachable through datasheet aggregators such as datasheets.com, which hosts the BCM56315A0KFEBG datasheet PDF, and through the Broadcom product page for the device family. Because switch controller datasheets are often released under Broadcom controlled distribution, request the current revision directly from Broadcom or your authorised representative when a controlled copy is required for design sign-off.
Where do I find the BCM56315A0KFEB pinout and package drawing?
The BCM56315A0KFEB pinout and ball map are in the manufacturer package drawing published with the Broadcom switch controller documentation, and are not reproduced in the distributor listings that describe this part as a 24-port Gigabit Ethernet L2 switch. Use the ball map in the Broadcom package outline when assigning PCB traces and the exposed-pad land pattern for thermal vias, and verify the pin count and ball coordinates against the exact ordering code you are placing, since ordering-code variants can differ in lead finish but not in land pattern.
What is the difference between BCM56315A0KFEB and BCM56316A0KFEB?
Both are Broadcom Limited Layer-2 multilayer Gigabit Ethernet switch controllers in the same controller family, and the BCM56315A0KFEB is the 24-port Gigabit Ethernet part. The BCM56316A0KFEB adds further switching capability in the same family lineage, so it is the natural upgrade path when port count or feature set must grow while retaining the same software and board approach. Confirm the port count and package of the BCM56316A0KFEB against the manufacturer datasheet before treating it as a footprint-for-footprint substitution.
When should I choose the BCM56315A0KFEB instead of the BCM56315A0KFEBG?
Choose the BCM56315A0KFEB when your design must maintain continuity with an existing Broadcom BOM or a legacy design that already uses the non-G ordering code, and where lead-free ordering-code requirements are not binding. Choose the BCM56315A0KFEBG for any new design that must be released as lead-free/RoHS-compliant. Both are the same 24-port Gigabit Ethernet L2 switch controller die, so there is no electrical or firmware difference between them - only the ordering and compliance marking changes.
Is the BCM56315A0KFEB suitable for enterprise access-layer switching?
Yes, the BCM56315A0KFEB is well matched to access-layer and aggregation switching equipment because it integrates 24 Gigabit Ethernet ports and Layer-2 multilayer switching in one controller. Concentrating 24 ports behind a single ASIC reduces board area, per-port power, and assembly cost compared with a design built from discrete switching and PHY devices, and it gives one host interface to manage port speed, VLANs, and QoS across all ports. Verify thermal design and the package land pattern with the Broadcom reference design.
What is the best drop-in replacement for the BCM56315A0KFEB?
The closest drop-in replacement for the BCM56315A0KFEB is the BCM56315A0KFEBG, the green/lead-free ordering code of the identical Broadcom device - same die, same BGA land pattern, same pinout, and full parameter equivalence. Other same-family Broadcom controllers such as the BCM56316A0KFEB and BCM56317A0KFEB can serve as drop-in choices when a larger feature set is acceptable, but they must be checked against the manufacturer package drawing before use.
Can the BCM56315A0KFEB replace the BCM56316A0KFEB?
The BCM56315A0KFEB can substitute for the BCM56316A0KFEB only if the design does not depend on the extra switching capability of the BCM56316A0KFEB, and only after the Broadcom package drawings confirm identical ball-out and the same power rails and clocking. Because these are Broadcom switch controller ASICs with documented per-model feature differences, treat any substitution as a formal re-qualification of the port configuration, forwarding table sizing, and host software rather than as a like-for-like swap.
Where can I buy BCM56315A0KFEB online?
The BCM56315A0KFEB is listed by Broadcom Limited across major distributor networks, including DigiKey, Mouser, and Octopart, which aggregates stock from several authorised channels. To obtain a current quotation, quantity breaks, and the lead time for this exact ordering code, submit a request through the Request a Quote form on this page; the form returns an up-to-date market quote based on quantity, date code, and current supply conditions.
What is the price of the BCM56315A0KFEB?
Pricing for the BCM56315A0KFEB depends on order quantity, date code, and current allocation, and is not fixed by the manufacturer for this device. Request the current price, volume-break schedule, and stock position through the Request a Quote form on this page, which returns a quotation for the exact part number and quantity you enter rather than a static list price.
What is the lead time for the BCM56315A0KFEB?
Lead time for the BCM56315A0KFEB varies with current supply and allocation, and Broadcom does not publish a fixed lead time for this ordering code. Submit a Request a Quote on this page with your required quantity and target date to obtain the current lead time and stocking options, including reel quantity and date-code requirements.
Is the BCM56315A0KFEB in stock?
The BCM56315A0KFEB is currently offered through the Broadcom Limited distributor network, with aggregated availability visible across several authorised channels, and one catalogue source listing thousands of units. Stock levels move daily, so confirm live inventory and allocation for your required quantity through the Request a Quote form on this page rather than relying on a cached listing figure.
What are the key specifications of the BCM56315A0KFEB that engineers should know?
The BCM56315A0KFEB is a Broadcom Limited 24-port Gigabit Ethernet Layer-2 multilayer switch controller, sold as a network controller and listed in the Interface - Controllers category, in a surface-mount BGA package. It belongs to the Helix 1.5 switching generation, and the BCM56315A0KFEBG lead-free ordering code of the same device is separately catalogued. Every port, management feature, and host interaction is handled by one ASIC, which is the core engineering fact when planning power, thermal, and layout budgets.
What can replace the BCM56315A0KFEB?
What can replace the BCM56315A0KFEB depends on how strict your requirement is. The BCM56315A0KFEBG is a like-for-like drop-in choice because it is the same device with a lead-free ordering code. If you need more ports or more switching features, other Broadcom controllers in the same family, such as the BCM56316A0KFEB or BCM56317A0KFEB, are the natural upgrade path, provided the package drawing confirms the same ball-out and your port and software requirements are met.
Is the BCM56315A0KFEB the same as the BCM56315A0KFEBG?
Yes, the BCM56315A0KFEB and the BCM56315A0KFEBG are the same Broadcom switch controller: a 24-port Gigabit Ethernet Layer-2 multilayer device in the Helix 1.5 family. The G suffix denotes the green, lead-free ordering code, so the silicon, package, and pinout are identical and either can be substituted without a board change. The only functional decision is which ordering code your compliance documentation requires.
What Broadcom equivalent should I choose for a 24-port Gigabit Ethernet L2 switch design?
Broadcom's own BCM56315A0KFEB and its green counterpart BCM56315A0KFEBG are the closest matches for a 24-port Gigabit Ethernet Layer-2 switch controller, because they are the same controller die with identical package and pinout. There is no equivalent switch ASIC from another manufacturer that matches the Broadcom Helix feature set, host software model, and reference design, so a second-source strategy normally means working with Broadcom on a different ordering code rather than changing silicon vendors. Route sourcing questions through the Request a Quote form on this page.

Technische Referenzdaten für BCM56315A0KFEB – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the BCM56315A0KFEB when your design terminates up to 24 Gigabit Ethernet ports on a single board and you want one Broadcom Layer-2 controller to handle port configuration, VLANs, and QoS. Choose the BCM56315A0KFEBG for any new release that must carry a lead-free/green ordering code; it is the same silicon and needs no schematic or layout change. Move to the BCM56316A0KFEB or BCM56317A0KFEB when you need more switching capability than the 24-port configuration provides, after confirming the ball map against the Broadcom package drawing. Use the BCM56314A0KFBG for cost-down builds with fewer required ports, and the BCM56319A0KFEB for aggregation platforms that need higher capacity. No cross-manufacturer equivalent exists for this feature set, because the switching datapath, host software model, and reference design are Broadcom-proprietary; second sourcing is realistically handled through ordering-code variants rather than a different silicon vendor.

Vergleich mit Alternativen

Parameter Dieses Produkt BCM56315A0KFEBG BCM56315A0KFBEG BCM56316A0KFEB BCM56317A0KFEB BCM56314A0KFBG BCM56319A0KFEB
Package BGA, surface mount (Broadcom BCM56315 controller land pattern) BGA - identical land pattern BGA - identical land pattern BGA - same family, confirm ball map BGA - same family, confirm ball map BGA - adjacent family BGA - same family, confirm ball map
Brand Broadcom Broadcom Broadcom Broadcom Broadcom Broadcom Broadcom
Device Type 24-port Gigabit Ethernet L2 multilayer switch controller (network controller) 24-port Gigabit Ethernet L2 switch controller Same-family Layer-2 switch controller Layer-2 multilayer switch controller Layer-2 multilayer switch controller Layer-2 switch controller, reduced capability Layer-2 switch controller, expanded capability
Switching Layer Layer-2 multilayer switch Layer-2 multilayer switch Layer-2 multilayer switch Layer-2 multilayer switch Layer-2 multilayer switch Layer-2 switch controller Layer-2 switch controller
Ordering Code / Lead-Free Suffix BCM56315A0KFEB (base ordering code) G-suffixed green/lead-free ordering code G-suffixed ordering code Base ordering code Base ordering code G-suffixed ordering code Base ordering code

Wichtigste Unterscheidungsmerkmale

  • 24 Gigabit Ethernet ports consolidated into one Layer-2 controller ASIC (vs. BCM56314A0KFBG)
  • Lead-free ordering code available without any electrical change (vs. BCM56315A0KFEB)
  • Single-host-control-plane switching architecture (vs. BCM56319A0KFEB)

Designhinweise

Estimated: concentrating 24 Gigabit Ethernet ports in one controller concentrates the die heat in a single area of the PCB. The controller's dissipation depends on port activity, which you control, so enable unused-port shutdown and port-speed policing in firmware to lower average power. Route the exposed-pad land pattern into a broad copper pour with a regular via array rather than into a thin thermal strip, and keep inductors, magnetics, and other heat sources physically away from the controller's under-bump area. Junction targets, thermal pad geometry, and the via pattern must come from the Broadcom package drawing and reference design.

The ball map and exposed-pad geometry for this BGA controller are defined in the Broadcom package drawing, and they must be transcribed without interpretation. Assign tracks directly from the ball map table in the datasheet and the package outline, and verify the land pattern against the exact ordering code placed, since ordering-code variants change the finish marking but not the land pattern. Reserve clean, separate supply rails for the controller core and its port I/O, place the decoupling network at the associated ball group, and provide a defined reset/clock sequence so that port links come up in a controlled order.

Because one controller serves all 24 ports, the power budget of the switch board is set by the controller rather than by a sum of many small PHYs. Sequence the rails so the core supply is stable before the port I/O supply ramps, keep the switching core's supply free of the port-side switching noise, and use separate filtering paths for the management/host rails. Validate the rail sequencing and current step at power-up in the hardware bring-up plan, since an uncontrolled inrush from 24 simultaneous port starts is a common early-revision failure mode in multi-port designs.

Two recurring mistakes derail multi-port switch bring-up. First, treating the controller as a generic PHY and distributing its host interface across several bus segments without following the Broadcom reference design; the management path must be a single coherent topology with defined timing. Second, leaving per-port magnetics and the Ethernet traces unmanaged, which can introduce crosstalk between adjacent ports once all 24 ports run at line rate simultaneously. Bring up one port at a time with the loopback and link-training checks defined by the platform, and only then enable the full port population.

Estimated: a 24-port controller switching at line rate generates significant high-frequency activity on a compact board. Keep the Layer-2 datapath and its clocking away from low-level analog, sensor, or audio paths on the same assembly, and use the recommended spread-spectrum or filtered reference clock arrangement where the platform design guide specifies it. Provide a solid, continuous ground reference under the controller region so the exposed pad and the ball field share a low-impedance return, and keep high-current port supply paths from crossing under the clock distribution network.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The G-suffixed ordering code BCM56315A0KFEBG indicates a green/lead-free variant in the Broadcom catalogue, but no RoHS, REACH, halogen-free, or conflict-minerals declaration was published in the distributor listings for either ordering code, so all fields remain unknown pending the Broadcom product documentation.

Daten verifiziert am: 2026-11-20 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

BCM56315A0KFEB BCM56315A0KFEB datasheet BCM56315A0KFEB datasheet pdf BCM56315A0KFEB pinout BCM56315A0KFEB footprint BCM56315A0KFEB equivalent BCM56315A0KFEB replacement BCM56315A0KFEB vs BCM56315A0KFEBG Broadcom BCM56315 24 port gigabit switch BCM56315A0KFEB price BCM56315A0KFEB stock 24 port gigabit ethernet L2 switch controller Broadcom Helix 1.5 switch controller BCM56315 access layer switch design BCM56316A0KFEB vs BCM56315A0KFEB

Verwandte Bauteile & Begriffe

Broadcom Broadcom Limited BCM56315A0KFEB BCM56315A0KFEBG BCM56315A0KFBEG BCM56316A0KFEB BCM56317A0KFEB BCM56314A0KFBG BCM56319A0KFEB network controller switch controller Ethernet switch controller Layer-2 multilayer switch Gigabit Ethernet 10/100/1000BASE-T integrated circuit semiconductor BGA package surface mount Helix 1.5 enterprise access switch industrial Ethernet switch smart edge gateway Ethernet aggregation switching fabric management interface exposed thermal pad
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen